Holiday LIVING L20T6-70LD3K3 7 Ft LED Pre-Lit Flocked Pencil Tree Instruction Manual
- June 3, 2024
- Holiday LIVING
Table of Contents
Holiday LIVING L20T6-70LD3K3 7 Ft LED Pre-Lit Flocked Pencil Tree
Thank you for purchasing this Holiday Living product. We’ve created these
easy-to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item number and refer to the
Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
888-251-1006, 8 a.m. – 8 p.m.,
EST,Monday – Sunday. You could also contact us at
partsplus@lowes.com.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
CAUTION
- Product is intended for indoor use only. To reduce the risk of fire, do not deliberately reposition either bulb or lampholder contact.
- This is an electrical product not a toy! To avoid the risk of fire, burns, personal injury, and electric shock it should not be played with or placed where small children can reach it.
- Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
- This seasonal use product is not intended for permanent installation or use.
- Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
- Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
- Do not let lamps rest on the supply cord or on any wire.
- Unplug the product when leaving the house, when retiring for the night, or if left unattended
- Do not use this product for other than its intended use
- Do not hang ornaments or other objects from cord, wire, or light string.
- Do not close doors or windows on the product or extension cord as this may damage the wire insulation.
- Do not cover the product with a cloth, paper or any material not part of the product when in use.
- Do not connect the light set to any other purpose than its intended use
- The external flexible cable or cord cannot be replaced. If the cord is damaged: DO NOT USE THIS LIGHT CHAIN. THROW LIGHT CHAIN AWAY.
- • This product is equipped with non-replaceable type lamps. Do not try to replace lamps.
PREPARATION
Before beginning installation of product, make sure all parts are present.
Compare parts with package contents list.
If any part is missing or damaged, do not attempt to assemble, install or
operate the product.
Estimated Assembly Time: 5 minutes.
PACKAGE CONTENTS
INSTALLATION OVERVIEW
-
Pull to spread the legs of the tree stand (D) so it is X-shaped.
-
Remove the protective cap from the tree bottom (C). Insert the tree bottom (C) into the tree stand (D), screw the eye bolts (E) through the holes in the tree stand (D) so they touch the trunk of the tree bottom (C). Adjust the tree bottom (C) by screwing the eye bolts (E) in or out.
-
To allow the branches to unfold into place. Shape the branches of tree bottom (C).
-
Remove the protective cap from the tree middle (B). Insert the tree middle (B) into the tree bottom (C). Connect the plug on the light set of the tree middle (B) into the end plug from tree bottom (C). To allow the branches to unfold into place. Shape the branches of the tree middle (B).
-
Insert the tree top (A) into the tree middle (B). Connect the plug on the light set of the tree top (A) into the end plug from tree middle (B). Pull down the branches from the tree top (A). Shape the branches of tree top (A).
-
Plug the cord (F) into the power supply, all sections of the tree should be lit now. When the light sets are on press the button from the foot switch to change illumination setting:
-
Steady warm white
-
Steady multi
-
Fading between warm white and multi
-
Fading warm white
-
Fading multi
-
Flashing warm white
-
Flashing multi
-
Flashing between warm white and multi
-
Changing between warm white and multi
-
Off
TROUBLESHOOTING
PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
---|---|---|
Whole tree doesn’t light. L’arbre ne s’allume pas. | 1. Loose connection |
between adapter and wall outlet.
2. Loose connection between tree light set and adapter.
| 1. Check and reconnect adpater to wall outlet.
2. Check and reconnect tree light set and adpater.
A section doesn’t light.| Loose connection between this section and lower section.| Check and reconnect the section and its lower section.
CARE AND MAINTENANCE
Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire insulation or cord, cracks in the lamp holders or enclosures, loose connections, or exposed copper wire.
Printed in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>