beko EFS5100W Stand Fan User Manual
- June 3, 2024
- Beko
Table of Contents
Stand fan
User Manual
EFS5100W
01M-8837513200-4720-01
EFS5100W Stand Fan
Please read this user manual first!
Dear Customer,
Thank you for preferring a Beko product. We hope that you get the best results
from your product which has been manufactured with high quality and state-of-
the-art technology, Therefore, please read this entire user manual and all
other accompanying documents carefully before using the product and keep it as
a reference for future use If you handover the product to someone eke, give
the user manual as well. Follow all warnings and information in the user
manual,
Meanings of the symbols
Following symbols are used in the various section of this manual:
| Important information or useful hints about usage.
---|---
| Warning for hazardous situations with regard to life and property.
| Warning to actions that must never perform.
| Warning for electric shock.
****| Warning for danger of fire.
| Warning for hot surfaces.
This product has been produced in environmentally friendly, modern facilities Complies with the WEEE Regulation. ****
Safety instructions
Warning Read rules for safe operation and instructions carefully.
-
If the supply cord is damaged, it must be replaced by manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
-
To protect against the risk of electrical shock, do not immerse the unit, cord or plug in water or other liquid.
-
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision,
-
When the appliance is not in use and before cleaning, unplug the appliance from the outlet.
-
Keep electrical appliances out of reach from children or infirm persons. Do not let them use the appliances without supervision.
-
When the fan was assembled, the rotor blade guard shall not be taken off anymore.
– Prior cleaning unplug the fan.
– The rotor guard shall not be dissembled/opened to clean the rotor blades
– Wipe the fan enclosure and rotor blade guard with a slightly damp cloth. -
This symbol indicates that this product shall not be disposed with other household wastes at the end of its service life. Used device must be returned to official collection point for recycling of electrical and electronic devices. To find these collection systems please contact to your local authorities or retailer where the product was purchased. Each household performs important role in recovering and recycling of old appliance. Appropriate disposal of used appliance helps prevent potential negative consequences for the environment and human health.
Rules for safe operation
- Never insert fingers, pencils, or any other object through the grille when fan is running.
- Disconnect fan when moving from one location to another.
- Be sure fan is on a stable surface when operating to avoid overturning.
- Do not use fan in window, rain may create electrical hazard.
- Household use only.
Part figure
1, Front grill
2. Fan blade
3. Plastic nut
4. Motor shaft
5. Clutch knob
6. Motor housing
7. Fan body
8. Thumb screw
9. Height adjustment ring| 10. 7-shape bolt
11. Chassis
12. Extension pole
13. Internal pole
14, Piano switch
15. Timer
16. Rear grill
17. Circlip
18. Spinner
---|---
Note: All the pictures in this manual are for explanation purpose only. Any discrepancy between the real object and the illustration in the drawing shall be subject to the real subject.
Assembly of chassis & column unit
-
Unscrew the 7-shape bolt from the extension pole. (Fig.1)
-
Insert the extension pole into the chassis and tighten the 7-shape bolt (Fig,?)
-
From the extension pole loosen the height adjustment ring and adjust the internal pole to the desired height.
Note: If you can’t find the internal pole, it must inside the extension pole. You can pull it out from the extension pole. (Fig.3) -
To attach the head unit to the internal pole, loosen the thumb screw on the bottom of the head unit. Place the head unit on the internal pole and tighten the thumb screw in alignment with the groove on the internal pole. (Fig.4)
Warning: Height adjustment ring must be fully fastened before the
assembly of the motor section to the internal pole.
Grill & fan blade assembly
- Unscrew the spinner clockwise (or take the spinner out from the bag) and the plastic nut counterclockwise to remove both of them. Fix the rear grill to the motor then tighten the plastic nut again. (Fig. 5)
- Insert the blade into shaft, and make sure the rotor shaft pin is fitted into groove of the blade. Turn the spinner counterclockwise to tighten the blade. (Fig. 6)
- Fasten the front grill and the rear grill by the grill clip and then tighten the fan grill locking screw and nut. (Fig. 7)
Operating instruction
-
Speed control Speed is controlled by the piano switch: 0—Off 1—Low 2—Medium 3—High
-
Automatic 120-minute timer
Turn the knob of time switch to the right and set the time, the timer switch is cut at the time within 120 minutes. In case the time switch is not use, set the time switch to “On”. -
Oscillation control
To make the fan oscillate, press the clutch knob located on the top of the motor housing. To get the directional airflow, pull the clutch knob up to its initial position. -
Tilt adjustment
To adjust the air flow upward or downward, push the grilles lightly to the desired direction. -
Height adjustment
The height of the fan can be adjusted by loosening the height adjustment ring carefully raising or lowering the fan and firmly re-tightening the height adjustment ring.
Other
6.1 Maintenance instruction
The fan requires little maintenance. Do not try to fix it by yourself. Refer
it to qualified service personnel if service is needed.
- Before cleaning and assembling, fan must be unplugged.
- To ensure adequate air circulation to the motor, keep vents at the rear of the motor free of dust. Do not disassemble the fan to remove dust.
- Please wipe the exterior parts with a soft cloth soaking a mild detergent.
- Do not use any abrasive detergent or solvents to avoid scratching the surface. Do not use any of the following as a cleaner: gasoline, thinner.
- Do not allow water or any other liquid into the motor housing or interior parts.
6.2 Cleaning
- Be sure to unplug from the electrical supply source before cleaning.
- Plastic parts should be cleaned with a soft cloth moisten with mild soap. Thoroughly remove soap film with dry cloth.
6.3 Technical data
Power supply: 220V-240V, 50Hz
Technical and design modifications reserved.
Disposal
Note: This symbol indicates that this product shall not be disposed with other household wastes at the end of its service life. Used device must be returned to official collection point for recycling of electrical and electronic devices. To find these collection systems please contact to your local authorities or retailer where theproduct was purchased. Each household performs important role in recovering and recycling of old appliance. Appropriate disposal of used appliance helps prevent potential negative consequences for the environment and human health.
Information
Description| Symbol| Value| Unit
Maximum fan flow rate| F| 55.| m3/min
Fan power input| P| 50| W
Service value| SV| 1.| (m3/min)/W
Standby power consumption| PSB| 0| W
Fan sound power level| LWA| 63| dB(A)
Maximum air velocity| C| 2,83| meters/sec
Measurement standard for service value| IEC 60879:1986+ (corr, 1992)
Contact details for obtaining more information| Manufactured by Arcelik AS,
Karaagac Cd, No:2-6 34445 Sutluce, Beyoglu, Istanbul, Turkey
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>