MEGAIN CP10 Wireless Smart Meat Thermometer User Manual
- June 14, 2024
- MEGAIN
Table of Contents
Wireless smart meat thermometer
Product Instructions
CP10 Wireless Smart Meat Thermometer
| |
---|---|---
Probe| Relay| BBQ App
Product specifications
Bluetooth version：5.2
App name：BBQ
Wireless distance：MAX 500 feet
Probe standby time: 72hours
Relay standby time：600hours
power consumption:350uA(Relay)/ 40uA(probe)
Operating Voltage：3v(relay)
Internal temperature: -20~100℃/-4~212℉
Ambient temperature： 0~300℃/32~572℉
Probe charging time：2 hours
Relay/Repeater Charging Time: 2-3 hours
Water proof ：IP67(probe)
Size:L 180 x W 50 x H 50mm(Relay)
L130 x Φ6 x Φ12mm（Probe）
Operating Voltage:2.4v(probe)
Key setting
Operating instructions:
- Before use, please charge the Relay for 2-3 hours to ensure that the probe is inside the Relay charging compartment.
- Please charge the probe for 30 minutes before each use to ensure it can stand by for 24 hours.
- The indicator light is red when the Relay is charging, and blue when full charged.
- Turn on the Relay power and press the probe power detection button, When the probe power indicator light is green, it indicates that the probe charging is complete. When the battery indicator light of the probe is red, it indicate that the probe has not completed charging.
Connect to the app for use.
Download the phone App and connected it to the Relay, the settings and display
of the app and Relay device will be synectilized.Put the Relay device next to
cooker, this will allow you to monitor the cooking process on your phone from
a maximum distance of 500 feet away.
Download the app:http://test.megain-iot.cn/BbqProbe
Device connections application operation guide：
BBQ application operation guide：
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection againstharmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, maycause harmful interference to radio communications. However,
there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>