METROPOLITAN N7352-790 Prima Vista 2-Light Aged Antique Brass Wall Sconce with Clear Acrylic Accents Instruction Manual

METROPOLITAN N7352-790 Prima Vista 2-Light Aged Antique Brass Wall Sconce

with Clear Acrylic Accents

Product Information

The product is a light fixture with the item number N7352-790. It comes with a crossbar, ground screw, mounting screws, back plate, finial, candelabra base bulbs, and acrylic poles GP7352-1, GP7352-2, and GP7352-3. The fixture is designed to be connected to a junction box and is compatible with up to 60-watt candelabra base bulbs or CFL/LED equivalents. The fixture’s maximum wattage rating should not be exceeded.

Product Usage Instructions

1. Shut off power at the fuse box or circuit breaker box and remove the old fixture including the mounting hardware.
2. Unpack the new fixture and lay out all the parts in a clean area. Take care not to misplace any small parts necessary for installation.
3. Secure crossbar (A) to the junction box with mounting screws (B) (Size: #8-32N*L1). The side of the crossbar marked GND must face out.
4. Thread one end of all thread (C) into crossbar (A), and tighten with a lock washer and hex nut. The length of all threads (C) may be adjusted if necessary.
5. Connect the electrical wires as shown in Fig. 2, making sure that all wire connectors are secured. If your junction box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the crossbar (A) using the green screw provided. Tuck wire connections neatly into the junction box.
6. Place back plate (G) of fixture body (F) to all thread (C) and secure with a finial (D).
7. Install (2) two candelabra base bulbs (E) up to 60 watts each or CFL or LED equivalent (not included) in accordance with the fixture specification. Do not exceed the maximum wattage rating.
8. Turn on the power at the junction box and test the fixture.

Note : The illustration in Fig. 1 is for installation purposes only and may or may not be identical to the fixture purchased.

Item# N7352-790 (New. 10/13/2021)
READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT THE POWER OFF AT THE FUSE OR CIRCUIT BREAKER.

INSTALLATION INSTRUCTIONS

PREPARATION

1. Shut off power at the fuse box or circuit breaker box and remove the old fixture including the mounting hardware.

2. Carefully unpack your new fixture and lay out all the parts in a clean area. Take care not to misplace any small parts necessary for installation.
   ASSEMBLING THE FIXTURE (Fig. 1)

3. Secure crossbar (A) to junction box (Not included) with mounting screws (B) (Size: #8-32N*L1”). The side of the crossbar marked “GND” must face out.

4. Thread one end of all thread (C) into crossbar (A), and tighten with a lock washer and hex nut. The length of all threads (C) may be adjusted if necessary.
   CONNECTING THE WIRES (Fig. 2)

5. Connect the electrical wires as shown in Fig. 2, making sure that all wire connectors are secured. If your junction box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the Crossbar (A) using the green screw provided.

6. Tuck wire connections neatly into the junction box.
   COMPLETING THE INSTALLATION (Fig. 1)

7. Place back plate (G) of fixture body (F) to all thread (C) and secure with a finial (D).

8. Install (2) two candelabra base bulbs (E) up to 60 watts each or CFL or LED equivalent (not included) in accordance with the fixture specification.

DO NOT EXCEED THE MAXIMUM WATTAGE RATING!
Your installation is now complete. Return power to the junction box and test the fixture.

Note : The illustration (Fig. 1) in this manual is for installation purposes only. It may or may not be identical to the fixture purchased.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>