HEGEL H95 Integrated Amplifier User Manual
- June 5, 2024
- HEGEL
Table of Contents
H95
User Manual
Congratulations on your new Hegel H95.
All Hegel products are based on a simple philosophy: Add as little as
possible. We always aim to keep the music signal close to the original
recording. We are constantly looking for ways to lower distortion and noise.
By lowering noise, we unveil layers of music covered by noise. And by lowering
the distortion we can have a better and more precise reproduction of the
recording. We work hard to give you the best possible music experience. Our
minimalistic Scandinavian design is styled to fit in with any interior. The
products are easy to operate and manufactured according to the best quality
principles.
Bent Holter
Founder Hegel Music System
What’s In The Box
Quickstart
- Connect your speakers
For the best audio experience, the distance between the listener and each speaker should be the same.
2. Connect a source
3. Connect the power cord
4. Turn on the amplifier
General Use
Operating the H95
The source and volume can be changed using the input and volume selector on
the front panel or using the remote control.
Power Button
The H95 amplifier can be switched on and off with the power button located on
the underside of the amplifier, towards the front of the unit.
NOTE: When powering up, the H95 takes a few seconds to calibrate, the
outputs are muted and the volume flashes to indicate that mute is on. This is
normal and is part of the start-up procedure.
NOTE: When the H95 has been switched off, wait 30 seconds before powering
it on again.
Headphone Output
Connect the 6.3mm headphone jack to the front of the H95. This activates the
headphone volume control and mutes the speaker outputs.
NOTE: Variable Line Output is still active. Sleep/Auto standby
In compliance with the EU Energy Efficiency Directive, the Hegel device will
automatically switch off after 15 minutes without sensing a signal, or with
very low signal on the speaker outputs. You can disable or change the Sleep/
Auto Standby settings in the device’s menu.
Connections
Always power the amplifier off before connecting input/output audio cables and the power cable.
Speakers
-
Right outputs
-
Left outputs
Line Outputs -
Variable Line Level (RCA)
Analog Inputs -
Analog 1(RCA): Standard analog input
-
Analog 2(RCA): Standard analog input
If you want to connect the amplifier to a Home Theater system, see Device Menu
AC Power Connection
- AC Power connector with fuse holder: 230V/115V/100V AC depending on country.
Digital Connections
- Coax1: Input Coaxial/RCA
- Optical1: Input TOSLINK/EIAJ Optical
- Optical2: Input TOSLINK/EIAJ Optical
- Optical3: Input TOSLINK/EIAJ Optical
- Computer USB input
- Home network connection (LAN – RJ45)
Remote Control – RC10
The Hegel H95 can be controlled with the included Hegel RC10 Remote Control.
The RC10 controls other Hegel products, such as amplifiers and preamplifiers,
and most Media players on your Mac/PC, avoiding the need for multiple remote
control devices.
– The remote control uses one CR2032 battery. To insert the battery, slide
down the battery cover. Place the battery on plus side up, and replace the
battery cover.
NOTE: The remote control is delivered with batteries installed. However,
you must open the battery cover and remove the plastic protection for the RC10
to function.
Remote control buttons (starting top left)
- On/Off (standby)
- Mute for Hegel amplifiers
- Volume up for Hegel amplifiers
- Skip to previous track on most media players
- Play/Pause on most media players
- Skip to next track on most media players
- Volume down for Hegel amplifiers
- Switches to previous input on your Hegel amplifier
- Switches to the next input on your Hegel amplifier
- Select input on most separate Hegel DACs
- Display on/off (hold for off)
- Volume down for Hegel DACs
- Volume up for Hegel DACs
Device Menu
Navigation
To enter the device menu, turn the amplifier on and press and hold the PLAY(5)
button for 5 seconds. To navigate the menu, use the VOL+(3) and VOL-(7)
buttons. To select
a sub-menu or feature, press the “PLAY(5) button. To exit the menu, navigate
to “Exit” and press PLAY(5), or turn one of the amplifier’s knobs.
NOTE: Some menu features require a connection to the internet to work
properly. See Network Setup.
Info
Information about the Hardware Version of your product and the Software
Version currently running.
Network
Information about the Network Device Name and the IP Address of your product.
Update
Check for and download the newest software for your product.
Sleep
By default, the amplifier will automatically switch itself off after 15
minutes without music, or with very low signal on the speaker outputs. Sleep /
Auto-off can be disabled in this menu.
Reset
Here you can reset the product to the de-fault factory settings. This will not
affect any software updates you have installed.
HT
Most inputs can be configured to act as a Home Theater input. This will set
the input volume at a fixed high volume level.
NOTE: The Hegel device menu can be updated with new fea- tures and
options.
For an up to date and in-depth description of the menu and its features,
please visit support.hegel.com
https://support.hegel.com/product-articles/device-menu
Network Setup
Connection
To be able to use the amplifier’s network and streaming features, the
amplifier needs to be connected to your local network. Connect your Hegel
amplifier using an Ethernet cable (not supplied) from the network connection
(LAN – RJ45) port on the back of the amplifier to your router.
Network settings
The amplifier has its own Network Configuration page where you can change the
amplifier’s network name and IP settings. To open the page, enter your
amplifier’s IP address in a browser window. You can find the IP address in the
amplifier’s menu under “Network”.
For detailed information on the Network Configuration page, supported formats
and much more, please visit support.hegel.com
https://www.hegel.com/products/integrated/h95
NOTE: Some of the features of the Hegel device require an internet connection.
Wake up on Network
Even when the amplifier is in standby mode the network connection is active.
The amplifier can be woken up from standby by starting playback to the Hegel.
Status Indicators
The Hegel device will display the network status in the lower-left corner of
the display.Network status is OK:
Troubleshooting
If you experience problems with connecting the amplifier to the network or
have other network issues, please try the following:
Disconnect the power chord for at least 30 seconds and then reconnect. If that
does not help, try the following:
Enter the amplifier menu and select factory reset.
Streaming
AirPlay
When using AirPlay, you can send the music stream from an AirPlay-compatible
device to the Hegel device. All AirPlay-compatible devices will detect the
Hegel device in their list of AirPlay speakers. When both devices are
connected to the same network, the AirPlay icon will be displayed, and you can
select the Hegel device as an AirPlay speaker.
You are now ready to send the music stream to your amplifier.
Spotify Connect
When using Spotify Connect, you can send the music stream from Spotify to the
Hegel device.
Use your phone, tablet or computer as a remote control for Spotify. Go to
spotify.com/connect to learn how.
UPnP/DLNA
The amplifier can function as a Digital Media Renderer. This means that it can
receive and play media files from a UPnP/ DLNA compatible media player. When
using UPnP/DLNA streaming, you can send the music stream from locally stored
files or music streaming services to the Hegel device. UPnP stands for
Universal Plug and Play and is a widely used media streaming protocol. That
means it is supported by a host of products and applications. For details on
how to set up your media player, please refer to the user manual supplied with
the player.
WARNING: When streaming to the Hegel device, always remember to check the
player/device volume setting before pressing play. The Hegel device will
change its volume to the volume set in the player.
Miscellaneous
Using the USB Connection
When you connect your Hegel device to a computer with a USB cable (not
included), the Hegel will automatically install itself asa USB soundcard on
all newer versions of Windows, macOS, and most Linux operating systems.
NOTE: The first time you connect your computer to your Hegel device,
connect the computer to the internet and close all media players.
Troubleshooting with macOS
The Hegel device is connected, but there is no sound: Go to System Preferences
– Sound – Output and select “TE7022 Audio w/ SPDIF” as the Output Device.
Connecting a subwoofer
The most common way to connect a subwoofer is from the variable line output on
your Hegel amplifier. If your subwoofer is equipped with “high level” speaker
wire terminals you can also use this. Many subwoofer manufacturers recommend
this type of connection if it is available.
Please consult your subwoofer manual for detailed instructions on how to
connect and configure your subwoofer for the best audio result.
Power
All electrical components should be turned off or in standby when not in use.
