AQUABATOS CANNES Serie Shower Cubicle Corner Entry Instruction Manual
- June 3, 2024
- AQUABATOS
Table of Contents
CANNES Serie Shower Cubicle Corner Entry
Instruction Manual
CANNES Serie Shower Cubicle Corner Entry
Prior to installation please carefully examine shower enclosure for transport
or other damage. Thorough examination of all glass parts is essential for your
own safety. Seemingly minor damage may cause breakage of glass and for this
reason, extra care must be taken not to damage the glass edges of the shower
enclosure during installation or use of the shower enclosure. Claims for
transport damage after installation and claims for damage or cost caused by
incorrect installation, cleaning and maintenance will not be paid. Personal
protective equipment recommended!
Shower enclosures are intended for installation on shower trays. If installing
without a shower tray, the floor on which the shower enclosure will rest must
be flat and level.
If installing on a joint or uneven surface, you must ensure this is properly
silicone to form a waterproof and maintenance-free seal. When assembled off-
floor or with a step, you must take appropriate measures to prevent slip
hazards on entry and exit. Before drilling the raw plug holes, the wall has to
be tested for concealed service pipes (electricity-, gas- or water pipes).
Drilling into these pipes is a life threatening hazard as well as damage to
property. Shower enclosures should be installed on solid walls and bases. If
installing on non-solid walls and bases, you must ensure appropriate stability
on site (e.g. by using special raw plugs). Please use adequate and correct
silicone appropriate for the installation (e.g. for marble)
TOOL LIST
ASSEMBLY INSTRUCTIONS
(1) 2x wall profile cover cap
(2) 2x wall profile
(3) 6x dowels
(4) 6x round head screw ST 4×30
(5) 6x screw cover cap
(6) 6x round head screw ST 4×12
(7) 6x screw cap terminals
(8) 2x Movable Plate
(1) 2x wall profile cover cap
(2) 2x wall profile
(3) 6x dowels
(4) 6x round head screw ST 4×30
(5) 6x screw cover cap
(6) 6x round head screw ST 4×12
(7) 6x screw cap terminals
(8) 2x Movable Plate| (9) 2x handle
(10) 2x Magnetic Gasket
(11) 2x wood spacers
(12) 2x bottom seal
(13) 2x End Cover A L&R
(14) 2x drip tray
(15) 1x End Cover B
(16) 1x End Cover C
(9) 2x handle
(10) 2x Magnetic Gasket
(11) 2x wood spacers
(12) 2x bottom seal
(13) 2x End Cover A L&R
( 14) 2x drip tray
(15) 1x End Cover B
(16) 1x End Cover C
---|---
INSTALLATION GUIDE
If you need assistance, we recommend that you contact a competent
Contact plumber.
Step 1
Step 2
A
Shower trays installation dimension shower trays installation dimensions|
B
Shower cubicles installation dimension shower cubicles installation dimensions
---|---
68,5 – 70 cm| 67,5 – 69 cm
73,5 – 75 cm| 72,5 – 74 cm
78,5 – 80 cm| 77,5 – 79 cm
88,5 – 90 cm| 87,5 – 89 cm
98,5 – 100 cm| 97,5 – 99 cm
Aqua Batos B~der GmbH
S~dwestkorso 14
12161 Berlin
info@aquabatos.com
www.aquabatos.de
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>