SIIG CE-MT3Y11-S1 Dual Monitor Gas Spring Arm Installation Guide
- June 1, 2024
- SIIG
Table of Contents
SIIG CE-MT3Y11-S1 Dual Monitor Gas Spring Arm
Parts List
Installation
- a. C-Clamp Mounting Option
- b. Grommet Mounting Option
- Base Installation
- Arm Installation
- VESA Plate Installation
- Display installation
- Tension Adjustment
To properly balance the arm with monitors mounted, adjust the spring tension using the supplied Allen Key as the picture shows - Pay attention while the clamp is installed!
- Note: If the display does not stop at your desired position, tighten the screws as shown
Contact Us
For more info or tech support http://www.siig.com/support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>