NXP LPC55S36-EVK Development Board User Guide

Table of Contents

NXP-LPC55S36-EVK-Development-Board-PRODUCT-IMAGE

Specifications

Model: LPC55S36-EVK/LPC5536-EVK
Features: Audio In/Out, Motor Connections, CAN, SWD, USB ports, Ext. Codec, Reset, User and Wake-Up buttons, UART, mikro BUS, RGB LED
Manufacturer: NXP
Document Number: LPC55S3x REV 1
Agile Number: 926-79042 REV B

Getting Started

Connect the evaluation board to a PC using the included micro-USB cable to USB connector J1. LED D5 will turn ON when powered up.
The LPC55S3x board comes preprogrammed with a demo that blink each RGB LED three times. Pressing SW1 turns on the RED LED, and pressing SW3 turns on the GREEN LED. Connecting a micro-USB cable to J3 will enumerate a USB mouse device.
For more information on running the demo, accessing additional examples, and downloading software and tools, visit: www.nxp.com/LPC55S3x/startnow.

Support and Warranty

For support, visit : www.nxp.com/support for a list of phone numbers within your region.
For warranty information, vis it: www.nxp.com/warranty.

Get Started
Download installation software and documentation at: www.nxp.com/LPC55S3x

Authorized Distributor
Mouser Electronics is an authorized distributor. Click to view pricing, inventory, delivery & lifecycle information for:

FAQ

Q: Where can I find additional resources for the LPC55S36-EVK/LPC5536-EVK?
A: For additional resources, including software downloads and examples, visit the official NXP website at www.nxp.com/LPC55S3x/startnow.

QUICK START GUIDE
LPC55S36-EVK/LPC5536-EVK

LPC55S36-EVK/LPC5536-EVK

Evaluation kit supports

LPC553x/S3x MCU
Arm® / Cortex®-M33
150 MHz Arm® Cortex®-M33
Floating Point Unit (FPU) and Memory Protection Unit (MPU)
Up to 256 KB on-chip flash program memory
Up to 128 KB total SRAM
TrustZone® technology, Crypto Subsystem (CSS), Public Key Cryptography (PKC) among other security elements

$NXP-LPC55S36-EVK-Development-Board- $1$$

Connect the evaluation board to a PC using the included micro-USB cable to USB connector J1. When the board is powered up, LED D5 turns ON.
The LPC55S3x board comes preprogrammed with a demo that will blink each RGB LED three times. In addition, pressing SW1 will turn on the RED LED and pressing SW3 will turn on the GREEN LED. Connecting a micro-USB cable to J3 will enumerate a USB mouse device.
For more information on running the demo, access to additional examples and to download software and tools, please visit: www.nxp.com/LPC55S3x/startnow.
- SUPPORT
  Visit www.nxp.com/support for a list of phone numbers within your region.
- WARRANTY
  Visit www.nxp.com/warranty for complete warranty information.

GET STARTED

Download installation software and documentation at www.nxp.com/LPC55S3x
www.nxp.com/LPC55S36-EVK
NXP and the NXP logo are trademarks of NXP B.V. All other product or service names are the property of their respective owners. © 2023 NXP B.V.
Document Number: LPC55S3x REV 1 Agile Number: 926-79042 REV B