naturaled LED-FXFDL10 LED Flood Light Installation Guide
- June 4, 2024
- naturaled
Table of Contents
LED Flood Light
Installation Guide
v1.0
WARNING
To reduce the risk of electrical shock, fire, or injury to persons; read
and follow all warnings and installation instructions before installing. All
installation should be performed by a qualified electrician.
Risk of Electric Shock
Ensure power is off before installation or inspection. All wirings are
performed in accordance with Electrical Code and local electrical code.
Risk of Fire
Fixtures are rated for use in 120-277V, 50-60Hz protected circuits and 90°C
rated supply wire.
FOR YOUR SAFETY
While performing the installations described, gloves, safety glasses or
goggles should be worn.
Any alteration or modification of this product is expressly forbidden as it
may cause serious personal injury, death, property damage, and/or product
malfunction.
To prevent product malfunction and/or electrical shock, this product must be
properly grounded
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet
metal or other sharp objects.
Do not alter, relocate, or remove the wiring, lamp holders, power supply, or
any other electrical component.
SUITABLE FOR WET LOCATIONS.
INSIDE THE BOX
INSTALLATION
Disconnect the power before installation. Exploded view of the completed
assembly with component call out. 1, 2, 3, etc.
1/2 inch Knuckle mount
Dimensions
Plusrite USA
2000 S. Grove Ave, Bldg B
Ontario CA 91761
T:909-930-6868
T:888-758-7443
F:909-930-9988
www.naturaled.com
Documents / Resources
|
naturaled LED-FXFDL10 LED Flood
Light
[pdf] Installation Guide
LED-FXFDL10, LED Flood Light, LED-FXFDL10 LED Flood Light, Flood Light, Light
---|---