Holiday Living LW20-ST03 4.5 FT LED Pre-Lit Porch Tree Instruction Manual
- June 8, 2024
- Holiday LIVING
Table of Contents
Holiday Living LW20-ST03 4.5 FT LED Pre-Lit Porch Tree
Thank you for purchasing this Holiday Living product. We’ve created these
easy-to-follow instructions to ensure you spend your time enjoying the product
instead
of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item number and refer to the
Guides &
Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
888-251-1006, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
partsplus@lowes.com.
TROUBLESHOOTING
| PROBLEM | CAUSE POSSIBLE | CORRECTIVE ACTION |
|---|---|---|
| **** |
Lights do not work.
.
| 1. Loose connect between adapter and light set.
| 1. Reconnect the plug.
2. Replace the bulb.
| 2. Bulb burned out.
CARE AND MAINTENANCE
-
Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire insulation or cord, cracks in the lamp holders
or enclosures, loose connections, or exposed copper wire. -
When not in use, store neatly in a cool, dry location protected from sunlight.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
CAUTION
- Product is intended for indoor and covered outdoor use. To reduce the risk of fire, do not deliberately reposition either bulb or lampholder contact.
- To reduce the risk of overheating, replace burned out lamps promptly. This is an electrical product not a toy! To avoid the risk of fire, burns, personal injury, and electric shock it should not be played with or placed where small children can reach it.
- Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.
- When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
- This seasonal use product is not intended for permanent installation or use.
- Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
- Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
- Do not let lamps rest on the supply cord or on any wire.
- Unplug the product when leaving the house, when retiring for the night, or if left unattended.
- Do not use this product for other than its intended use.
- Do not hang ornaments or other objects from cord, wire, or light string.
- Do not close doors or windows on the product or extension cord as this may damage the wire insulation.
- Do not cover the product with a cloth, paper or any material not part of the product when in use.
SAFETY INFORMATION
BULB REPLACEMENT INSTRUCTIONS/INSTRUCTIONS POUR LE CHANGEMENT D’UNE AMPOULE
- Pull up the lamp lock, grasp plug and remove from the receptacle or other outlet device.
- Do not unplug by pulling on cord.
- Pull lamp and plastic base straight out of lamp holder.
- Replace lamp and press down the lamp lock with only 3 Volt push-in type lamp provided with product.
- Grip plastic not glass
- Do not twist lamp, pull straight out, push straight in!
PREPARATION
Before beginning installation of product, make sure all parts are present.
Compare parts with package contents list.
If any part is missing or damaged, do not attempt to assemble, install or
operate the product.
Estimated Assembly Time: 5 minutes.
PACKAGE CONTENTS
INSTALLATION OVERVIEW
- Remove the protective cap from the tree bottom section (B). Insert the tree bottom section (B) into the pot (C). Pull down the branches from the tree bottom section (B) then shape the branches.
- Insert the tree top section (A) into the tree bottom section (B). Pull down the branches from the tree top section (A) then shape the branches.
- Plug the adaptor (E) into the power supply. All sections of the tree should be lit now.