CTEK CS ONE Battery Charger and Maintainer User Manual
- June 5, 2024
- CTEK
Table of Contents
CTEK CS ONE Battery Charger and Maintainer
Package Content
Battery Connection
Cautions
TECHNICAL SPECIFICATIONS
| Model number | 1098 |
|---|---|
| Input | 220 to 240 VAC, 47 to 63 Hz, 1.2 A |
| Output | 12V 8A |
| Ambient temperature | -30 °C to +50 °C |
| Battery types | 12V WET, MF, Ca/Ca, AGM, EFB, GEL, LiFePO4 |
| Battery capacity | 3 to 180 Ah |
| Ingress protection | IP65 |
| Net weight (unit with cable) | 675 g |
| Dimensions | (L x W x H) 235 x 88 x 52 mm |
Bluetooth®
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. CTEK is licensed to use these marks. Other trademarks and trade names belong to their respective owners.
Limited Warranty
CTEK offers a limited warranty to the original purchaser of the product. The warranty period depends on the product. The Limited Warranty is not transferrable. This guarantee covers defects in workmanship and materials. This warranty is void if the product is misused handled or if repairs are not made by CTEK or an authorized representative were made. CTEK offers no warranty outside of this Limited Warranty and is not responsible for any costs other than those mentioned above, that is in particular not for consequential damages. In addition, CTEK is not liable for any further warranty services than those in obligated as specified in the guarantee statement.
Revisions
Changes to the product can lead to changes in the maintenance work. The descriptions and technical information in this manual correspond to those for time of printing. To be on the safe side, please pull the complete and up-to- date maintenance manual on our website.
Security
- The charger is only designed to charge batteries that comply with the technical specifications correspond to. The charger must not be used for any other purpose.
- Always follow the battery manufacturer’s operating instructions and safety instructions.
- Never attempt to charge non-rechargeable batteries.
- Never place chargers on top of the battery when charging. chargers when charging never cover.
- Never charge frozen or damaged batteries.
- Never use chargers with damaged cords. Make sure the cables don’t go through hot surfaces, sharp edges or damaged in any other way.
- Always set up fan-cooled products in such a way that no dirt, dust or similar is sucked in can be.
- Damaged cables must be replaced by a CTEK representative with original cables supplied by CTEK be replaced. Detachable cables can be replaced by the user with original cables supplied by CTEK be replaced.
- Never extend cables beyond a total length of 3.0 meters. To extend only Use original CTEK cable.
- Extending output cables may cause electromagnetic interference.
- The connection to the mains power supply must comply with the applicable specifications for correspond to electrical installations.
- Chargers with a grounding connection must be connected to a grounded outlet.
- Explosive gases can be produced when charging lead-acid batteries. sparking in Prevent battery proximity. Provide adequate ventilation.
- Chargers with a protection class of less than IPX4 may only be used indoors will. See the technical data. Protect the charger from rain and snow.
- Connect the charger first to the positive pole of the battery and then to the negative pole. Then connect the charger to the power supply.
- In the case of chargers installed in the vehicle, first connect the charger to the positive pole of the battery and then at a safe distance from the fuel line to the vehicle body. Then connect the charger to the power supply.
- Disconnect the charger from the mains power supply. Then first the negative pole (body) and then disconnect the positive pole.
- Do not leave batteries unattended for long periods while charging. When errors occur disconnect the charger by hand.
- (IEC 7.12 ED.5) This device is not intended for use by persons (including children) with physical or mental limitations or lack of experience and knowledge. Excluded from this are persons who are responsible for their safety accordingly are supervised or have been instructed by them in the use of the device. In order to prevent improper use, children must use the device to be supervised.
(EN 7.12) This device may be used by children from the age of eight and up Persons with physical or mental disabilities or lack of experience and Knowledge. However, the prerequisite is that they have been instructed in the safe use of the device and are aware of the associated risks. The device is not a toy for children. The device may only be cleaned and maintained by children under supervision.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>