TruSens N-200 Humidifier User Guide
- June 6, 2024
- TruSens
Table of Contents
N-300 Humidifier Quick Start Guide
7.6 x 7.6 inches (19.3 cm)
WELCOME TO COMFORTABLE INDOOR AIR.
Control your air and achieve your optimal humidity with TruSens. Real-time
feedback from a remote SensorPodTM helps your humidifier monitor and adjust to
your ideal moisture levels.
WARNING Before the operation, follow these steps and read our TruSens Owner’s Manual at www.trusens.com/support/owners-manuals.
Included in your box
l Humidifier+ Power Cord
l Sensor Pod + 2 AAA Batteries
l Water Filter
l Absorbent Aromatherapy Pad
©2021 ACCO Brands. All rights reserved. TruSens7v, U Design’TM, SensorPor and PureDirecr are trademarks of ACCO Brands.
Directions for use
WARNING Always unplug the humidifier before removing the water tank. Empty all water before cleaning the water tank, replacing the filter or moving the humidifier. Only place the water tank on a hard, solid surface; do not place it on carpeting.
-
Prepare the water filter
Remove the plastic bag from the filter. For optimal performance, submerge the filter in a bowl of water for 1 hour. -
Install the water filter
a) Unscrew the gray cap.
b) Secure the filter onto the gray cap.
c) Tightly secure gray cap with filter onto water tank until indicator meets lock symbol. The return water tank is on top of the base. -
Fill the water tank
Remove the water tank lid and fill with room temperature water (preferably distilled) with the pitcher.
WARNING Do not pour water into the mist outlet.
CAUTION: Heavy object. To avoid injury always fill the tank from the top and use care when lifting. -
Set up Place humidifier on a dry, firm, flat surface that is free from obstructions.
Do not place humidifiers on carpeting or wooden floors; waterproof mats are recommended.
Open lid of battery chamber found on SensorPod (bottom) and insert 2 AAA batteries (provided).
SensorPod will automatically begin monitoring if the humidifier is on.
For optimal results, place SensorPod on a tabletop or counter across the room, within line of sight of the humidifier. Control the humidifier with the touch buttons on SensorPod.
Control Panel
| Power: on/off
---|---
Filter Change Indicator
Timer: 2h/4h/8h/1 2h
Target Humidity: decrease/increase
Speed: AUTO/1/2/3
Dimmer: on/off
Aromatherapy Use
Locate the Aromatherapy Tray (back of the base) and pull down the lid. Add a few drops of essential oil* to the absorbant aromatherapy pad (provided) and close tray.
- Only use 100% natural essential oils.
WARNING Do not add essential oils to the water tank. Do not use synthetic fragrances.
Cleaning Instructions
We recommend you regularly clean your humidifier with a clean, damp cloth.
WARNING Unplug the humidifier before cleaning.
Filter Replacement
| Filter Type | Suggested Replacement | Item Number |
|---|---|---|
| Water Filter | 4 months* | WSF300-01 |
*Filter Change Indicator on the control panel will glow red to notify you to change.
Change the water filter before restarting after long periods of non-use.
[email protected]
I 1-833-TRUSENS (1-833-878-7367)
Support and Warranty Terms at www.trusens.com
READ AND SAVE THESE INSTRUCTIONS / READ THE LABEL AND ANY OPERATING
MANUAL BEFORE USING
PRECAUTIONS
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature. Unplug or disconnect the appliance from
the power supply before cleaning the base.
WARNING: To reduce the risk of fire or electric shock, do not use this appliance with any solid-state speed control device. Do not operate any humidifier with a damaged cord or plug, or if the wall socket is loose. Do not run cord under carpeting, throw rugs, runners, or similar coverings. Do not run cord under furniture or appliances.Arrange cord away from traffic area and where it will not be tripped over.
- Never handle the plug with wet hands.
- Remove all packaging, including the filter bag, before use.
- Unplug the humidifier and empty the water tank before moving. Always carry by the base.
- Always place the appliance on a dry, firm, flat surface that is free from obstructions.
- Appliances that are obviously damaged must not be operated.
- Do not pour water into the mist outlet or chimney.
- Always fill the water tank with clean, cold water. Do not overfill the water tank.
- If you have concerns with your local water quality or if you have especially hard water, use distilled water.
- Always place the water tank directly onto the base when there is water in the tank.
- Do not add essential oils directly to the water tank. Do not use synthetic fragrances.
- Always empty any water from the water tank before cleaning or before replacing the filter.
- Locate humidifier near the outlet wall socket and do not use extension cords.
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
- KEEP OUT OF THE REACH OF CHILDREN. Children shall not play with the appliance.
- Do not attempt to service or repair this product yourself.
- Only use the humidifier with the power cable provided.
- Only clean this machine with a damp cloth, do not use solvents or bleach.
- Do not place any part of the humidifier in a dishwasher.
- Do not submerge the base reservoir underwater at any time.
- Do not block or obstruct the mist outlet or chimney.
- Do not insert fingers or other items into the mist outlet or chimney.
- Do not place foreign objects in the water tank or base reservoir.
- When the humidifier is in standby mode the SensorPod is still transmitting a signal/data.
- Replace any leaking batteries immediately. Remove the batteries if the appliance is being stored for long periods.
- Safely dispose of or recycle used batteries per local regulations.
WARNING: The water and heater may cause burns. Unplug the humidifier and
let cool before cleaning.
WARNING: Skin or eye damage may result from directly viewing the light
produced by the lamp in the .. apparatus.
This appliance contains an LN-CC bulb. Avoid exposing the eyes and skin to LNG radiation as it may cause eye and skin injury.
- This appliance contains a UVC emitter.
- Unintended use of the appliance or damage to the housing may result in exposure to UVC radiation.
- UVC radiation may cause eye and skin irritation.
- Avoid exposing eyes and skin to LNG radiation.
FIRST AID INSTRUCTIONS – Seek medical attention in event of injury.
The use of this device is a supplement to and not a substitute for standard
infection control practices; users must continue to follow all current
infection control practices, including those practices related to cleaning
and disinfection of environmental surfaces.
CONFORMITY INFORMATION
Sensor: FCC ID: GV3-21SPOH1 IC: 6128A-21SPOH1 www.trusens.com
This device complies with Part 18 of the FCC rules. This device complies with
Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Modifications: Any modifications made to this device that are not approved by ACCO Brands may void the authority granted by the user by the FCC and/or Industry Canada to operate this equipment.
CAN ICES-003(B)/NMB-003(B)
This device complies with Industry Canada RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ACCO Brands
101 O’Neil Road
Sidney, NY 13838
Tel: 607-563-9411
Customer Support
E-mail: [email protected]
Tel: 1-833-TRUSENS
(1-833-878-7367)
ACCO Brands Canada Inc.
7381 Bramalea Road
Mississauga, ON L5S 1 C4
Tel/Tel: 1-800-268-3447
E-mail: [email protected]