RICCAR R50SS Vacuum Cleaner Instruction Manual
- June 5, 2024
- RICCAR
Table of Contents
RICCAR PARTS BOOK
PRIMA MODEL ALL VERSIONS
PRIMA.2 PRIMAP.2 PRIMA.4SS PRIMA.CPN
PRIMAL.FSN PRIMAP.TAD PRIMAL.TAP
R50SS, R50FSN, R50TA
Rev 18 05/02/2022
UPPER BODY
Riccar Model PRIMA All Versions
| KEY | PART NUMBER | DESCRIPTION |
|---|---|---|
| 1 | B338-24SV | FBI Bezel |
| 2 | B338-8300 | Lid Hinge E-Clip |
3
| B338-03PB| Light Blue Bag Door Lid (PRIMA.2, PRIMA.4SS)
B338-03MB| Dark Blue Bag Door Lid (PRIMAP.2, PRIMAP.CPN, PRIMAP. FSN)
B338-9600| Matte Black Bag Door Lid (PRIMAP.TAD, PRIMAP.TAP, R50SS, R50FSN,
R50TAP)
4| B338-10SV| Bag Lid Latch
5| B338-2914| Lid Hinge Cover
6| B338-4600| Lid Hinge Pin
7| B338-3000| Hinge Seal Grommet
8| C338-0300| FBI Assembly
9| B338-2600| Main Inlet Seal
10| B338-1614| Main Suction Inlet (Straight Suction version)
B338-9100| Main Suction Inlet (Powered version)
11| Not Available| Wiring Harness (Powered versions only)
12| Not Available| Lid Wiring Cover Small
13| Not Available| Lid Wiring Cover Large
14| B338-3200| Variable Speed Slide
15| B338-8100| Variable Slide Bushing
16| B338-14SV| Variable Speed Slide Cover
17| B338-1314| On/Off Foot Pedal
18| Not Available| Control Panel Bezel
19| B338-6600| Spring On/Off Foot Pedal
20| Not Available| Back Docking
21| Not Available| Cord Reel Plug Pocket
22| B338-1214| Cord Strain Relief
23
| B338-02PB| Light Blue Top Housing (PRIMA.2, PRIMA.4SS)
Not Available| Dark Blue Top Housing (PRIMAP.2, PRIMAP.CPN, PRIMAP. FSN)
Not Available| Matte Black Top Housing (PRIMAP.TAD, PRIMA.TAP, R50SS, R50FSN,
R50TAP)
24| B338-2500| Lid Latch Flat Spring
25| B338-52B4| HEPA Filter Bulk
RF19| HEPA Filter Set (Includes Secondary Foam Filter)
| RF19G| HEPA and Granulated Charcoal Secondary Filter Set
26| Not Available| Wire Strain Relief
LOWER BODY
| KEY | PART NUMBER | DESCRIPTION |
|---|---|---|
| 1 | B338-23B4 | Bag Compartment Filter Frame |
2
| B338-8000| Foam Secondary Filter Bulk
Not Available| Granulated Charcoal Secondary Filter Bulk
RF19| HEPA and Foam Secondary Filter Set
RF19G| HEPA and Granulated Charcoal Secondary Filter Set
3| RCH-6| HEPA Bag (6 Pack)
RCHC-6| Charcoal/HEPA Bag (6 Pack)
4| B338-1700| Bag Compartment Seal
5| B338-4700| HEPA Filter Seal
6| B338-3300| Main PCB w/Variable Speed Control (Straight Suction)
B338-9000| Main PCB w/Variable Speed Control (Powered version)
7| B338-6500| Spring Bag Holder
8| B338-50B4| Bag Holder
9| B338-0414| Bag Compartment Insert/Motor Cover
10| B338-0600| Cord Reel
11| C338-0200| Wheel Assembly (Includes bearing, axle, e-clip)
12| B338-4800| Cord Reel Cooling Tube
13| B338-0914| Back Docking
14| C338-0614| Front Caster Assembly
15| B338-0714| Handle Grip
16| B338-0114| Bottom Housing
17| B338-4400| Motor Compartment Seal
18| B338-4500| Motor Compartment Sound Dampener
19| Not Available| Bumper
20| B338-5100| Motor Compartment Wire Grommet
21| B338-3100| On/Off Switch
MOTOR ASSEMBLY
| KEY | PART NUMBER | DESCRIPTION |
|---|---|---|
| 1 | C338-0500 | Motor Assembly |
