HOLIDAY LIVING SG24139 26 In Pre Lit Decor Wreath Instructions
- July 14, 2024
- Holiday LIVING
Table of Contents
HOLIDAY LIVING SG24139 26 In Pre Lit Decor Wreath
Product Information
Specifications
- Brand: HOLIDAY LIVING
- Model: SG24139
- Size: 66.04 cm
Product Usage Instructions
Assembly
Thank you for purchasing this HOLIDAY LIVING product. Follow these steps
for assembly:
- Hang up the wreath.
- Insert the plug (D) into the power supply.
- The wreath should be lit now.
Care and Maintenance
- Please read and understand the manual before assembly, operation, or installation.
Bulb Replacement Instructions:
Refer to the included manual for bulb replacement instructions.
Fuse Replacement Instructions
Access the fuse near the plug for replacement. Follow the steps for fuse
replacement.
FAQ
Problem: Whole wreath doesn’t light.
- Possible Cause: Loose connection between plug and wall outlet.
- Solution: Check and reconnect plug to wall outlet.
Problem: Lights do not work.
Possible Causes
- Loose bulb.
- Fuse failed.
Solutions
- Replace bulb.
- Gently push each bulb inward.
- Replace fuse.
HOLIDAY LIVING and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
ITEM #5761530
MODE #LW24W06-26LW
Questions, problems or missing parts?
Before returning, contact us on:
888-251-1006, 8 a.m. – 8 p.m., EST,
Monday – Sunday or ascs@lowes.com.
Thank you for purchasing this HOLIDAY LIVING product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Whole wreath doesn’t light. | Loose connection between plug and wall outlet. |
Check and reconnect plug to wall outlet.
Lights do not work.|
- Burned out or broken bulbs.
- Loose bulb.
- Fuse failed.
|
- Replace bulb.
- Gently push each bulb inward.
- Replace fuse.
CARE AND MAINTENANCE
- Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire insulation or cord, cracks in the lamp holders or enclosures, loose connections, or exposed copper wire.
- When not in use, store neatly in a cool, dry location protected from sunlight.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
- Estimated Assembly Time: 5 minutes.
- Tiempo estimado de ensamblaje: 5 minutos.
SAFETY INFORMATION
BULB REPLACEMENT INSTRUCTIONS:/INSTRUCCIONES PARA EL REEMPLAZO DE BOMBILLAS:
- Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
- Pull lamp and plastic base straight out of lamp holder.
- Replace lamp with only 3.6 Volt, 0.072 Watt push-in type lamp provided with product.
Grip plastic not glass. Do not twist lamp. Pull straight out. Push straight in.
FUSE REPLACEMENT INSTRUCTIONS
- Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
- Open fuse cover by sliding open the fuse access cover on top of attachment plug toward blades.
- Turn fuse holder over and remove fuse carefully.
- Risk of fire. Replace fuse only with 3 amp, 125 Volt fuse for extension cord.
- Close fuse cover by sliding closed the fuse access cover on top of attachment plug.
Please read and understand this entire manual before attempting to assemble, operate or install the product. Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto.
CAUTION
- The product is for indoor and outdoor use. To reduce the risk of fire, do not deliberately reposition either bulb or lampholder contact.
- To reduce the risk of overheating, replace burned out lamps promptly. This is an electrical product not a toy! To avoid the risk of fire, burns, personal injury, and electric shock it should not be played with or placed where small children can reach it.
- Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault
- Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
- This seasonal use product isnot intended for permanent installation or use.
- Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
- Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
- Do not let lamps rest on the supply cord or on any wire.
- Unplug the product when leaving the house, when retiring for the night, or if left unattended.
- Do not use this product for other than its intended use.
- Do not hang ornaments or other objects from cord, wire, or light string.
- Do not close doors or windows on the product or extension cord as this may damage the wire insulation.
- Do not cover the product with a cloth, paper or any material not part of the product when in use.
- The external flexible cable or cord cannot be replaced. If the cord is damaged: DO NOT USE THIS LIGHT CHAIN. THROW LIGHT CHAIN AWAY!/
- Do not connect the light set to any other purpose than its intended use.
PACKAGE CONTENTS
INSTALLATION OVERVIEW
Shape the tips on the wreath (A).
Hang up the wreath. Insert the plug (D) into the power supply. The wreath should be lit now.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>