HOLIDAY LIVING LW24G06-6LW 6 Ft Pre Lit Decor Garland Instruction Manual

HOLIDAY LIVING LW24G06-6LW 6 Ft Pre Lit Decor Garland

Product Information
Specifications

• Brand: HOLIDAY LIVING
• Model: SG24156
• Height: 1.82 meters
• Manufacturer: LF, LLC

Care and Maintenance

1. Read and understand the entire manual before assembly or use.
2. Regularly check for loose bulbs and replace if necessary.
3. If lights do not work, follow the bulb and fuse replacement instructions provided.

FAQ
Problem: Whole wreath doesn’t light / Lights do not work.
Possible Causes

• Loose bulb.
• Fuse failed.

Solutions

1. Replace the bulb if loose.
2. Gently push each bulb inward to ensure proper connection.
3. Replace the fuse if necessary.

HOLIDAY LIVING and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
Questions, problems or missing parts?
Before returning, contact us on:
888-251-1006, 8 a.m. – 8 p.m., EST, Monday – Sunday or ascs@lowes.com

Thank you for purchasing this HOLIDAY LIVING product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.

SAFETY INFORMATION

BULB REPLACEMENT INSTRUCTIONS

• Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
• Pull lamp and plastic base straight out of lamp holder.
• Replace lamp with only 3.6 Volt, 0.072 Watt push-in type lamp provided with product.

Grip plastic not glass. Do not twist lamp. Pull straight out. Push straight in.

FUSE REPLACEMENT INSTRUCTIONS

• Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
• Open fuse cover by sliding open the fuse access cover on top of attachment plug toward blades.
• Turn fuse holder over and remove fuse carefully./Dé vuelta el portafusible y retire el fusible con cuidado.
• Risk of fire. Replace fuse only with 3 amp, 125 Volt fuse for extension cord.
• Close fuse cover by sliding closed the fuse access cover on top of attachment plug.

TROUBLESHOOTING

Check and reconnect plug to wall outlet.
Lights do not work.|

1. Burned out or broken bulbs.
2. Loose bulb.
3.  Fuse failed.

|

1. Replace bulb.
2. Gently push each bulb inward.
3. Replace fuse

CARE AND MAINTENANCE

• Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire insulation or cord, cracks in the lamp holders or enclosures, loose connections, or exposed copper wire.
• When not in use, store neatly in a cool, dry location protected from sunlight.

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product. Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto.

CAUTION

• Product is intended for indoor use only. To reduce the risk of fire, do not deliberately reposition either bulb or lampholder contact.  To reduce the risk of overheating, replace burned out lamps promptly.
• This is an electrical product not a toy! To avoid the risk of fire, burns, personal injury, and electric shock it should not be played with or placed where small children can reach it.
• Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
• This seasonal use product isnot intended for permanent installation or use.
• Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
• Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
• Do not let lamps rest on the supply cord or on any wire.
• Unplug the product when leaving the house, when retiring for the night, or if left unattended.
• Do not use this product for other than its intended use.
• Do not hang ornaments or other objects from cord, wire, or light string./
• Do not close doors or windows on the product or extension cord as this may damage the wire insulation.
• Do not cover the product with a cloth, paper or any material not part of the product when in use.
• The external flexible cable or cord cannot be replaced. If the cord is damaged:
• Do not connect the light set to any other purpose than its intended use.
• This product is equipped with non-replaceable type lamps. Do not try to replace lamps.

PACKAGE CONTENT

INSTALLATION OVERVIEW

1. Hang on the Garland (A) and shape the tips.

2. Hang up the garland. Insert the plug (E) into the power supply. The garland should be lit now.

3. Maximum to connect extra 10 pieces of this garland with the following steps:
   Plug the front connector of the second string to the end connector (D) of the first string.
   

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>