beko BLSA16030SN Refrigerator Instruction Manual
- June 4, 2024
- Beko
Table of Contents
Refrigerator
Instruction of use BLSA16030SN
Please read this user manual first!
Dear Customer,
We hope that your product, which has been produced in modern plants and
checked under the most meticulous quality control procedures, will provide you
an effective service.
Therefore, read this entire user manual carefully before using the product and
keep it as a reference. If you hand over the product to someone else, give the
user manual as well.
The user manual will help you use the product in a fast and safe way.
- Read the manual before installing and operating the product.
- Make sure you read the safety instructions.
- Keep the manual in an easily accessible place as you may need it later.
- Read the other documents given with the product.
- Remember that this user manual is also applicable for several other models.
- Differences between models will be identified in the manual.
Explanation of symbols
Throughout this user manual the following symbols are used:
Important information or useful tips.
Warning against dangerous conditions for life and property.
Warning against electric voltage.
WARNING!
In order to ensure a normal operation of your refrigerating appliance, which
uses a completely environmentally friendly refrigerant the R600a (flammable
only under certain conditions) you must observe the following rules:
- Do not hinder the free circulation of the air around the appliance.
- Do not use mechanical devices in order to accelerate the defrosting, other than the ones recommended by the manufacturer.
- Do not destroy the refrigerating circuit.
- Do not use electrical appliances inside the food-keeping compartment, other than those that might have been recommended by the manufacturer.
INFORMATION
https://eprel.ec.europa.eu/
http://Model description in EU registration
database
The model information as stored in the product database can be reached by
entering the following website and searching for your model identifier (*)
found on the energy label.
This product is equipped with a lighting source of the “G” energy class. The
lighting source in this product shall only be replaced by professional
repairers.
Your refrigerator
1. Adjustable door shelves | 6. Defrost water collection channel – drain tube |
---|---|
2. Egg tray | 7. Movable shelves |
3. Bottle shelf | 8. Bottle holder |
4. Crisper | 9. Light bulb and thermostat box |
5. Crisper cover |
Figures that take place in this instruction manual are schematic and may not correspond exactly with your product. If the subject parts are not included in the product you have purchased, then it is valid for other models.
Important Safety Warnings
Please review the following information. Failure to observe this information
may cause injuries or material damage. Otherwise, all warranty and reliability
commitments will become invalid. Original Spare parts will be provided for 10
years, following the product purchasing date.
Intended use
This product is intended to be used:
- indoors and in closed areas such as homes;
- in closed working environments such as stores and offices;
- in closed accommodation areas such as farm houses, hotels, and pensions.
- It should not be used outdoors.
General safety
-
When you want to dispose of/scrap the product, we recommend you to consult the authorized service in order to learn the required information and authorized bodies.
-
Consult your authorized service for all your questions and problems related to the refrigerator. Do not intervene or let someone intervene to the refrigerator without notifying the authorized services.
-
For products with a freezer compartment; Do not eat cone ice cream and ice cubes immediately after you take them out of the freezer compartment! (This may cause frostbite in your mouth.)
-
For products with a freezer compartment; Do not put bottled and canned liquid beverages in the freezer compartment. Otherwise, these may burst.
-
Do not touch frozen food by hand; it may stick to your hand.
-
Unplug your refrigerator before cleaning or defrosting.
-
Vapor and vaporized cleaning materials should never be used in cleaning and defrosting processes of your refrigerator. In such cases, the vapor may get in contact with
the electrical parts and cause a short circuit or electric shock. -
Never use the parts on your refrigerator such as the door as a means of support or step.
-
Do not use electrical devices inside the refrigerator.
-
Do not damage the parts, where the refrigerant is circulating, with drilling or cutting tools. The refrigerant that might blow out when the gas channels of the evaporator, pipe extensions or surface coatings are punctured causes skin irritations and eye injuries.
-
Do not cover or block the ventilation holes on your refrigerator with any material.