| 2 | B338-4100 | Motor Cocoon Back Vibration Rubber |
| 3 | Not Available | Motor Back Square Rubber Mount |
| 4 | B338-3700 | Motor Rear Cocoon |
| 5 | Not Available | Motor Sound Reduction Foam |
| 6 | Not Available | Motor |
| 7 | Not Available | Motor Cocoon Internal Foam Seal |
| 8 | Not Available | Motor Cocoon Vibration Isolation Pad |
| 9 | B338-3600 | Motor Front Cocoon |
| 10 | Not Available | Motor Cocoon Front Face Seal |
TOOLS AND ACCESSORIES
| KEY | PART NUMBER | DESCRIPTION |
|---|---|---|
| 1 | C338-0700 | Straight Suction Hose Assembly |
| D338-0600 | Powered Hose Assembly | |
| 2 | C338-1100 | Straight Suction Wand Assembly |
| C338-1000 | Powered Wand Assembly | |
| 3 | B338-8800 | Replaceable Wand Tip |
| 4 | B226-1149 | Tool Adapter |
| 5 | B338-6900 | Tool Caddy |
| 6 | B338-7614 | 2 in 1 Tool |
| 7 | B338-5414 | Crevice Tool |
| 8 | B338-7800B | Microfiber Bare Floor Tool |
| MFP-3 | Floor Tool Microfiber Pad (Package of 3) | |
| 9 | RPET-TOOL | Fur Get It Pet Tool (PRIMA.TAD, PRIMA.TAP, R50TAP) |
| 10 | TB2-RP | Hand Held Turbo Brush (PRIMA.TAP, R50TAP) |
11
| B338-7900| Rug Floor Combo Tool (PRIMAP.TAP, R50TAP Only )
B226-1000| Snap on Base
BFP-3| Rug/Floor Combo Tool Blue Mopping Pads (Package of 3)
WFP-3| Rug/Floor Combo Tool White Polishing Pads (Package of 3)
12| KIT-BAG| Tool Bag (PRIMA.TAD, PRIMA.TAP, R50TAP)
13| D220-1414| Soft Carpet Baseplate (PRIMA.TAD, PRIMA. TAP, R50TAP)
14
|
CTB4
| Floor Turbo Brush Slide Knob Unbranded Bulk (PRIMA.2SS, PRIMA.4SS, PRIMA.6SS, R50SS.2)
COMPACT POWER NOZZLE
Riccar Model PRIMAP.CPN
| KEY | PART NUMBER | DESCRIPTION |
|---|---|---|
| 1 | B354-4900 | LED Board |
| 2 | B354-0300 | LED Reflector |
| 3 | B354-0400 | Circuit Breaker |
| 4 | B354-0500 | Motor Lead Cover |
| 5 | B351-7700 | Cord Assembly |
| 6 | D354-1500 | PC Board Assembly |
| 7 | B354-0600 | Balance Weight |
| 8 | D354-0300 | Bottom Housing Assembly |
| 9 | D354-0400 | Small Wheel Assembly |
| 10 | D354-0800 | Nozzle Cover w/Lens |
| 11 | B354-2300B | Basetray Cover |
| 12 | D354-0700 | Baseplate Assembly |
| 13 | B354-0700 | Baseplate Locking Screws |
| 14 | B354-0800 | Baseplate Seal |
| 15 | B354-0900 | Squeegee |
| 16 | C354-1300 | Agitator Assembly |
| 17 | D338-0300 | Neck Assembly |
| 18 | B351-7914 | Retainer Nozzle Plug |
| 19 | B351-8300 | Spring for Button |
| 20 | B351-8124 | Button for Wand |
| 21 | B351-8214 | Button Cover for Wand |
| 22 | D354-1100 | Motor Assembly |
| 23 | D354-1200 | Neck Lock Assembly |
| 24 | B354-1300 | Motor Gasket |
| 25 | B354-5200 | Belt |
| 26 | B354-1200 | Lens Cover |
| 27 | RCPN | Compact Power Nozzle Assembly |
Full Size Power Nozzle
Nozzle RICCAR Model PRIMAP.FSN, R50FSN
| KEY | PART NUMBER | DESCRIPTION |
|---|---|---|
| 1 | D350-1200 | Top Housing Assembly |
| 2 | 8350-1515 | Headlight Lens |
| 3 | 1)338-0200 | Neck Assembly |
| 4 | 8350-4714C | Teflon Seal |
| 5 | 13351-7600 | Pigtail Plug |
| 6 | 8351-7914 | Plug Retainer |
| 7 | 13350-7700 | Wand Release Axle |
| 8 | 8350-760013 | Wand Release Spring |
| 9 | 8351-7314 | Wand Release Upper Pedal |
| 10 | 13351-7414 | Wand Release Lower Pedal |
| 11 | 1)350-5100 | Hidden Raceway Assembly |
| 12 | C350-5900 | Pedal |
| 13 | 13350-2601 | lilt Lock Lever |
| 14 | 13350-2801 | Tilt Lock Pin |
| 15 | A732-8414 | Screws Hi/Lo #8 |
| 16 | 1)350-9900 | Bottom Housing Assembly |
| 17 | 8350-3400 | Tilt Lock Link |
| 18 | 8350-3500 | Tilt Lock Torsion Spring |
| 19 | 8350-2214B | Bottom Housing |
| 20 | 8350-8701B | Felt Seal for Bottom Housing |
| 21 | 13350-8414 | Belt Housing |
| 22 | C350-6731B | Rear Wheel Assembly |
| 23 | 13010-0210C | Back Wheel Pin 5mm x 38mm |
| 24 | 1)350-1100 | 2.5A Switch |
| 25 | C350-9700 | Height Adjust Assembly |
| 26 | C350-4300 | LED Assembly |
| 35 | C351-5700 | Axle Stamping Assembly |
| 36 | C350-9800 | Height Adjust Bar Assembly |
| 37 | 8350-40008 | External Retaining Ring 5/16″ |
| 38 | 8350-3942 | Axle Height Wheel |
| 39 | Not Available | Height Adjust Bar |
| 40 | C351-5800 | Bottom Plate w/seals Assembly |
| 41 | A430-0205 | Screw #8 16 x2 .5 |
| 42 | D351-2100 | Steel Agitator Assembly |
| 43 | B351-4400 | End Cap Cover |
| 44 | A113-2200 | Motor |
| 45 | B350-2514 | Poly V Belt |
| 46 | A350-0000 | Light Bulb I2v |
| 47 | B350-6197B | Reflector |
| 48 | A350-0100E1 | Snap In Light Socket |
| 49 | B 123-2700 | Wire Connectors Lg |
| 50 | B350-8601E1 | Felt Seal for Belt Housing |
| 51 | B350-1815 | Height Adjust/LED Lens |
| 52 | D350-33I4 | Belt Housing With Seals |
| 53 | RFSN | Full Size Power Nozzle |
**Full-Size Nozzle Agitator
**
RICCAR Model PRIMAP.FSN, R50FSN
| KEY | PART NUMBER | DESCRIPTION |
|---|---|---|
| 1 | A375-0100 | Locking Hex Nut |
| 2 | A375-0200 | Bearing |
| 3 | A733-1810 | Clamped Agitator Screw 80mm |
| 4 | A733-1800 | Clamped Agitator Screw 40mm |
| 5 | Not Available | Agitator Shaft |
6
| B351-2000| Nylon Brush Strip Short (Standard)
Not Available| White Brush Strip Short
B351-1800| Natural Brush Strip Short
7
| B351-2100| Nylon Brush Strip Long (Standard)
Not Available| White Brush Strip Long
Not Available| White Brush Strip 4 pk (Includes long and short)
B351-1900| Natural Brush Strip Long
Not Available| Natural Brush Strip 4 pk (Includes long and short)
8| Not Available| Pulley
9| B351-4400| End Cap Cover
10| B375-3900| Felt Seal
11| B375-3600| Metal End Cap
12| B475-1800| Bearing Cartridge
13| B475-1900| Retainer Ring
14| Not Available| Agitator Core
15| D351-2100| Power Nozzle Agitator Assembly
**TANDEM AIR POWER NOZZLE
**
R ICCAR Model PRIMAP.TAD/TAP, R50TAP
| KEY | PART NUMBER | DESCRIPTION |
|---|---|---|
| I | D220-2450 | Nozzle Cover (RTAPN.D) |
| D220-2470 | Nozzle Cover (RTAPN.P) | |
| 2 | 8220-7814 | Park |
| 3 | 8018-0415 | Lens |
| 4 | B220-26I4 | Furniture Guard |
| 5 | B35I-8214 | Neck Button Cover |
| 6 | B351-8124 | Neck Button |
| 7 | 8351-8300 | Spring |
| 8 | 8220-7914 | Neck |
| 9 | B354-2800 | Neck Lock Ring |
| 10 | B351-8400 | Pigtail Cord |
| 11 | B351-7914 | Pigtail Plug Retainer |
| 12 | A732-3000 | E Clip (RTAPN.D) |
| 13 | 13223-2814C | Motor Support Boss |
| 14 | See #27 | Flat Belt Motor |
| See #27 | V Belt Motor | |
| 15 | 13223-0114 | Motor Housing |
| 16 | A733-5000 | Screw M5 X 6mm Socket |
| 17 | 8220-4414 | Pivot Bushing |
| 18 | B220-4500 | Felt Pivot Seal |
| 19 | See N58 | Scroll Housing Right See #58 For Replacment |
| 20 | A733-3300 | Washer (Behind Fan) |
| 21 | 8220-4314 | Motor Fan |
| 22 | A733-2200 | Washer |
| 23 | A432-0605 | Hex Nut |
| 24 | 13220-4114 | Scroll Housing Left |
| 25 | A732-8314 | Pan Head Screw #8 X 5/8 |
| 26 | 8480-4514 | Motor Inlet Seal |
| 27 | D223-19I4 | Flat Belt Motor Assembly (RTAPN.D) |
| D223-2500 | V Belt Belt Motor Assembly (RTAPN.P) | |
| 28 | A732-2500 | Screw M4x12 |
| 29 | B034-0100 | Strain Relief Washer |
| 30 | B220-0214 | Inlet Duct Cover |
| 31 | A350-0500 | 2 Amp Circuit Breaker (RTAPN.D) |
| 32 | 8223-1700 | Circuit Breaker Harness (RTAPN.D) |
| 33 | A732-84I4 | Screw Hi Lo N8 x 7/16″ |
| 34 | 0475-0310 | Hall Sensor Assembly (RTAPN.P) |
| 8317-1400K | LED Board (RTAPN.D) | |
| 35 | 8317-1600K | LED Board (RTAPN.P) |
| 36 | D220-0114 | Basetray Assembly |
| 37 | 8016-1914 | Basetray Plug (RTAPN.D) |
| 38 | B220-01 I4D | Basetray |
| 39 | 54. | Rear Axle Clamp |
| 40 | 8220-0900 | Upright Stop Spring |
| 41 | 0220-0714 | Pedal Assembly |
| 42 | 8220-0714 | Upright Stop Pedal |
| 43 | 8220-0800 | Upright Stop Pedal Pivet |
| 44 | D220-0631 | Rear Wheel with Axle |
| 45 | 13010-2800C | Large Wheel Axle |
| 46 | C220-0531C | Rear Wheel |
| 47 | B010-0001E | Small Wheel Axle |
| 48 | C010-2714B | Small Wheel |
| 49 | D010-2631 | Front Wheel Assembly Includes 847 & #48 |
| 50 | 8014-0814B | Flat Belt Single (RTAPN.D) |
| 13014-1200 | Lifetime Belt (RTAPN.P) | |
| 51 | D012-2300 | Flat Belt Agitator Assembly (RTAPN.D) |
| 0013-0400 | V Belt Agitator Assembly (RTAPN.P) | |
| 52 | 0220-0414 | Baseplate Assembly |
| 53 | 13370-1843 | Front Wheel Assembly with Bushing |
| 54 | 13370-1700 | Bottom Plate Axle |
| 55 | 8220-0414 | Baseplate Cover Screw |
| 56 | 8015-3000B | Squeegee |
| 57 | 8220-0314 | Baseplate |
| 58 | RTAPN.D | Delux Tandem Air Power Nozzle (Flat Belt) |
| RTAPN.P | PremiumTandem Air Nozzle (w/ Belt Protection) | |
| 59 | 0220-7914 | Tandem Air Power Nozzle Neck Assembly Order For Replacement |
010/19
Tandem Air Agitator
RICCAR Model PRIMAP.TAD/TAP, R50TAP
| KEY | PART NUMBER | DESCRIPTION |
|---|---|---|
| 1 | A375-0100 | 1/4-28 Locking Hex Nut |
| 2 | B013-1600 | Metal End Cap |
| 3 | A733-1810 | Agitator Screw 80mm |
| 4 | B475-1900 | Retainer Ring |
| 5 | B375-3900 | Felt Seal |
| 6 | A375-0200 | Bearing |
| 7 | B220-1200 | Pulley for Flat Belt (RTAPN.D) |
| B013-1400 | Pulley for Lifetime Belt (RTAPN.P) | |
| 8 | B013-0301 | White Brush Strip Short |
| 9 | B013-0401B | White Brush Strip Long (Not Currently Available) |
| 10 | B013-1500 | Edge Brush Bearing Holder with Bearing |
| 11 | D012-2300 | Flat Belt Agitator (RTAPN.D) |
| D013-0400 | Lifetime Belt Agitator (RTAPN.P) |