DiFluid DFT-F10V55H23 Device User Guide

June 5, 2024
DiFluid

DiFluid DFT F10V55H23 Device**Quick Startup Guide
**

Content

OverviewDiFluid DFT F10V55H23 Device - overview

AccessoriesDiFluid DFT F10V55H23 Device -
assesrois

Operation Guide

Calibration

DiFluid DFT F10V55H23 Device - operation1| DiFluid DFT F10V55H23 Device - operation2
---|---

Cleaning
For better measurement result clean thoroughly after each measurementDiFluid DFT F10V55H23 Device - operation6

Measurement

DiFluid DFT F10V55H23 Device - msm1|
---|---

FCC regulatory conformance

This device camp with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Note

  • The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
  • Measurement should be conducted with liquid between 5°C-45°C. Out of this temperature range may cause an error in the result.

RF Exposure

  • This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
  • This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals