HOLIDAY LIVING IM 5761525 9ft Everett Grand Instructions

HOLIDAY LIVING IM 5761525 9ft Everett Grand

Product Specifications

• Brand: HOLIDAY LIVING
• Model: SG24130
• Assembly Time: 15 minutes

Product Usage Instructions
Package Contents

• A x 1 (preassembled)
• B x 1
• C x 1
• D x 1
• E x 1 (preassembled)
• F x 1
• G x 1

Assembly Instructions

1. Spread the legs of the tree stand (E) to form an X-shape.
2. Remove the protective cap from the tree bottom section (D) and insert it into the tree stand (E).
3. Screw the eye bolt (F) through the holes in the tree stand (E) to secure it to the trunk of the tree bottom section (D). Adjust as needed.
4. Shape the branches of the tree bottom (C) to allow them to unfold into place. Side branches should form a Y-shape.
5. Insert the lower tree middle section (C) into the tree bottom section (D), ensuring the jack and socket match to avoid damage.
6. Shape the branches of the lower tree middle section (C) to allow them to unfold into place.

HOLIDAY LIVING and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.

Questions, problems or missing parts?
Before returning, contact us on:
888-251-1006, 8 a.m. – 8 p.m., EST, Monday – Sunday or ascs@lowes.com

Thank you for purchasing this HOLIDAY LIVING product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.

TROUBLESHOOTING

Check and reconnect plug to wall outlet.
A section doesn’t light. .| Loose connection between this section and lower sections.| Check and reconnect the section and its lower section.

CARE AND MAINTENANCE

• Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire insulation or cord, cracks in the lamp holders or enclosures, loose connections, or exposed copper wire.
  When not in use, store neatly in a cool, dry location protected from sunlight.

WARRANTY

•  3-year warranty is applicable to the Artificial Halloween/Christmas Tree against defects in material or workmanship. Lowe’s Companies Inc. will replace defective parts on the product free of charge for a period of 3 years from date of purchase./
• Warranty applies only to the original purchases
• Warranty cannot be transferred to another product or purchaser.
• Replacement as provided by this warranty is the exclusive remedy of the consumer and does not place Lowe’s liable for any incidental or consequential damages.
• This limited warranty does not cover damages resulting from accident, misuse, abuse, negligence or normal wear.
• This limited warranty does not apply to Floor Models or Display Trees.
• Customer is responsible for Shipping & Handling charges.
• Lowe’s reserves the rights to interpret the provisions in this warranty information. The information in this warranty may change without prior notice.

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product. Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto.

CAUTION

• Product is intended for indoor use only. To reduce the risk of fire, do not deliberately reposition either bulb or lampholder contact.  To reduce the risk of overheating, replace burned out lamps promptly.
• This is an electrical product not a toy! To avoid the risk of fire, burns, personal injury, and electric shock it should not be played with or placed where small children can reach it.
• Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
• This seasonal use product isnot intended for permanent installation or use.
• Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
• Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
• Do not let lamps rest on the supply cord or on any wire.
• Unplug the product when leaving the house, when retiring for the night, or if left unattended.
• Do not use this product for other than its intended use.
• Do not hang ornaments or other objects from cord, wire, or light string./
• Do not close doors or windows on the product or extension cord as this may damage the wire insulation.
• Do not cover the product with a cloth, paper or any material not part of the product when in use.
• The external flexible cable or cord cannot be replaced. If the cord is damaged:
• Do not connect the light set to any other purpose than its intended use.
• This product is equipped with non-replaceable type lamps. Do not try to replace lamps.

PACKAGE CONTENTS

INSTALLATION OVERVIEW

1. Pull spread the legs of the tree stand (E) so it is X-shaped.

2. Remove the protective cap from the tree bottom section (D). Insert the tree bottom section (D) into the tree stand (E). Screw the eye bolt (F) through the holes in the tree stand (E) so they touch the trunk of the tree bottom section (D). Adjust the tree bottom section (D) by screwing the eye bolt (F) in or out.

3. To allow the branches to unfold into place, shape the branches of tree bottom (C). Note: Side branches should be pulled out to form the shape of a “Y”.

4. Remove the protective cap from the lower of tree middle section (C). Insert the lower of tree middle section (C) into the tree bottom section (D). While inserting the pole of the lower of tree middle section (C) to tree bottom section (D), make sure the jack and socket match each other to avoid damaging internal electrical parts. To allow the branches to unfold into place. Shape the branches of the lower of tree middle section (C).

5. Remove the protective cap from the top of tree middle section (B). Insert the top of tree middle section (B) into the lower of tree middle section (C). While inserting the pole from the top of tree middle section (B) to the lower of tree middle section (C), make sure the jack and socket match each other to avoid damaging internal electrical parts. To allow the branches to unfold into place. Shape the branches of the top of tree middle section (B).
   Remove the protective cap from the tree top section (A). Insert the tree top section (A) into the top of tree middle section (B). While inserting the pole from the tree top section (A) to the top of tree middle section (B), make sure the jack are socket match each other to avoid damaging internal electrical parts. Pull down the branches from the tree top (A). Shape the branches of tree top (A).

6. Plug the cord (G) into the power supply, all sections of the tree should be lit now. When the light sets are on press the button from the foot switch to change illumination setting:

7. Steady warm white

8. Steady multicolor

9. Fading between warm white and multicolor

10. Fading warm white

11. Fading multicolor

12. Flashing warm white

13. Flashing multicolor

14. Flashing between warm white and multicolor

15. Alternating between warm white and multicolor

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>