FREEDOM Pergola Side Wall Kit Instruction Manual

FREEDOM Pergola Side Wall Kit Instruction Manual

WARNING:

• Improper installation of this product can result in personal injury. Always wear safety goggles when assembling the product.
• Incorrect installation may cause harm to the product or individual.

NOTICE:

• DO NOT attempt to assemble the kit if parts are missing or damaged.
• DO NOT return the product to the store, for assistance or replacement parts call: 1-888-418-4400

BEFORE YOU BEGIN

Check your local zoning laws.

• Local zoning laws and Home Owners Associations may regulate the location, style and height of your product or even require a permit signoff beforehand.

NOTE:

• Side wall is to be installed on corresponding Pergola assembly (sold separately)
• Side wall can only be installed on opposing shorter sides of Pergola assembly.

TOOLS/MATERIALS NEEDED

• Drill
• Level
• Pencil
• Tape Measure
• Rubber Mallet

SOLD SEPARATELY:

• (4) Decorative screen panels (for infill)
• 8×8 Pergola

Pergola Kit Components

QTY.|

Description

---|---

2

| U-Channels – “A”
1|

H-Channel for mid-rail – “B

2

| Vertical H-Channels (short) – “C”
4|

Large Side Wall Brackets – “D”

2

| Small Side Wall Brackets – “E”
12|

Large post attachment screws – “F”

6

| Small Bracket attachment screws – “G”
1|

Hex Head driver bit – “H”

Assembly Instructions

1. Determine desired height of assembly on post.
   NOTE:
   The side wall can only be installed on shorter side(s) of the pergola.

2. Attach large side brackets to either side of U-channel for bottom rail using small attachment screws (one per side). Opening of rail should be facing up (Fig. 1).
   
   

3. Install bottom U-channel to both post faces using the large attachment screws (two per side) (Fig. 2).
   
   

4. Insert (2) Decorative screen panels into bottom rail. Insert one vertical H channel in-between panels (Figs. 3 & 4).
   
   

5. Repeat step 2 for mid-rail by attaching small side brackets to either side of H-channel for mid-rail using small attachment screws (one per side).

6. Install H-channel over decorative screen panels & attach to face of post using the large attachment screws (Figs. 5 & 6)
   
   

7. Repeat step 4 for additional two panels & vertical rail (Fig. 7 & 8)
   
   
   

8. Attach large side brackets to either side of U-channel for top rail using small attachment screws (one per side). Opening of rail should be facing down.

9. Install top u-channel to both post faces using the large attachment screws (two per side) (Figs. 9 & 10).
   
   
   

Support

Barrette Outdoor Living
7830 Freeway Circle, Middleburg Heights, OH 44130
freedomproduct.com
888-418-4400

References

• Barrette Outdoor Living: HomePage
• Fencing, Railing & Accents - Freedom Outdoor Living for Lowes
• Freedomproduct.com/warranty

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>