CTEK Time To Go Battery Charger Instruction Manual
- June 3, 2024
- CTEK
Table of Contents
CTEK Time To Go Battery Charger
TIME TO GO
User instruction battery charger
Read safety instruction
- More than X hours of charge time left
- Battery ready to use
- Fully charge/maintenance charge
- Battery ready to crank once
Error lamp
See FAQ, www.ctek.com
Included in package
Power lamp
TECHNICAL SPECIFICATIONS
Model number| 1075
Input| 220–240VAC, 50–60Hz, 0.6A
Output| NORMAL 14.4V, AGM
14.7V, RECOND 15.8V,
5.0A max
Back current drain| Less than 1.5Ah/month
Ambient temperature| -20°C to +50°C
Battery types| 12V Pb WET MF
GEL AGM CA/CA
Battery capacity| 20–160Ah
Insulation class| IP65
Warranty| 5 years
Temperature Compensation| Built in charge voltage compensation according to
ambient temperature.
) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers has a very low back current.
LIMITED WARRANTY
CTEK, issues this limited warranty to the original purchaser of this product.
This limited warranty is not transferable. The warranty applies to
manufacturing faults and material defects.
The customer must return the product together with the receipt of purchase to
the point of purchase.
This warranty is void if the battery charger has been opened, handled
carelessly or repaired by anyone other than CTEK or its authorized
representatives. CTEK makes no warranty other than this limited warranty and
is not liable for any other costs other than those mentioned above, i.e. no
consequential damages. Moreover, CTEK is not obligated to any other warranty
other than this warranty.
SUPPORT
Fore support, FAQ, latest revised manual and more information about CTEK
products: www.ctek.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>