H590 Hegel Music System User Manual
- June 3, 2024
- HEGEL
Table of Contents
H590 User Manual
H590 Hegel Music System
Congratulations on your new Hegel H590. All Hegel products are based on a
simple philosophy: Add as little as possible. We work to keep the music signal
as close to the original as possible. We are always looking for ways to lower
distortion and lower noise so that the music is reproduced as close to the
original as possible and is limited only by the quality of the recording. Our
aim is to give you the best possible music experience. Our minimalistic
Scandinavian design is styled to fit in with any interior. Our products are
easy to operate and are manufactured according to the best quality principles.
“Hegel H590 is our brand new reference integrated amplifier and sets a new
standard in our lineup of integrated amps. We have taken digital technology
from our reference products, added a brand new usb solution, and given it more
power than any of our other integrated products. All that power and
versatility is set in the fresh new Hegel appearance. H590 reference is
everything that our partners and customers have asked for: a bigger and better
Hegel integrated. So we gave them a beast that controls even the biggest of
speakers in addition to more inputs, more advanced streaming and much better
sound”
Bent Holter
Founder Hegel Music System
What’s in the box
Quickstart
-
Connect your speakers
For the best audio experience the distance between the listener and each speaker should be the same.
-
Connect a source
-
Connect the power cord
-
Turn on the amplifier
General Use
Operating the H590
The source and volume can be changed using the input and volume selector on
the front panel or using the remote control.
Power Button
The H590 amplifier can be switched on and off with the power button located on
the underside of the amplifier, towards the front of the unit.
NOTE: When powering up, the H590 takes a few seconds to calibrate, the
outputs are muted and the volume flashes to indicate that mute is on. This is
normal and is part of the start-up procedure.
NOTE: When the H590 has been switched off, wait 30 seconds before
powering it on again.
Sleep/Auto standby
In compliance with the EU Energy Efficiency Directive the Hegel device will
automatically switch off after 15 minutes without sensing a signal, or with
very low signal on the speaker outputs. You can disable or change the Sleep/
Auto Standby settings in the device’s menu.*
Connections
Always power the amplifier off before connecting input/output audio cables and
the power cable.
Right Channel Speaker
-
Right outputs
Line Level Outputs -
Fixed Line level (RCA)
WARNING High level output. -
Variable Line Level (RCA)
Digital Out(DAC loop) -
BNC: Output BNC
Digital Input
- BNC: Input BNC
- Coaxial: Input Coaxial/RCA
- Optical1: Input TOSLINK/EIAJ Optical
- Optical2: Input TOSLINK/EIAJ Optical
- Optical3: Input TOSLINK/EIAJ Optical
- Computer USB input
- Home network connection (LAN – RJ45)
Left Channel Speakers
- Left outputs
Analog Inputs
- XLR1 (XLR): Standard balanced analog input (Pin 1 is Chassis Ground; Pin 2 is Positive Phase; Pin 3 is Negative Phase)
- XLR2 (XLR): Standard balanced analog input (Pin 1 is Chassis Ground; Pin 2 is Positive Phase; Pin 3 is Negative Phase)
- Analog 1(RCA): Standard analog input
- Analog 2(RCA): Standard analog input
- Analog 3(RCA): Standard analog input
AC Power Connection
- AC Power connector with fuse holder: 230V/115V/100V AC depending on country.
Home Theater
Most inputs on H590 can be used as a Home Theater input, see Device Menu.
Digital Inputs
Digital Inputs
The Hegel H590 supports MQA and DSD(DoP).*
USB
The Hegel H590 has a plug and play USB DAC. Connect it to your PC or Mac and
enjoy all your music.
There is no driver required for Linux, Mac OS, or Windows10. When connected
the amplifier will show up as “Hegel H590 USB” under the speaker settings in
your operating system. If you have an older version of Windows you will need
to install a driver. Go to support.hegel.com to
download the driver.
When using the driver your amplifier will how up as “XMOS USB Audio”.
Resolution: Up to 384 kHz 32 bit H590 supports DSD64,DSD128,DSD256 via DoP
MQA (Master Quality Authenticated)
Hegel H590 includes MQA technology, which enables you to play back MQA audio
files and streams, delivering the sound of the original master recording.
