HOLIDAY LIVING LW20-W01R1 48 Inch Mixed Needle Pre Lit LED Artificial Christmas Wreath Instruction Manual

HOLIDAY LIVING LW20-W01R1 48 Inch Mixed Needle Pre-Lit LED Artificial

Christmas Wreath

Specifications

• Brand: HOLIDAY LIVING
• Model: SG24124
• Length: 121.92 cm

Product Usage Instructions

Assembly

1. Open the wreath (A).
2. Secure the plastic tie (E) through the metal frame.
3. Hang up the wreath.
4. Insert the plug (D) into the power supply. The wreath should be lit now.

Bulb Replacement

1. If lights do not work, check for loose bulbs.
2. Gently push each bulb inward to ensure a secure connection.
3. Replace any faulty bulbs with the provided replacements.

Fuse Replacement

1. If the whole wreath doesn’t light, there may be a fuse issue.
2. Access the fuse on the plug and replace it if necessary.

Care and Maintenance

1. Please read and understand the entire manual before assembly or use.

FAQ

Q: What should I do if my wreath doesn’t light up?

A: Check for loose connections between the plug and the wall outlet. Ensure all bulbs are securely in place and replace any faulty bulbs or fuses as needed.

Q: Where can I find replacement parts?

A: For replacement parts, please visit Lowes.com, search for the item number (SG24124), and refer to the Guides & Documents tab on the product’s page.

• HOLIDAY LIVING and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
• Thank you for purchasing this HOLIDAY LIVING product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product instead of putting it together.
• But, if you need more information than what is provided here, please visit Lowes.com, search for the item number, and refer to the Guides & Documents tab on the products.

PREPARATION

• Before beginning assembly of the product, make sure all parts are present. Compare parts with the package contents list and hardware contents list.
• If any part is missing or damaged, do not attempt to assemble the product.
• Estimated Assembly Time: 15 minutes.

SAFETY INFORMATION

BULB REPLACEMENT INSTRUCTIONS

• Grasp the plug and remove it from the receptacle or other outlet device. Do not unplug by pulling on the cord.
• Pull the lamp and plastic base straight out of the lamp holder.
• Replace the lamp with only a 3.6 Volt, 0.072 Watt push-in type lamp provided with the product.
• Grip plastic not glass. Do not twist the lamp. Pull straight out. Push straight in.

FUSE REPLACEMENT INSTRUCTIONS

• Grasp the plug and remove it from the receptacle or other outlet device. Do not unplug by pulling on the cord.
• Open the fuse cover by sliding open the fuse access cover on top of the attachment plug toward the blades.
• Turn the fuse holder over and remove the fuse carefully.
• Risk of fire. Replace fuse only with 3 amp, 125 Volt fuse for the extension cord.
• Close the fuse cover by sliding the fuse access cover on top of the attachment plug.

TROUBLESHOOTING

2.  Loose bulb.

3.  Fuse failed.

| 1.  Replace bulb.

2.  Gently push each bulb inward.

3.  Replace fuse.

CARE AND MAINTENANCE

• Before using or reusing, inspect the product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cord, cracks in the lamp holders or enclosures, loose connections, or exposed copper wire.

WARRANTY

• A 2-year warranty applies to the Artificial Halloween/Christmas Wreath against defects in material or workmanship.
• Lowe’s Companies Inc. will replace defective parts on the product free of charge for 2 years from the date of purchase.
• The warranty applies only to the original purchases.
• Warranty cannot be transferred to another product or purchaser.
• Replacement, as provided by this warranty, is the exclusive remedy of the consumer and does not place Lowe’s liable for any incidental or consequential damages.
• This limited warranty does not cover damages resulting from accident, misuse, abuse, negligence, or normal wear.
• This limited warranty does not apply to Floor Models or Display Trees.
• The customer is responsible for Shipping & Handling charges.
• Lowe’s reserves the right to interpret the provisions in this warranty information. The information in this warranty may change without prior notice.
• Customer service department at 888-251-1006 8 a.m. – 8 p.m., EST, Monday – Sunday.

SAFETY INFORMATION

• Please read and understand this entire manual before attempting to assemble, operate, or install the product.

CAUTION

• The product is for indoor and outdoor use. To reduce the risk of fire, do not deliberately reposition either bulb or lampholder contact.
• To reduce the risk of overheating, replace burned-out lamps promptly. This is an electrical product, not a toy!
• To avoid the risk of fire, burns, personal injury, and electric shock it should not be played with or placed where small children can reach it.
• Do not use seasonal products outdoors unless marked as suitable for indoor and outdoor use.
• When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
• This seasonal use product is not intended for permanent installation or use.
• Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
• Do not secure the wiring of the product with staples or nails, or place it on sharp hooks or nails.
• Do not let lamps rest on the supply cord or any wire.
• Unplug the product when leaving the house, when retiring for the night, or if left unattended.
• Do not use this product for other than its intended use.
• Do not hang ornaments or other objects from cord, wire, or light string.
• Do not close doors or windows on the product or extension cord as this may damage the wire insulation.
• Do not cover the product with a cloth, paper, or any material not part of the product when in use.
• The external flexible cable or cord cannot be replaced. If the cord is damaged: DO NOT USE THIS LIGHT CHAIN. THROW LIGHT CHAIN AWAY!
• Do not connect the light set to any other purpose than its intended use.

PACKAGE CONTENTS

INSTALLATION OVERVIEW

• Open the wreath (A). Secure the plastic tie (E) through the metal frame.
• Shape the tips on the wreath (A).
• Hang up the wreath. Insert the plug (D) into the power supply. The wreath should be lit now.
• Questions, problems, or missing parts?
• Before returning, contact us at888-251-1006, 8 a.m. – 8 p.m., EST, Monday – Sunday, or ascs@lowes.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>