EXTREMECONTROLLER Vehicle Signal Input Control Connectors Instructions
- June 17, 2024
- EXTREMECONTROLLER
Table of Contents
EXTREMECONTROLLER Vehicle Signal Input Control Connectors
Product Information
Specifications:
- Product Name: ExtremeController
- Function: Street Mode for Zone 3 and 4
- Compatibility: Vehicle Signal Inputs
Product Usage Instructions
Installation and Wiring:
- Optional Step: Integrate with the Vehicle Signal Inputs.
- Identify the turn, brake, and reverse wires on your vehicle.
- Connect the Vehicle Signal Input Control Connectors to the corresponding vehicle signal wires. (Connection cables not included)
- This will enable the Street Mode function for Zone 3 and 4 on the ExtremeController.
Recommendation:
- If unsure about the vehicle’s signal wire locations, refer to the vehicle’s manual or consult a technician.
- Incorrect connections may lead to controller or vehicle malfunction.
Testing:
- Complete all wiring connections.
- Turn on the ExtremeController for the first time.
- Test for proper wiring and function by checking if Street Mode functions correctly in Zone 3 and 4.
FAQ
Q: What should I do if I encounter issues with the Street Mode function
after wiring?
A: Double-check the wiring connections if you experience problems with Street
Mode function. Ensure correct attachment to the vehicle signal wires.
Installation and Wiring
Optional: Integrate with the Vehicle Signal Inputs
If you are familiar with all of your vehicle’s signal input connections, you
can connect the Vehicle Signal Input Control Connectors to your vehicle’s
turn, brake, and reverse wires (connection cables between the
ExtremeController and your vehicle signal are not included) to add the Street
Mode function to Zone 3 and 4.
- Pink Wire: Reverse Signal
- Orange Wire: Brake Signal
- Green Wire: Left Turn Signal
- Blue Wire: Right Turn Signal
Recommendation : If you are not sure where these signal wires are located
on your vehicle, consult your vehicle’s manual or a technician. Incorrect
connections to your vehicle may cause your controller or your vehicle to
malfunction.
IMPORTANT : After you complete all the wiring and turn on the
ExtremeController for the first time, test for proper wiring and function as
follows:
- Turn the vehicle’s left turn signal on: LEDs connected to Zone 3 will flash Yellow.
- Turn the vehicle’s right turn signal on: LEDs connected to Zone 4 will flash Yellow.
- Press the vehicle’s brake: LEDs connected to Zone 3 and 4 will shine Red.
- Carefully put your vehicle in reverse: LEDs connected to Zone 3 and 4 will shine White.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>