naturaled LED Decorative Up/Down Wall Sconce Installation Guide

June 6, 2024
naturaled

logo

naturaled LED Decorative Up/Down Wall Sconce

natureled

LED Decorative Up/Down Wall Sconce

WARNING

To reduce the risk of electrical shock, fire, or injury to persons; read and follow all warnings and installation instructions before installing. All installation should be performed by a qualified electrician.
Risk of Electric Shock
Prior to inspection and installation turn power off via circuit breaker panel. Only to be performed by certified personnel conformed to local electrical and codes.
Risk of Fire
This fixture is rated for 100-277 VAC at 60Hz only installation must be performed to the following instructions containing in this manual.

FOR YOUR SAFETY
While performing installations described, gloves, safety glasses or goggles should be worn.

Do not make or alter any open holes in an enclosure of wiring or electrical components during installation.
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
Do not alter, relocate, or remove wiring, lampholders, power supply, or any other electrical component.
SUITABLE FOR WET LOCATIONS.

INSIDE THE BOX

LED Decorative UpDown Wall Sconce fig 1

INSTALLATION

Step 1: Take out led lamp and make sure it is intact.

LED Decorative UpDown Wall Sconce fig 2

Step 2: Attach the Base Plate to the junction box with the screws.

Step 3: Connect the LED fixture to 120-277 VAC 60Hz in accordance to local codes, support fixture while making connections.

Step 4 : Align mounting holes of lamp body to base plate and secure with provided fasteners.

LED Decorative UpDown Wall Sconce fig 5

IMPORTANT: Apply a weatherproof silicone caulk or sealant around the fixture base (on top, left, and right) and leave a small opening at the bottom as drainage for any moisture accumulation inside the fixture.

For Wet and Damp Locations
Luminaires installed in wet or damp locations shall be installed such that water cannot enter or accumulate in wiring compartments, lamp holders, or other electrical parts. All luminaries installed in wet locations shall be marked, “suitable for wet locations”. All luminaires installed in damp locations shall be marked.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals