HEGEL H190 Integrated Amplifier User Manual
- June 5, 2024
- HEGEL
Table of Contents
HEGEL H190 Integrated Amplifier User Manual
What’s in the box
Quick start
-
Connect your speakers
For the best audio experience the distance between the listener and each speaker should be the same.
-
Connect a source
-
Connect the power cord
-
Turn on the amplifier
General Use
Operating the H190 The source and volume can be changed using the input and volume selector on the front panel or using the remote control.
Power Button The H190 amplifier can be switched on and off with the power button located on the underside of the amplifier, towards the front of the unit.
NOTE: When powering up, the H190 takes a few seconds to calibrate, the outputs are muted and the volume flashes to indicate that mute is on. This is normal and is part of the start-up procedure.
Headphone Output Connect the 6.3mm headphone jack to the front of the H190. This activates the headphone volume control and mutes the speaker outputs.
NOTE: Variable Line Output is still active.
Sleep/Auto standby
In compliance with the EU Energy Efficiency Directive the Hegel device will
automatically switch off after 15 minutes without sensing a signal, or with
very low signal on the speaker outputs. You can disable or change the Sleep/
Auto Standby settings in the device’s menu.*
NOTE: When the H190 has been switched off, wait 30 seconds before powering it on again.
Connections
Always power the amplifier off before connecting input/output audio cables and the power cable.
Speakers
- Right outputs
- Left outputs
Line Level Outputs
- Fixed Line level (RCA) WARNING High level output.
- Variable Line Level (RCA)
Analog Inputs
- Analog 1(RCA): Standard analog input
- Analog 2(RCA): Standard analog input
- Balanced (XLR): Standard balanced analog input (Pin 1 is Chassis Ground; Pin 2 is Positive Phase; Pin 3 is Negative Phase)
Digital Connections
- Coaxial: Input Coaxial/RCA
- Optical1: Input TOSLINK/EIAJ Optical
- Optical2: Input TOSLINK/EIAJ Optical
- Optical3: Input TOSLINK/EIAJ Optical
- Computer USB input
- Home network connection (LAN – RJ45)
AC Power Connection
- AC Power connector with fuse holder: 230V/115V/100V AC depending on country.
If you want to connect the amplifier to a Home Theater system, see Device Menu
Remote Control – RC8
Remote control buttons (starting top left)
- PREV Skip to previous track on most media players
- PLAY Play/Pause on most media players
- NEXT Skip to next track on most media players
- DAC+ Input source selector button for Hegel DACs
- ECO On/Off (standby)
- DISP Display on/off (hold for off)
- PREV Skip to previous track on Hegel CD-players
- PLAY Play/Pause for Hegel CD-players
- NEXT Skip to next track on Hegel CD-players
- IN+ Switches to next input on Hegel amplifiers
- STOP Stop/Eject for Hegel CD-players
- VOL+ Volume up for Hegel amplifiers
- IN- Switches to previous input on Hegel amplifiers
- MUTE Mute for Hegel amplifiers
- VOL- Volume down for Hegel amplifiers
General information
The Hegel amplifier can be controlled with the included Hegel RC8 Remote
Control. The RC8 controls Hegel products, such as amplifiers and
preamplifiers, and most media players, avoiding the need for multiple remote
controls
The remote control uses two standard 1.5volt LR03 AAA batteries. To insert the batteries, use a crosshead (Phillips) screwdriver to gently remove the four screws on the underside of the remote control.
Insert the batteries with the correct polarity with + sign and sign, as shown inside the battery holder. Be careful when inserting the batteries to not damage the battery holder.
Replace the cover. Insert the screws by gently turning them by hand, to avoid damaging the threads in the remote control chassis. Do not tighten the screws too much, as this can damage the screws and the soft metal chassis of the remote control.
CAUTION: Do not drop the remote control on the floor, as this can damage its internal parts and the battery holder.
Mute
The MUTE(14) button mutes the outputs on the amplifier. The volume flashes to
indicate that mute is on. Press the mute button, or adjust the volume level,
to switch mute off.
On/Off (standby)
The ECO(5) button will turn the amplifier on or off (standby).
Display On/Off
The DISP(6) button may be used to turn the display on or off. Hold the DISP
button for more than 1 second to turn the display off. When adjusting inputs
or volume the display will light up momentarily. To turn the display on again,
press DISP.
Set start-up volume
A user defined volume may be used as the power-up volume. Adjust the volume to
the desired start up level. Press DAC+(4) and VOL-(15) simultaneously. The
volume number will blink three times to indicate that the new start up volume
has been saved.
Set max volume
A user defined volume may be used as the max volume. Adjust the volume to the
desired maximum level. Press DAC+(4) and VOL+(12) simultaneously. The volume
indicator will blink three times to indicate that the new max volume has been
saved. To restore to the default max volume of 99, turn the volume all the way
up and press DAC+ and VOL+ once more. The volume indicator will blink 99 three
times to indicate that the max volume has been reset.
Reset to Factory Default Settings
By pressing and holding the DAC+(4) button while pressing MUTE(14), the
amplifier will be reset to factory settings. This will clear all user defined
settings, including IP settings, and restart the amplifier. This can also be
done in the amplifier’s menu. Software updates will not be affected.
Network Setup
Connection
To be able to use the amplifier’s network and streaming features, the
amplifier needs to be connected to your local network. Connect your Hegel
amplifier using an Ethernet cable (not supplied) from the network connection
(LAN – RJ45) port on the back of the amplifier, to your router.
Network settings
The amplifier has its own Network Configuration page where you can change the
amplifier’s network name and IP settings. To open the page, enter your
amplifiers IP address in a browser window. You can find the IP address in the
amplifier’s menu under “Network”.
For detailed information on the Network Configuration page, supported formats and much more, please visit support.hegel.com
Status Indicators
The Hegel device will display the network status in the lower left corner of
the display.
Troubleshooting
If you experience problems with connecting the amplifier to the network or
have other network issues, please try the following:
NOTE: Some of the features of the Hegel device require an internet connection.
Disconnect the power chord for at least 30 seconds and then reconnect.
Wake up on Network
Even when the amplifier is in standby mode the network connection is active.
The amplifier can be woken up from standby by starting playback to the Hegel.
If that does not help, try the following: Enter the amplifier menu and select factory reset.
Using AirPlay Streaming
AirPlay When using AirPlay, you can send the music stream from an AirPlay compatible device to the Hegel device. All AirPlay compatible devices will detect the Hegel device in their list of AirPlay speakers.
When both devices are connected to the same network, the AirPlay icon will be displayed, and you can select the Hegel device as an AirPlay speaker. You are now ready to send the music stream to your amplifier.
UPnP/DLNA
The amplifier can function as a Digital Media Renderer. This means that it can
receive and play media files from a UPnP/ DLNA compatible media player. When
using UPnP/DLNA streaming, you can send the music stream from locally stored
files or music streaming services to the Hegel device. UPnP stands for
Universal Plug and Play and is a widely used media streaming protocol. That
means it is supported by a host of products and applications. For details on
how to set up your media player, please refer to the user manual supplied with
the player.
WARNING: When streaming to the Hegel device, always remember to check the player/device volume-setting before pressing play. The Hegel device will change its volume to the volume set in the player.
Spotify Connect
When using Spotify Connect, you can send the music stream from Spotify to the Hegel device.
Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how.
Device Menu
Navigation
To enter the device menu, turn the amplifier on and press and hold the PLAY(2)
button for 5 seconds. To navigate the menu, use the PREV(1) and NEXT(3)
buttons. To select a sub-menu or feature, press the “PLAY(2) button. To exit
the menu, navigate to “Exit” and press PLAY(2), or turn one of the amplifier’s
knobs.
NOTE: Some menu features require connection to the internet to work properly. See Network Setup
Info
Information about the Hardware Version of your product and the Software
Version currently running.
Network
Information about the Network Device Name and the IP Address of your product.
Update
Check for and download the newest software for your product.
Sleep
By default, the amplifier will automatically switch itself off after 15
minutes without music, or with very low signal on the speaker outputs. Sleep /
Auto off can be disabled in this menu.*
Reset
Here you can reset the product to the default factory settings. This will not
affect any software updates you have installed.
HT
Most inputs can be configured to act as a Home Theater input. This will set
the input volume at a fixed high volume level.
NOTE: The Hegel device menu can be updated with new features and options. For an up to date and in-depth description of the menu and its features, please visit support.hegel.com
Miscellaneous
Using the USB Connection
When you connect your Hegel device to a computer with a USB cable (not
included), the Hegel will automatically install itself as a USB soundcard on
all newer versions of Windows, macOS, and most Linux operating systems.
NOTE: The first time you connect your computer to your Hegel device, connect the computer to the internet and close all media players.
Troubleshooting with macOS The Hegel device is connected, but there is no sound: Go to System Preferences Sound Output and select “TE7022 Audio w/ SPDIF” as the Output Device.
Connecting a subwoofer
The most common way to connect a subwoofer is from the variable line output on
your Hegel amplifier. If your subwoofer is equipped with “high level” speaker
wire terminals you can also use this. Many subwoofer manufacturers recommend
this type of connection if it is available.
Power
All electrical components should be turned off or in standby when not in use.
This due to safety, because all electrical components can fail, and it is good
for the environment. Leaving your product on all the time could also shorten
the life expectancy of the product.
That being said, our products sound even better when they are warmed up, typically after about 15 minutes of listening at a moderate volume.
Connecting your TV
The best way to connect your TV is by using one of the optical inputs. If
there is no sound, try changing the sound output in the TV’s settings menu.
The setting should be changed to PCM or stereo. Please consult your TV’s
manual for detailed instructions.
Please consult your subwoofer manual for detailed instructions on how to connect and configure your subwoofer for the best audio result.
General Information
Technical Specifications H190 Integrated Amplifier
Transport and Shipment
When packing the amplifier, please follow these instructions to avoid damaging
the unit: Be careful not to hold the volume- and source-knobs when lifting the
amplifier.
Insert the amplifier into the plastic bag. Ensure the plastic bag does not press tightly on the knobs as this may damage them during transportation.
Place the amplifier into the shock absorbers. Place the amplifier with absorbers into the original cardboard box.
Use and Placement
The Hegel amplifier should be placed on a flat, hard surface for proper
cooling. The amplifier must never be placed on a carpet or similar surface as
this obstructs air circulation through the unit. For the same reason, the
amplifier should have sufficient clearing above, and never be covered while in
use.
The amplifier will automatically switch itself off if overheated. When it cools down the amplifier turns back on and the volume is set to 0.
Cleaning
Fingerprints or stains on the front panel or top cover can be removed with a
cloth moistened with warm water or a mild detergent suitable for cleaning
mirrors and windows.
Warning
Hegel products should only be opened or serviced by certified technicians. The
devices contain electronic components that may cause severe electric shock.
Work performed on Hegel products by unqualified personnel may cause serious
damage or personal injury.
Opening of the product by non-authorized personnel will void the warranty.
The products must not be exposed to rain or moisture.
Warranty
All Hegel products come with a 2-year warranty against defective materials and
workmanship. The warranty is limited to the region where it was originally
purchased. There is no need for registering the warranty. The purchase receipt
will work as a start date for the warranty.
Disclaimers
The Spotify Software is subject to third party licenses found here:
www.spotify.com/connect/third-party-licenses
AirPlay works with iPhone, iPad, and iPod touch, or Mac and PC with iTunes.
Use of the “Works with Apple AirPlay” badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards.
Apple AirPlay, iPad, iPhone, iPod touch, Mac and macOS are trademarks of Apple Inc., registered in the U.S. and other countries. The trademark “iPhone” is used in Japan with a license from Airphone K.K.
- Depending on market, versions of this amplifier exist with and without Sleep/Auto standby. Sleep/Auto standby has no bearing on sound quality or connectivity.
In case you need assistance with your Hegel product, please contact your nearest dealer or distributor. These are listed on www.hegel.com. Our dealers are carefully chosen for their expertise and should be able to help you with any Hegel related issue. You can of course always reach us directly by sending an email to info@hegel.com or by contacting us on our social media pages.
For more information about the H190, please visit www.hegel.com
References
- Spotify - Connect
- Select Your Product
- Hegel Music Systems - High-end audio electronics designed in Norway
- Third Party Licenses | Spotify for Developers
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>