CTEK CS ONE Motorcycle And Car Battery Charger User Manual
- June 1, 2024
- CTEK
Table of Contents
CTEK CS ONE Motorcycle And Car Battery Charger
Specifications
- Part No: 40-333, 40-334, 40-335
- Adaptive Charging Technology: APTOTM
- Compatible with: All types of 12V lead-acid batteries
- Features: RECOND, WAKE UP, SUPPLY, ADVANCED SETTINGS
- Material: Plastic, Composite, Paper
- IP-class: IPX4 (for outdoor use)
Product Usage Instructions
About the CS ONE The CS ONE is a revolutionary adaptive battery charger and maintainer featuring APTOTM technology. It is designed to prolong battery life and ensure optimal performance.
Features
- RECOND option for lead-acid battery restoration
- WAKE-UP option for reviving lithium and lead-acid batteries
- SUPPLY mode for supporting the battery during service work
- ADVANCED SETTINGS for monitoring charger voltage & amperage
What’s in the Box The package includes a CS ONE unit, charge clamps, cable tie, user manual, and gift box. Packaging materials used include transparent film, paper, and cardboard.
Safety & RecyclingIt is important to read all safety and user instructions before using the charger.
Some key safety points:
- Use the charger only for its intended purpose.
- Follow battery manufacturers’ recommendations.
- Avoid charging non-rechargeable batteries.
- Do not charge frozen or damaged batteries.
- Ensure cables are not damaged and replace them if necessary.
- Chargers with IP-class lower than IPX4 are for indoor use only.
FAQ
Q: Can the CS ONE be used with all types of lead-acid batteries?
A: Yes, the CS ONE is compatible with all types of 12V lead-acid batteries.
Q: How do I access the advanced settings to monitor charger voltage & amperage?
A: You can access the advanced settings through the CTEK App provided with the charger.
Q: Is it safe to leave the CS ONE charging unattended?
A: It is recommended not to leave the charger unattended during charging for safety reasons.
THANK YOU FOR CHOOSING CTEK
- CTEK was founded in 1997 and since then we’ve been developing and manufacturing high-quality battery chargers with unique cutting-edge technology, for all types of lead-acid batteries.
- Why? Because a battery can last 2-3 times longer if you maintain and charge it properly. This benefits the environment, saves people a lot of money, and makes vehicles more reliable.
- To learn more about us and our products, please visit: www.ctek.com
ABOUT THE CS ONE
REVOLUTIONARY ADAPTIVE BATTERY CHARGER AND MAINTAINER
- The revolutionary battery charger and intelligent maintainer with APTO™ (Adaptive Charging) technology.
- Hands down the most innovative battery charger ever engineered by CTEK, CS ONE comes to you with cutting-edge APTO™ technology that’s so advanced it does all the thinking for you.
- This is the ONE battery charger capable of delivering a whole new dimension of smartness and simplicity. ONE so ground-breaking, it supports polarity-free charging. ONE you simply plug into the mains, attach to any 12 V battery, and rely on to deliver consistently optimal performance.
- We call that pure brain power, wouldn’t you?
FEATURES
- Fully automatic APTO™ (Adaptive Charging) Technology, for every type of 12 V lead-acid (WET, MF, Ca/Ca, AGM, EFB, GEL) or 12 V lithium (LiFePO4) battery
- Groundbraking polarity-free clamps that can be safely connected to either charging point. This charger cannot be connected incorrectly
- Easy to use, easy to operate – no buttons to press or modes to select – unless you want to
- A clear, bright display shows you how long is left in hours until the battery is charged and ready to go Can be left safely connected for long periods during maintenance charging
- New durable design to make it easy to handle, with a unique mounting system on the back for quick connection to CS accessories 5 year warranty
- Additional advanced functions (RECOND, WAKE UP, SUPPLY & advanced settings) available via Bluetooth® connection and the CTEK App:
- RECOND option to restore and recondition lead-acid batteries.
- WAKE UP option to revive seemingly dead lithium and lead-acid batteries.
- SUPPLY to support the battery during service work and retain contact power to the vehicle during battery replacement/removal.
- ADVANCED SETTINGS to monitor charger voltage & amperage.
WHAT’S IN THE BOX
NO.| ITEM| PACKAGING MATERIAL USED**| CODE OF MATERIAL|
MATERIAL CATEGORY
---|---|---|---|---
1| CS ONE| Transparent film| PP5| Plastics
2| Charge clamps| Cable tie| 92| Composite
3| User manual| Paper| PAP22| Paper
4| Gift box| Cardboard| PAP20| Paper
- Supply plugs may differ to suit your wall socket
- Packaging elements may vary subject to the model
- Check the provision of your municipality for the management of waste
TUTORIALS
Scan the QR code below with your phone’s camera to see the CS ONE tutorials. CTEK.COM/MEDIA/CSONE
SAFETY & RECYCLING
READ ALL OF THE SAFETY AND USER INSTRUCTIONS BEFORE USE
- The charger is only designed for charging batteries according to the technical specifications. Do not use the charger for any other purpose
- Always follow battery manufacturers’ user and safety recommendations
- Never try to charge non-rechargeable batteries
- Never place the charger on top of the battery or cover the charger when charging
- Never charge a frozen or damaged battery
- Never use a charger with damaged cables. Ensure that the cables have not been damaged by hot surfaces, sharp edges, or in any other way
- A damaged cable must be replaced by a CTEK representative using an original part supplied by CTEK. A detachable cable can be replaced by the user using an original part supplied by CTEK
- Never extend the charger cable to a total length of more than 3.0m. Use only original parts supplied by CTEK
- Extension of the output cable may cause electromagnetic interference
- Connection to the mains supply must be under the national regulations for electrical installations
- Chargers with grounded mains plug must only be connected to a grounded socket outlet
- During charging, lead-acid batteries can emit explosive gases. Prevent sparks close to the battery. Provide for good ventilation
- Chargers with IP-class lower than IPX4 are designed for indoor use. See technical specification. Do not expose to rain or snow
- For batteries mounted inside a vehicle, connect the charger to the battery’s positive pole and then to the vehicle chassis remote from the fuel pipe. Then connect the charger to the mains supply
- Disconnect the charger from the main supply. Next, remove the negative connection (vehicle chassis) and then the positive connection.
- Don’t leave any battery unattended for a longer time during charging. If any error occurs disconnect the charger manually
- (IEC 7.12 ed.5) This text is applicable outside European Countries: This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance
- (EN 7.12) This text is applicable in European Countries: This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be made by children without supervision
DISPOSING OF THE DEVICE YOUR OBLIGATION AS AN END-USER
- Products marked with a crossed-out wheeled bin symbol and a single black bar underneath, contain parts that must be handled in compliance with the WEEE Directive (2012/19/EU.
- The appliance may therefore only be collected and taken back separately from unsorted municipal waste, i.e. it must not be disposed of with household waste.
- The appliance can, for example, be taken to a municipal collection point or, where applicable, to a distributor.
- This also applies to all components, sub-assemblies, and consumables of the old appliance to be disposed of.
- Before the old appliance can be disposed of, all old batteries and accumulators that are not enclosed in the old appliance must be separated from the old appliance.
- The same applies to lamps that can be removed from the old appliance without being destroyed. The end user is also responsible for deleting personal data from the old appliance.
NOTES ON RECYCLING
- Help to recycle all materials marked with this symbol. Do not dispose of such materials, especially packaging, in the household waste but in the recycling containers provided or in the appropriate local collection systems.
- Recycle electrical and electronic equipment for environmental and health protection.
OPERATING INSTRUCTIONS
CS ONE
- Connect the supplied battery terminal clamps to the CS ONE output port.
- Connect the battery clamps to the 12 V battery.
- The CS ONE has built-in polarity protection to prevent damage to your battery. The battery clamps can be safely installed at either terminal point.
- Note: Refer to the vehicle/battery manufacturer guide for terminal connection points.
- Plug the CS ONE into the supply outlet.
- APTO™ Technology will now analyze the condition of the battery to be charged.
- The LED indicator will cycle during this process.
- Note: If LED indicators ‘2’ & ‘>8’ are illuminated red, refer to the Troubleshooting section.
- APTO™ Technology automatically recognizes the type of battery, and then automatically delivers a customized charging program*.
- The charge time is shown on the LED indicator.
- Charging programs can include: ANALYZE, DESULPHATION (lead- acid only), WAKE UP, BULK, ABSORPTION, CARE
- Please read all of the instructions detailed in this user manual carefully before use.
- When the battery is fully charged, the CS ONE will automatically go into CARE mode and maintain a safe charge.
- The CARE mode is shown by all lights on the LED indicator pulsing.
- In CARE mode the battery is safe to be left on charge for long-term storage on or off the vehicle.
- Note: Check that CS ONE goes into CARE mode after 80 hours. If not, the battery could be faulty. CTEK recommends to get the battery tested – it may need replacing.
- Disconnect the CS ONE when the battery is ready for use.
- To disconnect, unplug the CS ONE from the supply outlet
- Follow by removing the CS ONE battery clamps
- Store the CS ONE in a suitable location
- CTEK APP
- Install the CTEK App
- Android – On the smart mobile device go to ‘Play Store’ → search ‘CTEK App’ → ‘Install’
- iOS – On the smart mobile device go to ‘App Store’ → search ‘CTEK App’ → ‘Get’ → ‘Install’
- Other operating systems – Refer to the smart mobile device manual to correctly select the App Store and install the CTEK App.
- Establish Bluetooth® connection:
- Android – Go to ‘Settings’ → ‘Connected Devices’ → ‘Connection preferences’ → ‘Bluetooth®’ → ‘Activate’
- iOS – Go to ‘Settings’ → ‘Bluetooth®’ → toggle to activate
- Other operating systems – Refer to the smart mobile device manual to correctly establish the Bluetooth® connection.
- Open the CTEK App
- Follow the instructions when prompted in the CTEK App to register an account
- Follow the instructions when prompted in the CTEK App to pair with the CS ONE
- Note: The CS ONE is ready for pairing for 2 minutes after being powered on. This can be indicated by the blue LED’s blinking.
ACCESSORIES
- A range of CTEK accessories can be used with the CS ONE as shown, visit www.ctek.com for more information and compatibility requirements.
- CS ONE BUMPER
- Part no. 40-476
- CS WALL MOUNT
- Part no. 40-375
- CTEK STORAGE CASE
- Part no. 40-517
- CS CONNECT ADAPTER CABLE
- Part no. 40-376
- CS CONNECT U-TERMINAL
- Part no. 40-377
- Requires CS
- CONNECT ADAPTER CABLE
TROUBLESHOOTING & FAQ
TECHNICAL SPECIFICATION
- MODEL NUMBER 1098
- INPUT 220–240 VAC, 47–63 Hz, 1.2 A
- OUTPUT 12 V, 8.0 A
- START VOLTAGE 1.5 V Lead-acid battery types | 1.5 V Lithium battery types
- **BACK CURRENT DRAIN*** Corresponding to less than 1.5 Ah/month
- RIPPLE** Less than 4 %
- AMBIENT OPERATING TEMPERATURE -30°C to +50°C (-22°F to +122°F)
- BATTERY CHEMISTRY Lead-acid, Lithium-ion
- BATTERY TYPES 12 V Lead-acid battery types: WET, MF, Ca/Ca, AGM, EFB, GEL | 12 V
- Lithium battery types: LiFePO4
- BATTERY CAPACITY 3–180 Ah
- INGRESS PROTECTION IP65
- TEMPERATURE COMPENSATION Built-in charge voltage compensation according to ambient temperature
- NET WEIGHT (UNIT WITH CABLES) 0.675 Kg (1.5 lbs)
- DIMENSIONS ( L X W X H) 235 x 88 x 52 mm (9.25 x 3.4 x 2 in)
- MAINS CABLE LENGTH (INPUT) 1.4 m (55 in)
- FREQUENCY BAND 2402 – 2480 MHz
- MAX. RF OUTPUT POWER (EIRP), BLUETOOTH® LOW ENERGY 5.93 dBm
- RF EXPOSURE (MAX. E-FIELD STRENGTH) 8.18 V/m (limit: 61 V/m)
- WARRANTY 5 years
- The back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
- The quality of the charging voltage and charging current is very important. A high current ripple heats the battery which has an aging effect on the positive electrode.
- High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.
LIMITED WARRANTY
- CTEK Sweden AB issues this limited warranty to the original purchaser of this product. This limited warranty is not transferable. The warranty applies to manufacturing faults and material defects for 5 years from the date of purchase.
- The customer must return the product together with the receipt of purchase to the point of purchase.
- This warranty is void if the battery charger has been opened, handled carelessly, or repaired by anyone other than CTEK Sweden AB or its authorized representatives.
- One of the screw holes in the bottom of the charger is sealed. Removing or damaging the seal will void the warranty.
- CTEK Sweden AB makes no warranty other than this limited warranty and is not liable for any costs other than those mentioned above, i.e. no consequential damages.
- Moreover, CTEK Sweden AB is not obligated to any warranty other than this warranty.
BLUETOOTH®
- The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth® SIG, Inc. and any use of such marks by CTEK is under license.
- Other trademarks and trade names are those of their respective owners.
SUPPORT
- CTEK offers professional customer support. Get in touch using one of the following.
- www.ctek.com
- support@ctek.com
- +46 10 344 88 10
- WWW.CTEK.COM
Documents / Resources
| CTEK
CS ONE Motorcycle And Car Battery
Charger
[pdf] User Manual
40-333, 40-334, 40-335, CS ONE Motorcycle And Car Battery Charger, CS ONE,
Motorcycle And Car Battery Charger, Car Battery Charger, Battery Charger,
Charger
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>