“MQA” or “MQA.” indicates that the product is decoding and playing an MQA
stream or file, and denotes provenance to ensure that the sound is identical
to that of the source material. “MQA.” indicates it is playing an MQA Studio
file, which has either been approved in the studio by the artist/producer or
has been verified by the
copyright owner. “OFS” confirms that the product is receiving a decoded MQA
stream or file. This delivers the final unfold of the MQA file and displays
the original sample rate.
Hegel H590 supports up to MQA 8X (352.8kHz/384kHz)
Visit mqa.co.uk for more information.
Remote Control – RC8
Remote control buttons (starting top left)
- PREV Skip to previous track on most media players
- PLAY Play/Pause on most media players
- NEXT Skip to next track on most media players
- DAC+ Input source selector button for Hegel DACs
- ECO On/Off (standby)
- DISP Display on/off (hold for off)
- PREV Skip to previous track on Hegel CD-players
- PLAY Play/Pause for Hegel CD-players
- NEXT Skip to next track on Hegel CD-players
- IN+ Switches to next input on Hegel amplifiers
- STOP Stop/Eject for Hegel CD-players
- VOL+ Volume up for Hegel amplifiers
- IN- Switches to previous input on Hegel amplifiers
- MUTE Mute for Hegel amplifiers
- VOL- Volume down for Hegel amplifiers
General information
The Hegel amplifier can be controlled with the included Hegel RC8 Remote
Control. The RC8 controls Hegel products, such as amplifiers and
preamplifiers, and most media players, avoiding the need for multiple remote
controls The remote control uses two standard 1.5volt LR03 AAA batteries. To
insert the batteries, use a crosshead (Phillips) screwdriver to gently remove
the four screws on the underside of the remote control. Insert the batteries
with the correct polarity with + sign and – sign, as shown inside the battery
holder. Be careful when inserting the batteries to not damage the battery
holder.
Replace the cover. Insert the screws by gently turning them by hand, to avoid
damaging the threads in the remote control chassis. Do not tighten the screws
too much, as this can damage the screws and the soft metal chassis of the
remote control.
CAUTION: Do not drop the remote control on the floor, as this can damage
its internal parts and the battery holder. Mute The MUTE(14) button mutes the
outputs on the amplifier. The volume flashes to indicate that mute is on.
Press the mute button, or adjust the volume level, to switch mute off.
On/Off (standby)
The ECO(5) button will turn the amplifier on or off (standby).
Display On/Off
The DISP(6) button may be used to turn the display on or off. Hold the DISP
button for more than 1 second to turn the display off. When adjusting inputs
or volume the
display will light up momentarily. To turn the display on again, press DISP.
Set max startup volume
When powering on the amplifier, the volume will automatically be set to the
same level as when the amplifier was switched off. To prevent the amplifier
from powering up at an unwanted volume level, it is possible to set a user
defined max startup volume. Adjust the volume to the desired max startup
volume.
Press DAC+(4) and VOL-(15) simultaneously. The volume indicator will blink
three times and the the new max startup volume hasbeen saved.
Set max volume level
A user defined volume level may be used as the amplifier’s maximum output
volume. Adjust the volume to the desired maximum level (e.g., volume 59).
Press DAC+(4) and
VOL+(12) simultaneously. The volume indicator will change to “100 Damped”. The
volume level on volume 100 is now damped to yor chosen setting (e.g., volume
59). To
reset to the default max volume level, turn the volume all the way up to “100
Damped” and press DAC+ and VOL+. The volume indicator will change back to the
level that
was set as the max volume (e.g., volume 59). The max volume has been reset to
default.
Reset to Factory Default Settings
By pressing and holding the DAC+(4) button while pressing MUTE(14), the
amplifier will be reset to factory settings. This can also be done from the
device menu
Network Setup
Connection
To be able to use the amplifier’s network and streaming features, the
amplifier needs to be connected to your local network.
Connect your Hegel amplifier using an Ethernet cable (not supplied) from the
network connection (LAN – RJ45) port on the back of the amplifier, to your
router.
Network settings
The amplifier has its own Network Configuration page where you can change the
amplifier’s network name and IP settings.
To open the page, enter your amplifiers IP address in a browser window. You
can find the IP address in the amplifier’s menu under “Network”.
For detailed information on the Network Configuration page, supported formats
and much more, please visit support.hegel.com
NOTE: Some of the features of the Hegel device require an internet
connection. Wake up on Network
Even when the amplifier is in standby mode the network connection is active.
The amplifier can be woken up from standby by starting playback to the Hegel.
Status Indicators
The Hegel device will display the network status in the lower left corner of
the display.
