SIIG CE-H25411-S2 HDMI Video Wall Over IP Multicast System Controller User Manual

HDMI Video Wall Over IP Multicast System
Controller
User Manual

04-1215B

P/N: CE-H25411-S2

Safety and Notice

The device has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment, the device should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.

• Follow all instructions and warnings marked on this unit.
• Do not attempt to service this unit yourself, except where explained in this manual.
• Provide proper ventilation and air circulation and do not use near water.
• Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.
• Use only the power adapter and power cords and connection cables designed for this unit.
• Do not use liquid or aerosol cleaners to clean this unit.
• Always unplug the power to the device before cleaning.

Features

• Control center of the IP-based Transmitter and Receiver (CE-H28A11-S1, CE-H27F11-S1 & CE-H27G11-S1)
• Monitors all devices in one central system
• Cost effective solution for loT
• Intuitive and powerful user interface
• Includes Web interface and mobile support
• Easy installation with auto-detection of transmitter and receiver units in the network.
• Drag-and-drop easy matrix switching
• Easy to create multiple video walls
• Schedule time for audio/video mapping, cycle-play and mute/resume
• Allows to create custom OSD
• Watch-dog with self-recovery
• Assigns the video sources for each display with account/password submit Supports video wall function
• Supports video wall function

Package contents

• HDMI Video Wall Over IP Multicast System Controller
• Power adapter DC 5V / 0.85A
• Rack-mounting ear set
• User Manual

Layout

1. Output: HDMI output, it displays the information of controller
2. RJ-45: Ethernet control port
3. USB: Reserved
4. Activity LED indicator: When the storage device is being used, the light will blink
5. Power LED indicator: When unit connect a power supply unit, the light will shine
6. Power jack: Connect to DC 5V/1A power adapter

Application

OPERATION

Installation Setup

1. Connect the PC & controller into the Gigabit IP Switch/ Router
2. Connect controller HDMI output to display. The display will show information, as below image. (Default DHCP Enable)
3. Open browser and type in controller’s IP or type http://astpi3 will into WEB control page.
   (*Default Account/Password are admin/admin)

http://astpi3

Mapping

On this Page, you can see runtime status of all TX/ RX device in controller. The way to do input/output mapping is to drag TX icon to RX icon. It also pro- vides 10 profile spaces to save the frequently used scenarios into the device. Clicking the profile button to preview the saved scenarios.

Video wall

1. Video Wall Option The method of setup the video wall is to do input/ output mapping on the Mapping page, and then select RX in the RX list of the Video Wall page to set the layout.
2. Bezel and Gap Compensation Set the bezel and gap of the RX video wall to achieve seamless splicing of display screens. After completing the settings, click the “Apply” button to enable the bezel and gap Compensation.
   • OW: outside width
   • OH: outside height
   • VW: viewable width
   • VH: viewable height

• VW must be less than OW and VH must be less than OH.

• The field may not be blank, if users do not need this function, please set all values to 1.

• The value must be an integer.

  3. Wall Size & Position Layout Set the layout to split the video into multiple zones.
     Then set the row position and column position to select video zone to output. After completing the settings, click the button to enable the video wall.

OSD

There 8 custom OSD windows for users to input the texts or images to be shown with the video. User can click the button to upload photos (only accept png or jpg files). Also click the button to adjust the message text, photo, transparency, position, color and size. After setting, please drag the OSD window to RX window which you want to show the desired text or image.

Setup

After connecting the HDMI over IP transmitter and receiver units to the Router/Ethernet Hub, the controller will automatically add the device into the control system.
*You can click the blink LED button to search corresponding transmitter/receiver device.

TX

RX

Password

Sysconfig

FW update

History

Dear Valued Customer
WE REALLY APPRECIATE YOUR PURCHASE
thank you–
Support
For more info or tech support http://www.siig.com/support
Nov, 2022 Copyright @ 2022 by SIIG, Inc. All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>