SIIG 2C1A 100W GaN PD Combo Charger User Guide
- October 30, 2023
- SIIG
Table of Contents
SIIG 2C1A 100W GaN PD Combo Charger
Features
- New Gallium Nitride (GaN) semiconductor material
- AC input 100-240V, 50/60Hz, 1.SA
- 3 ports total output 100W max
- USB-C ports supports PD 3.0, PPS,
- up to 1 00W max
- USB-A Ports supports QC 3.0
- up to 30W max
- Over-load, Over-voltage, Over-current, Over Heating and Short circuit protection. UL Certification E533290
Package contents
- 1 00W GaN PD Combo Charger – 2C1 A
- Quick Start Guide
Layout
- USB-C PD Output 1:
- 100W max 5V/3A, 9V /3A, 12V/3A, 15V /3A,20V/5A
- USB-C PD Output 2:
- 100W max 5V/3A, 9V /3A, 12V/3A, 15V /3A,20V/5A
- USB-A QC3.0 Output:
- 30W max 5V/4.5A, 9V/3A, 12V/2.5A,20V/1.5A
Multiport Charging Rules
- Every ports will have different output limit when multi-port charging at the same time, let every ports can get proper power to charge devices to avoid over loading.
Single port used
- USB-C1 /C2 Output: 1 00W
- USB-A Output: 30W
Dual ports used
- USB-C1 +USB-C2 Output: 65W+ 35W
- USB-C1 +USB-A Output: 65W+ 30W
- USB-C2+USB-A Output: 65W+30W
Triple ports used
- USB-C1 +USB-C2+USB-A Output:
- 45W+35W+18W
Note:
- If without loading, its internal consumption is about <300mW.
- Always Unplug the Charger from the power source when not in use
- DO NOT place the Charger on heated surface or next to other heat sources
- DO NOT attempt to replace any parts or open the case of the Charger, opening the case can cause personal injury due to electrical hazard and will void the manufacturer warranty
- DO NOT expose the Charger to liquids or excessive heat
- DO NOT use corrosive cleaning substances on the Charger Keep out of the reach of children
- For optimal charging speed, we recommend using your device’s original equipment USB charging cable.
Support
For more info or tech support http://www.siig.com/support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>