Network status is OK: Network status is not OK:
Troubleshooting
If you experience problems with connecting the amplifier to the network or
have other network issues, please try the following:
Disconnect the power chord for at least 30 seconds and then reconnect.
If that does not help, try the following: Enter the amplifier menu and select
factory reset.
Streaming
AirPlay
With Apple AirPlay you can stream audio from an AirPlay compatible device to
the Hegel device.
Choose the Hegel device in the list of AirPlay speakers. Go to
support.apple.com tolearn how.
Spotify Connect Spotify is a digital music, podcast, and video streaming service that gives you access to millions of songs and other content from artists all over the world. You can stream audio from Spotify to the Hegel device. Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how.
Roon Ready
Roon is a music management and listening solution which is dedicated to high
sound quality and exceptional user experience.
You can stream audio from Roon to the Hegel device. Go to
hegel.com/roon to learn more and to register for a
free trial period.
UPnP/DLNA
UPnP stands for Universal Plug and Play and is a widely used media streaming
protocol that is supported by a host of media player products and
applications. The Hegel device functions as a digital media renderer. When
using UPnP/DLNA you can stream from locally stored files or music streaming
services to the Hegel device. For details on how to set up your media player,
please refer to the user manual supplied with the player.
WARNING: When streaming to the Hegel device, always remember to check the
player/device volume-setting before pressing play. The Hegel device will
change its volume to the volume set in the player.
Device Menu
Navigation
To enter the device menu, turn the amplifier on and press and hold the PLAY(2)
button for 5 seconds. To navigate the menu, use the PREV(1) and NEXT(3)
buttons. To select a sub-menu or feature, press the “PLAY(2) button. To exit
the menu, navigate to “Exit” and press PLAY(2), or turn one of the amplifier’s
knobs.
NOTE: Some menu features require connection to the internet to work
properly. See Network Setup
Info
Information about the Hardware Version of your product and the Software
Version currently running.
Network
Information about the Network Device Name and the IP Address of your product.
Update
Check for and download the newest software for your product.
Sleep
By default, the amplifier will automatically switch itself off after 15
minutes without music, or with very low signal on the speaker outputs. Sleep /
Auto off can be disabled in this menu.*
Reset
Here you can reset the product to the de- fault factory settings. This will
not affect any software updates you have installed.
HT
Most inputs can be configured to act as a Home Theater input. This will set
the input volume at a fixed high volume level.
NOTE: The Hegel device menu can be updated with new fea- tures and
options.
For an up to date and in-depth description of the menu and its features,
please visit support.hegel.com
https://support.hegel.com/product-articles/device-menu
Miscellaneous
USB Volume
In the device menu you can activate the USB Volume feature. That enables you
to control the volume of the device with a connected USB source like a
computer or a streamer.
Warning: Always remember to check the computer or connected device volume
setting before pressing play. When USB volume is activated the amplifier will
change its
volume to the volume setting on the computer or connected device.
Connecting a subwoofer
The most common way to connect a subwoofer is from the variable line output on
your Hegel amplifier. If your subwoofer is equipped with “high level” speaker
wire terminals you can also use this. Many subwoofer manufacturers recommend
this type of connection if it is available.
Please consult your subwoofer manual for detailed instructions on how to
connect and configure your subwoofer for the best audio result.
Power
All electrical components should be turned off or in standby when not in use.
This due to safety, because all electrical components can fail, and it is good
for the environment. Leaving your product on all the time could also shorten
the life expectancy of the product.
That being said, our products sound even better when they are warmed up,
typically after about 15 minutes of listening at a moderate volume.
Connecting your TV
The best way to connect your TV is by using one of the optical inputs. If
there is no sound, try changing the sound output in the TV’s settings menu.
The setting should be changed to PCM or stereo. Please consult your TV’s
manual for detailed instructions.
DAC-loop/Digital out
Your device comes equipped with a DACLoop function that can be activated in
the device menu. The function makes it possible to upgrade the digital inputs
of the amplifier with an external high-end DAC. This is done by connecting the
jitter reduced coaxial digital output of the amplifier to the external DAC.
The output of the external DAC will need to be connected to the XLR input of
the amplifier.
In the DAC-Loop submenu the Network and USB inputs can be enabled separately.
Both these inputs take full advantage of the internal synchronous master
clock. For these inputs we recommend leaving the DAC-Loop function disabled as
it in most cases will not benefit the sound. In this submenu you can also
enable the digital output to always be active.
