PHILIPS BDP100 TownGuide Performer Owner’s Manual
- June 1, 2024
- Philips
Table of Contents
PHILIPS BDP100 TownGuide Performer
INTRODUCTION
TOWN GUIDE PERF FLAT CONE, LED module 6000 lm, Distribution wide, Polycarbonate bowl/cover clear, LumiStep dimming 6 hours, Post-top for diameter 62 mm The TownGuide Performer family consists of six recognizable, yet modern shapes: Flat Cone, Bowl, Classic Cone, Classic T, T and Tzero. Each luminaire has the option of a clear (PCC), translucent (PCTR) or frosted (PCF) bowl (except Tzero, which is only available with a clear bowl). With an extensive range of lumen packages, neutral white or warm white LED lights sources, and a range of dedicated optics for lower mounting heights, it’s easy to select the version that best suits the specific requirements of your project. All this is combined with a long life expectancy of 100,000 operating hours. In addition, TownGuide Performer has a variety of control system options that can make this luminaire an integral part of smart energy reduction programs. This includes LumiStep, DynaDimmer, LineSwitch standalone dim control, and Coded Mains group control, right up to seamless remote connectivity with Interact lighting management software. Installation is easy. Thanks to the bayonet whistle connector with an integrated gland located in the spigot, there’s no need to open the luminaire for installation. The Signify Service tag app offers direct access to all relevant data, ensuring maintenance is easy too. Philips has made every effort to make the Total Cost of Ownership (TCO) of the luminaire as attractive as possible. And as TownGuide Performer is a dedicated LED luminaire, compatible with a variety of control systems, there are significant energy and maintenance cost savings compared with conventional lighting.
Product data
General Information
- Lamp family code LED60 [LED module 6000 lm]
- Light source replaceable Yes
- Number of gear units 1 unit
- Driver included Yes
- Photocell –
TownGuide Performer
- Light source engine type LED
- Service tag Yes
- Product family code BDP100 [TOWNGUIDE PERF FLAT CONE]
- Lighting Technology LED
- Value ladder Performance
- Embedded control LumiStep dimming 6 hours
- CE mark Yes
- Warranty period 5 years
- Flammability mark –
- ENEC mark ENEC mark
- Glow-wire test Temperature 650 °C, duration 5 s
- EU RoHS compliant Yes
- Serviceability class Class A, luminaire is equipped with serviceable parts (when applicable): LED board, driver, control units, surge protection device, optics, front cover and mechanical parts
Light Technical
- Upward light output ratio 3
- Luminous Flux 4,500 lm
- Standard tilt angle post top 0°
- Standard tilt angle side entry –
- Correlated Color Temperature (Nom) 3000 K
- Luminous Efficacy (rated) (Nom) 96 lm/W
- Color rendering index (CRI) 80
- Number of light sources 4
- Light source color 830 warm white
- Optical cover type Polycarbonate bowl/cover clear
- Luminaire light beam spread 50° x 70°
- Optic-type outdoor Distribution wide
Operating and Electrical
- Input Voltage 220-240 V
- Line Frequency 50 to 60 Hz
- Inrush current 45 A
- Inrush time 0.285 ms
- Power Consumption 47 W
- Power Factor (Fraction) 0.97
- Connection Screw connection block 5-pole
- Cable –
- Number of products on MCB of 16 A type B 10
Temperature
- Ambient temperature range -40 to +35 °C
Controls and Dimming
- Dimmable Yes
- Driver/power unit/transformer Power supply unit with DynaDimmer
- Control interface –
- Constant light output No
Mechanical and Housing
- Housing Material Aluminum
- Reflector material –
- Optic material Acrylate
- Optical cover material Polycarbonate
- Fixation material Steel
- Housing Color Silver
- Mounting device Post-top for diameter 62 mm
- Optical cover shape Conical flat
- Optical cover finish Clear
- Overall length 570 mm
- Overall width 570 mm
- Overall height 209 mm
- Overall diameter 570 mm
- Effective projected area 0.051 m²
- Dimensions (Height x Width x Depth) 209 x 570 x 570 mm
- Parts color All parts colored
Approval and Application
- Ingress protection code IP66 [Dust penetration-protected, jet-proof]
- Mech. impact protection code IK10 [20 J vandal-resistant]
- Surge Protection (Common/Differential) Luminaire surge protection level until 6 kV differential mode and 6 kV common mode
- Sustainability rating Lighting for circularity
- Protection class IEC Safety class II
Initial Performance (IEC Compliant)
- Luminous flux tolerance +/-7%
- Initial chromaticity (0.43, 0.40) SDCM <5
- Power consumption tolerance +/-10%
- Init. Color Rendering Index Tolerance +/-2
Over Time Performance (IEC Compliant)
- Driver failure rate at 5000 h 0.5 %
- Control gear failure rate at median useful life 100000 h 10 %
- *Lumen maintenance at median useful life 100000 h** 94
Application Conditions
- Performance ambient temperature Tq 25 °C
- Maximum dim level 50%
Product Data
- Order product name BDP100 LED60/830 II DW PCC SI LS-6 62P
- Full product name BDP100 LED60/830 II DW PCC SI LS-6 62P
- Full product code 871829191010700
- Order code 910500991070
- Material Nr. (12NC) 910500991070
- Numerator – Quantity Per Pack 1
- EAN/UPC – Product/Case 8718291910107
- Numerator – Packs per outer box 1
- EAN/UPC – Case 8718291910107
Dimensional drawing
2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
- www.lighting.philips.com
- 2024, March 14 – data subject to change