WIDEX WPT103 MRR4D Charger User Guide
- June 3, 2024
- WIDEX
Table of Contents
CHARGER
WIDEX MRR4D CHARGER
WPT103
MAIN FEATURES
- Compact and portable.
- Can be powered from multiple power sources.
- Intuitive use supported by light indicators displaying charge level of the hearing aid.
DESCRIPTION
The WIDEX sRIC charger is designed to charge two WIDEX MRR4D hearing aids.
The charger has a charging well for each hearing aid, and two light indicators
that show the charging status of the individual hearing aid.
Each hearing aid can be charged individually, depending on the state of charge
of the hearing aid. This means that if one hearing aid is fully charged and
placed in the charger, it will not charge. However, if the other hearing aid
is not charged, it will charge.
PROPERTIES
| Colour: | Black and warm platinum (metallic) |
|---|---|
| Dimensions: | Height: 51mm |
Width: 77mm
Depth: 27 mm
Weight:| approx. 85 g
Capacity:| Holds a set of hearing aids. Can charge the hearing aids
individually.
Charging time and indications see Instruction for Use for the WIDEX MRR4D
Charger
Operating temperature, humidity and atmospheric pressure ranges:| 0°C (32°F)
to 30°C (86°F), 10%-95% rH and 750 to 1060 mbar.
Storage and transportation:| -20°C (-4°F) to 50°C (122°F), 10%-95% rH and 750
to 1060 mbar
POWER SUPPLY
Input| Type: DC, stabilized 5V +/- 5%
Min current: 500 mA
Connector: micro USB receptacle
Different power supplies can be used (see User Instructions). The hearing aid
can become warm during charging.
---|---
DISPOSAL
- Do not dispose of the charger (new or used) along with ordinary household waste.
- The charger must be disposed of as electronic or chemical waste, according to local regulations.
The Charger at a glance
The charger has a charging well for each hearing aid, and two light indicators
that show the charging status of the hearing aids.
- Micro USB port
- Charging wells
- Light indicators
IN THE BOX
In the presentation box you will find:
- One charger
- One power adaptor
- One USB cable
- User instructions