General Information
Technical Specifications H590 Integrated Amplifier
Power output| 2301W in 8 ohms
Dual Mono
---|---
Minimum load| 2 ohms
Analog Inputs| 2Balanced (XLR)
3Unbalanced (RCA)
Digital Outputs| 1Coaxial (BNC) S/PDIF
Digital Inputs| 1Coaxial (BNC) S/PDIF
1Coaxial (RCA) S/PDIF
3Optical S/PDIF
1USB
1Network
Line level Output| 1Unbalanced fixed(RCA),
1Unbalanced variable(RCA)
MQA supported inputs Frequency response| USB only
Signal-to-noise ratio| 5Hz-100kHz
Crosstalk| More than 100dB
Distortion| Less than -100dB
Less than 0.005% @
50W 8 Ohms 1kHz
Intermodulation| Less than 0.01%
(19kHz + 20kHz)
Damping factor| More than 4000
(main power output stage)
Dimensions| 17,1cm x 43cm x 44,5cm
(HxWxD), 22kg unit weight. 6,74” x 16,93” x 17,52” (HxWxD), 48,51 lbs unit
weight.
Transport and Shipment
When packing the amplifier, please follow these instructions to avoid damaging
the unit: Be careful not to hold the volume- and source-knobs when lifting the
amplifier.
Wrap the bag around the amplifier. Make sure the bottom shock absorber is
placed at the bottom of the original cardboard box. Place the amplifier into
the shock absorber.
Place the top shock absorber on top of the amplifier.
Use and Placement
The Hegel amplifier should be placed on a flat, hard surface for proper
cooling. The amplifier must never be placed on a carpet or similar surface as
this obstructs air circulation through the unit. For the same reason, the
amplifier should have sufficient clearing above, and never be covered while in
use.
The amplifier will automatically switch itself off if overheated. When it
cools down the amplifier turns back on and the volume is set to 0. xD),
Cleaning
Fingerprints or stains on the front panel or top cover can be removed with a
cloth moistened with warm water or a mild detergent suitable for cleaning
mirrors and windows.
Warning
Hegel products should only be opened or serviced by certified technicians. The
devices contain electronic components that may cause severe electric shock.
Work performed on Hegel products by unqualified personnel may cause serious
damage or personal injury.
Opening of the product by non-authorized personnel will void the warranty.
The products must not be exposed to rain or moisture.
Warranty
All Hegel products come with a 2-year warranty against defective materials and
workmanship. The warranty is limited to the region where it was originally
purchased.
There is no need for registering the warranty. The purchase receipt will work
as a start date for the warranty.
In case you need assistance with your Hegel product, please contact your
nearest dealer or distributor. These are listed on
www.hegel.com. Our dealers are carefully
chosen for their expertise and should be able to help you with any Hegel
related issue. You can of course always reach us directly by sending an email
to info@hegel.com or by contacting us on our social
media pages.
For more information about the H590, please visit
www.hegel.com
https://www.hegel.com/products/integrated/h590
Disclaimers
The Spotify Software is subject to third party licenses found here:
www.spotify.com/connect/third-party-licenses AirPlay works with iPhone, iPad, and iPod touch, or Mac
and PC with iTunes. Use of the “Works with Apple AirPlay” badge means that an
accessory has been designed to work specifically with the technology
identified in the badge and has been certified by the developer to meet Apple
performance standards. Apple AirPlay, iPad, iPhone, iPod touch, Mac and macOS
are trademarks of Apple Inc., registered in the U.S. and other countries. The
trademark “iPhone” is used in Japan with a license from Aiphone K.K.
MQA and the Sound Wave Device are registered trade marks of MQA Limited.© 2016
Being Roon Ready means that Hegel uses Roon streaming technology, for an
incredible user interface, simple setup, rock-solid daily reliability, and the
highest levels of audio performance, without compromise.
- Depending on market, versions of this amplifier exist with and without Sleep/Auto standby. Sleep/Auto standby has no bearing on sound quality or connectivity. Devices produced after August 2020 and with the letter “E” in the serial number has Sleep/Auto standby, supports MQA on all digital inputs and DSD(DoP) on all digital inputs except for optical.
References
- Homepage | Experience the best sound with MQA | MQA
- Spotify - Connect
- Select Your Product
- Hegel Music Systems - High-end audio electronics designed in Norway
- Third Party Licenses | Spotify for Developers
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>