NXP ADTJA1101-RMII TJA1101 Adapter Card User Guide

Table of Contents

NXP-ADTJA1101-RMII-TJA1101-Adapter-Card

Get additional documentation for

from NXP’s document repository

SABRE = Smart Application Blueprint for Rapid Engineering
Accelerate your time to market with our premiere series of market-focused development systems based on application controllers: Smart Application Blueprint for Rapid Engineering (SABRE). SABRE platforms deliver the advanced technology features required for next-generation automotive systems.

The ADTJA1101-RMII is a daughter card carrying NXP’s TJA1101 100BASE-T1 Ethernet PHY
It adapts to micro controller development boards with SABRE connector, e.g. S32K148EVB
The full TJA110x driver set is supported by the S32K148EVB SDK.

How to connect the SABRE enabled Boards

Power input options:

For Jumper Settings please refer to S32K148EVB Quick Start Guide NXP-
ADTJA1101-RMII-TJA1101-Adapter-Card-4

NXP-ADTJA1101-RMII-TJA1101-Adapter-
Card-5

For configuration options of TJA1101 please refer to product data sheet

NXP-ADTJA1101-RMII-TJA1101-Adapter-
Card-6

TJA110x driver pre-integration with S32K SDK

Production grade driver support is pre-integrated with SDKs for NXP microcontrollers
GUI configuration support in S32 Design Studio IDE see screenshot
Supports TJA1100, TJA1101 and TJA1102(S)
Support for generic PHY devices using IEEE registers
Currently supported by:
- S32K SDK v0.8.6
- MPC574x SDK v0.9.0
- i.MX8 SDK (planned)

Single Linux driver for TJA110x
Integrates into Linux’ PHY Abstraction Layer (PAL)
Extended with automotive features
- Support for Managed and Autonomous Mode
- Master/Slave configuration
- Cable Test
- LED, Loopback and Test Modes
- Sleep and Wakeup
Implements polling of interrupt status register
Warning about and reaction to failure conditions
Download here
FAQ here

ADTJA1101-RMII Compatible Controller Boards

S32K148EVB: S32K148 Evaluation Board
Low-cost evaluation platform and development system for quick application prototyping with the S32K148 MCU belonging to the S32K series of Ultra-Reliable Microcontrollers (MCUs).
i.MX8 (board to be released soon)

NXP Link Partner Boards for 100BASE-T1 System Setup

SJA1105SMBEVM: Gateway Prototyping Platform
Enables early SW development for SJA1105P/Q/R/S Automotive Ethernet switch family and the TJA1102 Automotive Ethernet PHYs on a market-leading Automotive MPC5748xG MCU.
SJA1105Q-EVB: Ethernet Switch & PHY Evaluation Board
An evaluation system that supports the SJA1105P/Q/R/S Automotive Ethernet switch family in conjunction with the TJA1102HN Ethernet PHY Transceiver.
OM14500/TJA1101: 100BASE-T1 PHY Evaluation Board
Low-cost hardware development tool which supports the functional evaluation of the 100BASE-T1 PHY transceiver TJA1101.
FibreCode FC602 USB OABR Stick:
The FC602 USB OABR Stick functions as seamless media converter between a standard USB 2.0 interface and an automotive Ethernet network. On Windows and Linux host PCs the USB OABR Stick is detected as standard Ethernet device.

ADTJA1101-RMII Connected System Examples