naturaled LED-FX5DWS25 Energy Star Rated 25 Watt LED Wall Sconce Light Installation Guide
- June 6, 2024
- naturaled
Table of Contents
Installation Guide
v1.0 1-2
LED Wall Sconce
WARNING
To reduce the risk of electrical shock, fire, or injury to persons; read and
follow all warnings and installation instructions before installing. All
installation should be performed by a qualified electrician.
Risk of Electric Shock
Prior to inspection and installation turn the power off via the circuit
breaker panel. Only to be performed by certified personnel conformed to local
electrical and codes.
Risk of Fire
This fixture is rated for 100-277VAC at 60Hz only installation must be
performed to the following instructions contained in this manual.
FAVOR SAFETY
While performing installations described, gloves, safety glasses or goggles
should be worn.
Do not make or alter any open holes in an enclosure of wiring or electrical
components during installation. To prevent wiring damage or abrasion, do not
expose wiring to edges of sheet metal or other sharp objects.
Do not alter, relocate, or remove the wiring, lamp holders, power supply, or
any other electrical component.
SUITABLE FOR WET LOCATIONS.
INSTALLATION
Exploded view of the completed assembly with component call out. 1, 2, 3, etc.
- Pull the power supply wires out from the outlet box, mount the bracket to the outlet box with the bracket screws.
- Connect the wires.
- Screw fixture on a bracket with screw and gasket
- Seal around the junction box with silicone sealant.
- Pull the power supply wires out from the outlet box, mount the bracket to the outlet box with the bracket screws.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>