-
Electrical devices must be repaired by only authorized persons. Repairs performed by incompetent persons create a risk for the user.
-
In case of any failure or during maintenance or repair work, disconnect your refrigerator main supply by either turning off the relevant fuse or unplugging your appliance.
-
Do not pull by the cable when pulling off the plug.
-
Place the beverage with higher proofs tightly closed and vertically.
-
Never store spray cans containing flammable and explosive substances in the refrigerator.
-
Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
-
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless
they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. -
Do not operate a damaged refrigerator. Consult with the service agent if you have any concerns.
-
The electrical safety of your refrigerator shall be guaranteed only if the earth system in your house complies with standards.
-
Exposing the product to rain, snow, sun, and wind is dangerous with respect to electrical safety.
-
Contact authorized service when there is power cable damage to avoid danger.
-
Never plug the refrigerator into the wall outlet during installation. Otherwise, risk of death or serious injury may arise.
-
This refrigerator is intended for only storing food items. It must not be used for any other purpose.
-
The label of technical specifications is located on the left wall inside the refrigerator.
-
Never connect your refrigerator to electricity-saving systems; they may damage the refrigerator.
-
If there is a blue light on the refrigerator, do not look at the blue light with optical tools.
-
For a manually controlled refrigerator, wait for at least 5 minutes to start the refrigerator after power failure.
-
This operation manual should be handed into the new owner of the product when it is given to others.
-
Avoid causing damage to the power cable when transporting the refrigerator. Bending cable may cause fire. Never place heavy objects on the power cable.
-
Do not touch the plug with wet hands when plugging the product.
-
Do not plug the refrigerator if the wall outlet is loose.
-
Water should not be sprayed on the inner or outer parts of the product for safety purposes.
-
Do not spray substances containing inflammable gases such as propane gas near the refrigerator to avoid fire and explosion risks.
-
Never place containers filled with water on top of the refrigerator; in the event of spillages, this may cause electric shock or fire.
-
Do not overload the refrigerator with food. If overloaded, the food items may fall down and hurt you and damage the refrigerator when you open the door.
-
Never place objects on top of the refrigerator; otherwise, these objects may fall down when you open or close the refrigerator door.
-
As they require a precise temperature, vaccines, heat-sensitive medicine and scientific materials and etc. should not be kept in the refrigerator.
-
If not to be used for a long time, the refrigerator should be unplugged. A possible problem in the power cable may cause fire.
-
The plug’s tip should be cleaned regularly with a dry cloth; otherwise, it may cause fire.
-
The refrigerator may move if adjustable legs are not properly secured on the floor. Properly securing adjustable legs on the floor can prevent the refrigerator to move.
-
When carrying the refrigerator, do not hold it from the door handle. Otherwise, it may be snapped.
-
When you have to place your product next to another refrigerator or freezer, the distance between devices should be at least 8 cm. Otherwise, adjacent side walls may be humidified.
-
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
For products with a water dispenser
The pressure of water mains should be a minimum of 1 bar. The pressure of
water mains should be maximum 8 bars.
-
Use only potable water.
Child safety -
If the door has a lock, the key should be kept away from the reach of children.
-
Children must be supervised to prevent them from tampering with the product.
Compliance with the WEEE Regulation and Disposing of the Waste Product
This product does not contain harmful and forbidden materials described in the
“Regulation on the Control of the Waste Electrical and Electronic Equipment”
issued by the T.R. Ministry of Environment and City Planning. Complies with
the WEEE Regulation.
This product has been manufactured with high-quality parts and materials which
can be reused and are suitable for recycling. Therefore, do not dispose the
product with normal domestic waste at the end of its service life. Take it to
a collection point for the recycling of electrical and electronic equipment.
Please consult your local authorities to learn the
nearest collection point. Help protect the environment and natural resources
by recycling used products. For children’s safety, cut the power cable and
break the locking
mechanism of the door, if any, so that it will be non-functional before
disposing of the product.
