TruSens Z-3500 Smart Air Purifier with Power Cord User Guide

June 6, 2024
TruSens

Welcome to clean air with TruSens. Thank you for allowing us to join you on your journey towards wellness.
The air you breathe should be clean, no matter where you are in the room. TruSens SensorPodTM, PureDirectTM Technology & DuPont’ Filtration ensure the whole room benefits from cleaner air.

IMPORTANT: Before operating of the purifier, follow the steps and read our TruSens Owner’s Guide at www.trusens.com/z-3500

Included in your box

1 Air Purifier + Power Cord
1 SensorPod’ + Adapter

Download the TruSens app and follow the instructions to connect a smart device to your purifier.
02020 ACCO Brands. All rights reserved. DuPont” & the Oval logos are trademarks or registered trademarks of EJ. du Pont de Nemours and Company used under license.

  1. Remove the plastic bag from the filter
    Unscrew the bottom cover and remove the plastic bag from the filter.

  2. Re-attach filter
    Secure the filter on the bottom cover and replace it inside the purifier.

  3. Set up

Plugin your air purifier unit and power it on. Plug-in your SensorPodTM. For optimal results, place SensorPodTM on a tabletop or counter across the room, within line of sight of the purifier. Signal strength may vary by location.
Download the TruSens app to connect a smart device to your purifier.

Filter Replacement
Filter Type Suggested Replacement/Cleaning Item Number
1 Washable Prefilter Hand wash as needed with water

see HEPA Drum Filter
2| Carbon Filter| Every 3 – 4 months| AFC-Z3000-01 (3-pack)
3| HEPA Drum Filter| Every 12-15 months
| AFH-Z3000-01 (includes00and 0)
4| UV Bulb| _ Every 2-3 years*| UVL-Z3000-01

  • Replacement indicator will glow red on the control panel to notify you to change
Control Panel

READ AND SAVE THESE INSTRUCTIONS

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. Unplug or disconnect the appliance from the power supply before replacing filters or UV lamp, or when the appliance is not in use.
WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device. Do not operate any purifier with a damaged cord or plug, or if the wall socket is loose. Do not run cord under carpeting, throw rugs, runners, or similar coverings. Do not run cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
WARNING: Skin or eye damage may result from directly viewing the light produced by the lamp in this apparatus. Always disconnect power before relamping or servicing. Replace lamp with UVLZ2000-01 (for Z-2500), or UVLZ3000-01 (for Z-3500).

  • Remove all packaging, including the filter bag, before use.
  • Appliances that are obviously damaged must not be operated.
  • This appliance must only be connected to a wall socket outlet matching the supply plug type and rating stated on the rating plate.
  • Locate air purifier near the outlet wall socket and do not use extension cords.
  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Children shall not play with the appliance.
  • Replace the UV lamp with the models specified within this manual.
  • Do not attempt to service or repair this product yourself.
  • Only use the purifier and SensorPodTM with the power cable provided.
  • Only clean this machine with a damp cloth, do not use solvents or bleach.
  • Ensure the appliance is always placed on a firm level surface before operation.
  • Do not block or obstruct the air intake or outlet vents.
  • Do not insert fingers or other items into the air intake or outlet vents.
  • When the air purifier is in standby mode the SensorPodTM is still transmitting signal data.

Z-2500: FCC ID: GV3-20Z3X00A IC: 6128A-20Z3X00A
Z-3500: FCC ID: GV3-20Z3X00A IC: 6128A-20Z3X00A
SensorPodTM -M: FCC ID: GV3-20SPOM1A IC: 6128A-20SPOM1A

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement: This equipment should be installed and operated with a minimum distance of 20cm between the radiator and all persons.

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals