TruSens N-200 Ultrasonic Humidifier Owner’s Manual
- June 4, 2024
- TruSens
Table of Contents
TruSens N-200 Ultrasonic Humidifier Owner’s Manual
WELCOME TO COMFORTABLE INDOOR AIR.
Control your air and achieve your optimal humidity with TruSens. Real-time feedback from a remote SensorPod’ helps your humidifier monitor and adjust to your ideal moisture levels.
WARNING
Before operation, follow these steps and read our TruSens Owner’s Manual at
www.trusens.com/support/owners-manuals/
Included in your box
- 1 Humidifier + Power Cord
- 1 Sensor Pod + 2 AAA Batteries
- 1 Water Filter
- 1 Absorbent Aromatherapy Pad
Directions for use
WARNING Always unplug the humidifier before removing the water tank. Empty all water before cleaning water tank, replacing filter or moving the humidifier. Only place the water tank on a hard, solid surface; do not place on carpeting.
Prepare the water filter
Remove plastic bag from filter. For optimal performance, submerge filter in bowl of water for 1 hour.
Install the water filter
-
a) Unscrew gray cap.
-
b) Secure the filter onto gray cap.
-
c) Tightly secure gray cap with filter onto water tank until indicator meets lock symbol. Failure to properly tighten gray filter cap may result in leaking. Return water tank on top of base.
Fill the water tank
Remove water tank lid and fill with room temperature water (preferably distilled) with pitcher.
WARNING
Do not pour water into the mist outlet or directly into the base/reservoir.
CAUTION: Heavy object. To avoid injury always fill tank from the top and
use care when lifting.
Set up
Place humidifier on a dry, firm, flat surface that is free from obstructions.
Note: Failure to properly tighten gray filter cap may result in leaking.
Open lid of battery chamber found on SensorPod (bottom) and insert 2 AAA
batteries (provided).*
SensorPod will automatically begin monitoring if humidifier is on.
For optimal results, place SensorPod on a tabletop or counter across the room, within line of sight of the humidifier.
Control the humidifier with the touch buttons on SensorPod.
Control Panel
Power: on/off
Filter Change Indicator
Timer: 2h/4h/8h/1 2h
Target Humidity: decrease/increase
Misting Speed Settings: 1/2/3/AUTO
Dimmer: on/off
Aromatherapy Use
Locate the Aromatherapy Tray (back of the base) and pull down the lid. Add a few drops of essential oil* to the absorbant aromatherapy pad (provided) and close tray.
- Only use 100% natural essential oils.
WARNING
Do not add essential oils to the water tank. Do not use synthetic fragrances.
Cleaning Instructions
We recommend you clean weekly for optimal performance. Refer to Owner’s Manual for detailed instructions.
WARNING
Unplug the humidifier before cleaning.
Filter Replacement
Filter Type | Suggested Replacement | Item Number |
---|---|---|
Water Filter | 4 months* | WSF300-01 |
*Filter Change Indicator on control panel will glow red to notify you to change.
Change the water filter before restarting after long periods of non-use.
support@trusens.corn | 1-833-TRUSENS
(1-833-878-7367)
Support and Warranty Terms at www.trusens.com
02022 ACCO Brands. All rights reserved. TruSens”, U- + Design and SensorPod- are trademarks of ACCO Brands.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>