Package information
Packaging materials of the product are manufactured from recyclable materials
in accordance with our National Environment Regulations. Do not dispose of the
packaging materials together with the domestic or other wastes. Take them to
the packaging material collection points designated by the local authorities.
Do not forget…
Any recycled substance is an indispensable matter for nature and our national
asset wealth. If you want to contribute to the reevaluation of the packaging
materials, you can consult to your environmentalist organizations or the
municipalities where you are located.
HCA warning If your product’s cooling system contains R600a:
This gas is flammable. Therefore, pay attention to not damaging the cooling
system and piping during usage and transportation. In the event of damage,
keep your product away from potential fire sources that can cause the product
to catch a fire and ventilate the room in which the unit is placed.
Ignore this warning if your product’s cooling system contains R134a.
Type of gas used in the product is stated in the type label which is on the
left wall inside the refrigerator. Never throw the product in fire for
disposal.
Things to be done for energy saving
- Do not leave the doors of your refrigerator open for a long time.
- Do not put hot food or drinks in your refrigerator.
- Do not overload your refrigerator so that the air circulation inside of it is not prevented.
- Do not install your refrigerator under direct sunlight or near heat-emitting appliances such as ovens, dishwashers or radiators. Keep your refrigerator at least 30 cm away from heat emitting sources and at least 5 cm from electrical ovens.
- Pay attention to keeping your food in closed containers.
- Thawing frozen food in the fridge compartment will both provide energy savings and preserve the food quality.
Installation
**** In case the information which are given in the user manual are not taken into account, the manufacturer will not assume any liability for this.
Points to be paid attention to when the relocation of the refrigerator
- Your refrigerator should be unplugged. Before transportation of your refrigerator, it should be emptied and cleaned.
- Before it is re-packaged, shelves, accessories, crisper, etc. inside your refrigerator should be fixed with adhesive tape and secured against impacts. The package should be bound with thick tape or sound ropes and the transportation rules on the package should be strictly observed.
- Original packaging and foam materials should be kept for future transportation or moving.
Before you start the refrigerator
Check the following before you start to use your refrigerator:
-
Is the interior of the refrigerator dry and can the air circulate freely in the rear of it?
-
Clean the interior of the refrigerator as recommended in the “Maintenance and cleaning” section.
-
Connect the plug of the refrigerator to the wall socket. When the fridge door is opened, fridge internal lamp will turn on.
-
When the compressor starts to operate, a sound will be heard. The liquid and gases sealed within the refrigeration system may also give rise to noise, even if the compressor
is not running and this is quite normal. -
Front edges of the refrigerator may feel warm. This is normal. These areas are designed to be warm to avoid condensation.
Electrical connection
Connect your product to a grounded socket that is being protected by a fuse
with the appropriate capacity.
Important: The connection must be in compliance with national
regulations.
- The power plug must be easily accessible after installation.
- The electrical safety of your refrigerator shall be guaranteed only if the earth system in your house complies with standards.
- The voltage stated on the label located at left inner side of your product should be equal to your network voltage.
- Extension cables and multi-plugs must not be used for the connection.
** A damaged power cable must be replaced by a qualified electrician.
The product** must not be operated before it is repaired! There is the risk of electric shock!
Disposing of the packaging
The packing materials may be dangerous for children. Keep the packing
materials out of the reach of children or dispose of them by classifying them
in accordance with
the waste instructions stated by your local authorities. Do not throw away
with regular house waste, throw away on packaging pick-up spots designated by
the local authorities.
The packing of your refrigerator is produced from recyclable materials.
Disposing of your old refrigerator
Dispose of your old refrigerator without giving any harm to the environment.
- You may consult your authorized dealer or waste collection center of your municipality about the disposal of your refrigerator.
Before disposing of your refrigerator, cut out the electric plug and, if there are any locks on the door, make them inoperable in order to protect children against any danger.
Placing and Installation
If the entrance door of the room where the refrigerator will be installed is
not wide enough for the refrigerator to pass through, then call the authorized
service to have them
remove the doors of your refrigerator and pass it sideways through the door.
- Install your refrigerator to a place that allows ease of use.
- Keep your refrigerator away from heat sources, humid places and direct sunlight.
- There must be appropriate air ventilation around your refrigerator in order to achieve an efficient operation. If the refrigerator is to be placed in a recess in the wall, there must be at least 5 cm distance with the ceiling and at least 5 cm with the wall. Do not place your product on the materials such as rug or carpet.
- Place your refrigerator on an even floor surface to prevent jolts.
- Do not keep your refrigerator in ambient temperatures under 10°C.
Replacing the interior lamp
To change the Bulb/LED used for the illumination of your refrigerator, call
your Authorised Service. The lamp(s) used in this appliance is not suitable
for household room
illumination. The intended purpose of this lamp is to assist the user to place
foodstuffs in the refrigerator/freezer in a safe and comfortable way. The
lamps used in this appliance have to withstand extreme physical conditions
such as temperatures below -20°C.
Reversing the doors
Proceed in numerical order.
Preparation
-
Your refrigerator should be installed at least 30 cm away from heat sources such as hobs, ovens, central heaters, and stoves and at least 5 cm away from electrical ovens and
should not be located under direct sunlight. -
The ambient temperature of the room where you install your refrigerator should at least be 10°C. Operating your refrigerator under cooler conditions is not recommended with regard to its efficiency.
-
Please make sure that the interior of your refrigerator is cleaned thoroughly.
-
If two refrigerators are to be installed side by side, there should be at least 2 cm distance between them.
-
When you operate your refrigerator for the first time, please observe the following instructions during the initial six hours.
-
The door should not be opened frequently.
-
It must be operated empty without any food in it.
-
Do not unplug your refrigerator. If a power failure occurs out of your control, please see the warnings in the “Troubleshooting” section.
-
Original packaging and foam materials should be kept for future transportation or moving.
Using your refrigerator
Setting the operating temperature
The operating temperature is regulated by temperature control.
1 = Lowest cooling setting
(Warmest setting)
5 = Highest cooling setting
(Coldest setting) (Or)
Min. = Lowest cooling setting
(Warmest setting)
Max. = Highest cooling setting
(Coldest setting)
The average temperature inside the fridge should be around +5°C.
Please choose the setting according to the desired temperature.
Please note that there will be different temperatures in the cooling area. The
coldest region is immediately above the vegetable compartment. The interior
temperature also depends on ambient temperature, the frequency with which the
door is opened and the number of foods kept inside.
Frequently opening the door causes the interior temperature to rise. For this
reason, it is recommended to close the door again as soon as possible after
use.
Using interior compartments
Movable shelves: The distance between the shelves can be adjusted when
necessary.
Vegetable drawer: Vegetables and fruits can be stored in this compartment for
long periods without decaying.
Bottle shelf: Bottles, jars and tins can be placed in these shelves.
Cooling
Food storage
The fridge compartment is for the short-term storage of fresh food and drinks.
Store milk products in the intended compartment in the refrigerator. Bottles
can be stored in the bottle holder or in the bottle shelf of the door. Raw
meat is best kept in a polyethylene bag in the compartment at the very bottom
of the refrigerator. Allow hot foods and beverages to cool to room temperature
prior to placing them in the refrigerator.
-
Attention
Store concentrated alcohol only standing upright and tightly closed. -
Attention
Do not store explosive substances or containers with flammable propellant gases (canned cream, spray cans etc.) in the device. There is a danger of explosion.
Defrost
The fridge compartment defrosts automatically. The thawing water flows through
the drain channel into a collection container at the rear of the device.
During defrosting, water droplets form at the back of the fridge due to the
evaporator.
If not all of the drops run down, they may freeze again after defrosting
remove them with a cloth soaked in warm water, but never with a hard or sharp
object.
Check the flow of the thawed water from time to time. It may become plugged
occasionally.
Stopping your product
If your thermostat is equipped with “0” position:
– Your product will stop operating when you turn the thermostat button to “0”
(zero) position. Your product will not start unless to you turn the thermostat
button to position “1” or one of the other positions again. If your thermostat
is equipped with a “min” position:
– Unplug your product to stop it. Bottle holder This accessory can be used for
storing bottles or cans side by side.
Maintenance and cleaning
Never use gasoline, benzene or similar substances for cleaning purposes.
We recommend that you unplug the appliance before cleaning.
Never use any sharp abrasive instrument, soap, household cleaner,
detergent and wax polish for cleaning.
Use lukewarm water to clean the cabinet of your refrigerator and wipe it
dry.
Use a damp cloth wrung out in a solution of one teaspoon of bicarbonate of
soda to one pint of water to clean the interior and wipe it dry.
Make sure that no water enters the lamp housing and other electrical items.
If your refrigerator is not going to be used for a long period of time,
unplug the power cable, remove all food, clean it and leave the door ajar.
Check door seals regularly to ensure they are clean and free from food
particles.
To remove door racks, remove all the contents and then simply push the
door rack upwards from the base.
** never use cleaning agents or water that contain chlorine to clean the
outer surfaces and chromium-coated parts of the product. Chlorine causes
corrosion on such metal surfaces.
Protection of plastic surfaces**
Do not put the liquid oils or oil-cooked meals in your refrigerator in
unsealed containers as they damage the plastic surfaces of your refrigerator.
In case of spilling or
smearing oil on the plastic surfaces, clean and rinse the relevant part of the
surface at once with warm water.
Troubleshooting
Please review this list before calling the service. It will save your time and
money. This list includes frequent complaints that are not arising from
defective workmanship or material usage. Some of the features described here
may not exist in your product.
The refrigerator does not operate.
-
The plug is not inserted into the socket correctly. >>>Insert the plug into the socket securely.
-
The fuse of the socket to which your refrigerator is connected to or the main fuse has blown out. >>>Check the fuse.
Condensation on the side wall of the fridge compartment (MULTIZONE, COOL CONTROL and FLEXI ZONE). -
The ambient is very cold. >>>Do not install the refrigerator in places where the temperature falls below 10°C.
-
The door has been opened frequently. >>>Do not open and close the door of the refrigerator frequently.
-
Ambient is very humid. >>>Do not install your refrigerator into highly humid places.
-
Food containing liquid is stored in open containers. >>>Do not store food with liquid content in open containers.
-
The door of the refrigerator is left ajar. >>>Close the door of the refrigerator.
-
The thermostat is set to a very cold level. >>>Set the thermostat to a suitable level.
The compressor is not running. -
The Protective thermic of the compressor will blow out during sudden power failures or plug-out plug-ins as the refrigerant pressure in the cooling system of the refrigerator has not been balanced yet. The refrigerator will start running approximately after 6 minutes. Please call the service if the refrigerator does not startup at the end of this period.
-
The fridge is in defrost cycle. >>>This is normal for a full-automatically defrosting refrigerator Defrosting cycle occurs periodically.
-
The refrigerator is not plugged into the socket. >>>Make sure that the plug is fit in o the socket.
-
Temperature settings are not made correctly. >>>Select the suitable temperature value.
-
There is a power outage. >>>Refrigerator returns to normal operation when the power restores.
The operation noise increases when the refrigerator is running. -
The operating performance of the refrigerator may change due to the changes in the ambient temperature. It is nor mal and not a fault.
The refrigerator is running frequently or for a long time. -
New product may be wider than the previous one. Larger refrigerators operate for a longer period of time.
-
The room temperature may be high. >>>It is normal that the product operates for longer periods in hot ambient.
-
The refrigerator might be plugged in recently or might be loaded with food.
When the refrigerator is plugged in or loaded with food recently, it will take longer for it to attain the set temperature. This is normal.
-
Large amounts of hot food might be put in the refrigerator recently. >>>Do not put hot food into the refrigerator.
-
Doors might be opened frequently or left ajar for a long time. >>>The warm air that has entered into the refrigerator causes the refrigerator to run for longer periods. Do not open the doors frequently.
-
The freezer or fridge compartment door might be left ajar. >>>Check if the doors are closed completely.
-
The refrigerator is adjusted to a very low temperature. >>>Adjust the refrigerator temperature to a warmer degree and wait until the temperature is achieved.
-
Door seal of the fridge or freezer may be soiled, worn out, broken or not properly seated. >>>Clean or replace the seal. A damaged/broken seal causes the refrigerator to run for a longer period of time in order to maintain the current temperature.
The freezer temperature is very low while the fridge temperature is sufficient. -
The freezer temperature is adjusted to a very low value. >>>Adjust the freezer temperature to a warmer degree and check.
The fridge temperature is very low while the freezer temperature is sufficient. -
The fridge temperature is adjusted to a very low value. >>>Adjust the fridge temperature to a warmer degree and check.
Food kept in the fridge compartment drawers is frozen. -
The fridge temperature is adjusted to a very high value. >>>Adjust the fridge temperature to a lower value and check.
The temperature in the fridge or freezer is very high. -
The fridge temperature is adjusted to a very high value. >>>Fridge compartment temperature setting has an effect on the temperature of the freezer. Change the temperatures of the fridge or freezer and wait until the relevant compartments attain a sufficient temperature.
-
Doors are opened frequently or left ajar for a long time. >>>Do not open the doors frequently.
-
Door is ajar. >>>Close the door completely.
-
The refrigerator is plugged in or loaded with food recently. >>>This is normal. When the refrigerator is plugged in or loaded with food recently, it will take longer for it to attain the set temperature.
-
Large amounts of hot food might be put in the refrigerator recently. >>>Do not put hot food into the refrigerator.
Vibrations or noise. -
The floor is not level or stable. >>> If the refrigerator rocks when moved slowly, balance it by adjusting its feet. Also make sure that the floor is strong enough to carry the refrigerator and level.
-
The items put onto the refrigerator may cause noise. >>>Remove the items on top of the refrigerator.
There are noises coming from the refrigerator like liquid flowing, spraying, etc. -
Liquid and gas flows occur in accordance with the operating principles of your refrigerator. It is normal and not a fault.
The whistle comes from the refrigerator. -
Fans are used in order to cool the refrigerator It is normal and not a fault.
Condensation on the inner walls of the refrigerator. -
Hot and humid weather increases icing and condensation. It is normal and not a fault.
-
Doors are opened frequently or left ajar for a long time. >>>Do not open the doors frequently. Close them if they are open.
-
The door is ajar. >>>Close the door completely.
Humidity occurs on the outside of the refrigerator or between the doors. -
There might be humidity in the air; this is quite normal in humid weather. When the humidity is less, condensation will disappear.
Bad odor inside the refrigerator. -
No regular cleaning is performed. >>>Clean the inside of the refrigerator regularly with a sponge, lukewarm water or carbonate dissolved in water.
-
Some containers or package materials may cause the smell. >>>Use a different container or different brand packaging material.
-
Food is put into the refrigerator in uncovered containers. >>>Keep the food in closed containers. Microorganisms spreading out from uncovered containers can cause
unpleasant odors. -
Remove the foods that have expired best before dates and spoiled from the refrigerator.
The door is not closing. -
Food packages are preventing the door from closing. >>>Replace the packages that are obstructing the door.
-
The refrigerator is not completely even on the floor. >>>Adjust the feet to balance the refrigerator.
-
The floor is not level or strong. >>>Make sure that the floor is level and capable to carry the refrigerator.
Crispers are stuck. -
The food is touching the ceiling of the drawer. >>>Rearrange food in the drawer.
4578336577_AD
EN-DE-FR-NL
www.beko.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>