Kami True Wireless Earbuds Instruction Manual
- June 4, 2024
- Kami
Table of Contents
EB56
Wireless Earbuds
Instruction Manual
Package list
-Wireless earbuds
-Charging case
-Charging cable for case
-Insturction manual
-Packaging box
Product Specifications
- Model: EB56
- Bluetooth version: 5.0
- Bluetooth chipset: JL6969
- Battery capacity: 30mAh
- Charging case capacity: 200mAh, can charge earbuds about 3 times
- Input: DC5V
- Working time: 3 hours
- Supporting agreement: HSP/HFP/A2DP/ AVRCP
- Sensitivity: 120±5db
- Frequency response: 20-20000Hz
- Impedance: 32Ω
Product Instruction
TWS realize wireless stereo, separate lefe and right channel;
Both the left and right ears have full Bluetooth fuctionality and can be used individually or in pairs;
1. Pairing
Hold down the power button for 5 seconds until the red and blue lights flashing alternately;
Find the bluetooth name “EB56” on your cellphone bluetooth list and click it to connect. When connected successfully, the LED indicator will turn off;
Earbuds Pairing: remove earbuds from case, double click the right earbud to pair;
Once paired to your phone or device, the earbuds will remain paired to that device for future use;
2. Power Off
Hold down the power button for 5 seconds, red light will flash 3 times and then turn off; You only need to turn off one earbud, the other will turn off automatically;
3. Answer/make a call
The EB56 earbuds support answering and placing phone calls; Reject a call: hold the left or right earbud button for 2 or more seconds; Call the last number answered/called: press the left or right earbud three time in a row;
4. Listening to music
Pause/play: click either the left or right earbud one time;
Previous song: press the left earbud for 3 seconds;
Skip song: press the right earbuds for 3 seconds;
Call Siri: double click left or right side of earbuds;
5. Indicator light
The indicator light will be a bright red color when charging. When the unit is fully charged, the indicator light will illuminate blue, and will turn off after about 5 minutes;
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction