HOLIDAY LIVING TG50DH001D00 Bristen Pine Pre lit Artificial Tree Instruction Manual

HOLIDAY LIVING and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.

ITEM #5286300

5 FT BRISTEN PRE-LIT TREE

MODEL #TG50DH001D00

Thank you for purchasing this Holiday Living product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 888-251-1006, 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at partsplus@lowes.com.

SS23032

SAFETY INSTRUCTIONS

Please read and understand this entire manual before attempting to assemble, operate or install the product.

RISK OF FIRE
Use only adapter supplied with this product, using a different adapter will damage the lights and cause fire, electrical shock hazards.

CAUTION
To reduce the risk of overheating, replace burned-out lamps promptly. Use 3.6 volt lamps only.

• Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
• This seasonal product is not intended for permanent installation or use.
• Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
• Do not secure the wiring of product with staples or nails or place on sharp hooks or nails.
• Do not let lamps rest on the supply cord or on any wire.
• Unplug the product when leaving the house, when retiring for the night or if left unattended.
• This is an electric product–not a toy! To avoid risk of fire, burns, personal injury and electric shock, do not play with or place where small children can reach it.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list.

If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 5 minutes.

No Tools Required for Assembly.

FEELING CONFIDENT? START YOUR NEXT PROJECT

• Visit www.lowes.com for more information.

Printed in China

• Do not use this product for other than its intended use.
• Do not hang ornaments or other objects from cord, wire or light string.
• Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
• Do not cover the product with cloth, paper or any material not part of the product when in use.
• This product is equipped with push-in type lamps. Do not twist lamps.
• The controller and remote controller (if included) can only be used with this product.
• Read and follow all instructions that are on the product or provided with the product.

QUICK REFERENCE GUIDE

TROUBLESHOOTING

push (don’t twist) each bulb firmly into the socket.
2. Look and feel for a broken bulb in the socket or an empty socket where a bulb has fallen out.
Bulb is broken.| Bulb broke.| Mark the bulb with a piece of tape and unplug the tree before removing the bulb socket and any fragments. Replace the broken bulb.
One bulb will not light| Bulb burned out.| Replace any burned out bulbs.

HOW TO USE LIGHT CONTROLLER

Press the selector button on the “Light Controller” to select among:
(1) CLEAR – MULTICOLOR : FADING
(2) CLEAR : FADING
(3) CLEAR – MULTICOLOR : ALTERNATING
(4) CLEAR : STEADY
(5) CLEAR – MULTICOLOR : SLOW FADING
(6) MULTICOLOR : STEADY
(7) MULTICOLOR : FADING
(8) COMBINATION

Light Controller

1. Selector Button

REPLACEMENT PARTS LIST

For replacement parts, call our customer service department at 888-251-1006, 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at partsplus@lowes.com.

Bulb x4        Hinge Pin Retainer x1     Hinge pin x 1

PACKAGE CONTENTS

(1)                               (2)                     (3)

x1 x1 x1

INSTALLATION OVERVIEW

1. Red Labels Together
2. Insert Green Label Extension Cord into Adapter
3. Adapter To Be Plugged Into Wall Outlet
4. Control box

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>