This due to safety, because all electrical components can fail, and it is good
for the environment. Leaving your product on all the time could also shorten
the life expectancy of the product.
That being said, our products sound even better when they are warmed up,
typically after about 15 minutes of listening at a moderate volume.
Connecting your TV
The best way to connect your TV is by using one of the optical inputs. If
there is no sound, try changing the sound output in the TV’s settings menu.
The setting should be changed to PCM or stereo. Please consult your TV’s
manualfor detailed instructions.
General Information
Technical Specifications
H95 Integrated Amplifier
| Power output | 2*60W in 8 Ohms |
|---|---|
| Minimum load | 2 Ohms |
| Analog Inputs | 2*Unbalanced (RCA), |
| Digital Inputs | 1*Coaxial S/PDIF, |
3Optical S/PDIF,
1USB, 1Network
Line-level Output| 1Unbalanced Variable(RCA)
Frequency response| 5Hz-100kHz
Signal-to-noise ratio| More than 100dB
Crosstalk| Less than -100dB
Distortion| Less than 0.01% @
25W 8 Ohms 1kHz
Intermodulation| Less than 0.01%
(19kHz + 20kHz)
Damping factor| More than 2000
(main power output stage)
Dimensions including feet, terminals and controls:| 10cm x 43cm x 35cm (HxWxD)
10,6kg shipment weight.
3.94” x 16.93” x 13.78” (HxWxD)23.36lbs shipment weight.
Transport and Shipment
When packing the amplifier, please follow these instructions to avoid damaging
the unit: Be careful not to hold the volume- and source knobs when lifting the
amplifier.
Insert the amplifier into the plastic bag.
Ensure the plastic bag does not press tightly on the knobs as this may damage
them during transportation.
Place the amplifier into the shock absorbers. Place the amplifier with
absorbers into the original cardboard box.
Use and Placement
The Hegel amplifier should be placed on a flat, hard surface for proper
cooling. The amplifier must never be placed on a carpet or similar surface as
this obstructs air circulation through the unit. For the same reason, the
amplifier should have sufficient clearing above, and never be covered while in
use.
The amplifier will automatically switch itself off if overheated. When it
cools down the amplifier turns back on and the volume is set to 0.
Cleaning
Fingerprints or stains on the front panel or top cover can be removed with a
cloth moistened with warm water or a mild detergent suitable for cleaning
mirrors and windows.
Warning
Hegel products should only be opened or serviced by certified technicians. The
devices contain electronic components that may cause severe electric shock.
Work performed on Hegel products by unqualified personnel may cause serious
damage or personal injury.
Opening of the product by non-authorized personnel will void the warranty.
The products must not be exposed to rain or moisture.
Warranty
All Hegel products come with a 2-year warranty against defective materials and
workmanship. The warranty is limited to the region where it was originally
purchased. There is no need for registering the warranty. The purchase receipt
will work as a start date for the warranty.
In case you need assistance with your Hegel product, please contact your
nearest dealer or distributor. These are listed on
www.hegel.com. Our dealers are carefully chosen for
their expertise and should be able to help you with any Hegel-related issue.
You can of course always reach us directly by sending an email to
[email protected] or by contacting us on our social
media pages.
Disclaimers
The Spotify Software is subject to third party licenses found here:
www.spotify.com/connect/third-party-licenses
AirPlay works with iPhone, iPad, iPod touch, or Mac and PC with iTunes.
Use of the “Works with Apple AirPlay” badge means that an accessory has been
designed to work specifically with the technology identified in the badge and
has been certified by the developer to meet Apple performance standards.
Apple AirPlay, iPad, iPhone, iPod touch, Mac, and macOS are trademarks of
Apple Inc., registered in the U.S. and other countries. The trademark “iPhone”
is used in Japan
with a license from Aiphone K.K.
For more information about the H95,
please visit www.hegel.com
References
- All-guides – Innovative Search Service of Online Manuals
- Spotify - Connect
- Select Your Product
- Hegel Music Systems - High-end audio electronics designed in Norway
- Third Party Licenses | Spotify for Developers
- Page not found - Spotify