AZIO IK103-US IZO Wireless Backlit Mechanical Keyboard User Guide
- June 4, 2024
- AZIO
Table of Contents
AZIO IK103-US IZO Wireless Backlit Mechanical Keyboard
SUPPORT & WARRANTY
Here’s How to Reach Us
By phone: 866.468.1198
By email: support@aziocorp.com
On FB: www.facebook.com/aziocorp
Multilingual instruction guide is available for download at
www.aziocorp.com >Support> Keyboards> 120 Keyboard
AZIO Corporation warrants only to the original purchaser of this product, when purchased from an AZIO authorized reseller or distributor, that this product will be free from defects in material and workmanship under normal use and service for the length of the warranty period after purchase. AZIO reserves the right, before having any obligation under this warranty, to inspect the damaged AZIO product. Initial shipping costs of sending the AZIO product to the AZIO service center in Los Angeles, California, for inspection shall be borne solely by the purchaser. In order to keep this warranty in effect, the product must not have been mishandled or misused in any way.
This warranty does not cover any damage due to accidents, misuse, abuse or negligence. Please retain the dated sales receipt as evidence of the original purchaser & date of purchase. You will need it for any warranty services. In order to claim under this warranty, purchaser must contact AZIO and obtain an RMA # which is to be used within 15 days of issuance and must present acceptable proof of original ownership [such as original receipt) for the product. AZIO, at its discretion, shall repair or replace the defective unit covered by this warranty. This warranty is non-transferable and does not apply to any purchaser who bought the product from a reseller or distributor not authorized by AZIO, including but not limited to purchases from internet auction sites. This warranty does not affect any other legal rights you may have by operation of the law. Please contact AZIO through email, chat, or one of the technical support numbers listed for warranty service procedures.
No AZIO supplier, dealer, agent, or employee is authorized to alter or extend the terms of this Limited Warranty or to make any representation whatsoever. AZIO reserves the right to amend the terms of this Limited Warranty at any time without notice.
HELP RESOURCES
Before lodging a claim on the Limited Warranty, please review the online help
resources at aziocorp.com /support. If the product is still not functioning
properly after making use of these resources, please contact AZIO through
aziocorp.com / support or your authorized distributor
or dealer. You may be required to assist with the diagnosis process to verify
and ascertain any issues which you may be facing with the product. Service
options, parts availability, and response times may vary depending on the
country in which the Limited Warranty claim is lodged.
HOW TO MAKE A LIMITED WARRANTY CLAIM
If you purchased the product from an AZIO reseller, please contact the AZIO
reseller in regards to your Limited Warranty claim.
If you are unable to return the product to the AZIO reseller for whatever
reason, or if you have purchased the product directly from AZIO at aziocorp.
com, then please follow the steps below:
a. Email support@aziocorp.com to obtain a
Return Merchandise Authorization Number [“RMA Number”).
b. Note the RMA Number in a visible place on the in the shipping box or write
it on the shipping box.
c. Enclose a Valid Proof of Purchase inside the product’s package. Please
visit aziocorp.com /warranty for examples of a Valid Proof of Purchase.
d. Send the product to the following address: AZIO RMA
19933 Harrison Ave,
City of Industry, California 91789
Do not send AZIO any product without a valid RMA Number.
We advise that you select a method of shipping that is traceable [e.g. UPS,
DHL FedEx]. Any expense of claiming under this Limited Warranty will be borne
by the person making the claim [including any shipping and handling charges in
returning the product to AZIO, as well as any applicable customs, duties or
taxes in relation to the claim]. If the product is validly returned under the
terms of this Limited Warranty, AZIO will be responsible for postage expenses
for shipping the product back to you [but not any customs charges, duties, or
taxes!. You are responsible for ensuring that the product is properly packaged
and will bear the full risk of loss or damage for any product that is returned
improperly packaged. Risk of loss or damage in the returned product only
passes to AZIO when the product is received by AZIO and AZIO shall not be
responsible for items lost in transit to our address. In the event that the
procedure herein is not followed, AZIO reserves the right to accept the
delivery of the product on such terms that it may determine at its sole
discretion.
Returns Not Covered by this Limited Warranty.
If AZIO receives a product from the purchaser that does not meet the
requirements of this Limited Warranty, including (but not limited to) a
product that [al lacks a valid RMA Number, [bl is not accompanied by a valid
Proof of Purchase, [cl is no longer covered under the Warranty Period, or [d)
does not have a defect covered by this Limited Warranty, you may be
responsible for an assessment fee, return shipping and handling fees, and
other reasonable fees as may be required by AZIO prior to the product being
returned to you.
General.
This Limited Warranty applies only to the original purchaser of the product
and is non-transferable. No AZIO reseller, agent. distributor, or employee is
authorized to make any modification, extension or addition to this held to be
illegal or unenforceable the legality or enforceability of the remaining terms
shall not be affected or impaired.
SAFETY WARNING & CERTIFICATION
FCC STATEMENT
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
Instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions [1) this device may not cause harmful interference, and (21 this device must accept any interference received, including interference that may cause undesired operation.
BATTERY WARNING
THE AZIO IZO keyboard contains a Li-ion rechargeable battery. The general life
expectancy of the batteries used are based on actual usage. If you suspect the
battery’s contained power is low, please use the included USB connection cable
to recharge the battery.
Caution:
Please do not open, manipulate, or expose to conducting materials [metal),
moisture, liquid, fire, or heat. Conducting any of above action may cause
batteries to leak or explode, resulting in personal injury.
Please do not leave the rechargeable battery discharged or unused for extended
period, which might affect the life usage of the battery.
CA PROP 65 WARNING
This product contains chemicals known to the state of California to cause
cancer, and birth defects or other reproductive harm. For more information go
to www.P65Warnings.ca.gov
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT INFORMATION
Correct Disposal of This Product [Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems)
This marking shown on the product or its literature, indicates that it should
not be disposed with other household wastes at the end of its working life. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take this
item for environmentally safe recycling. Business users should contact their
supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal.
IMPORTANT PRODUCT INFORMATION GUIDE
SAFETY GUIDELINES
In order to have maximum safety while using AZIO IZO, we strongly suggest that
you adopt the following guidelines:
- Should you have trouble operating the device properly and troubleshooting does not work, please unplug the device and contact the AZI 0 support or go to www.aziocorp.com for support. Do not attempt to service or fix the device yourself at any time.
- Do not disassemble the device (doing so will void your warranty] and do not attempt to operate it under abnormal current loads.
- Keep the device away from liquid, humidity or moisture. Operate the device only within the specific temperature range of 0°C [32° F) to 40°C [104° F). Should the temperature exceed this range, unplug and/ or switch off the device in order to let the temperature stabilize to an optimal level.
COMFORT
Research has shown that long periods of repetitive motion, improper
positioning of your computer peripherals, incorrect body position, and poor
habits may be associated with physical discomfort and injury to nerves,
tendons, and muscles. Below are some guidelines to avoid injury and ensure
optimum comfort while using your AZIO IZD.
- Position your keyboard and monitor directly in front of you with your mouse next to it. Place your elbows next to your side, not too far away and your keyboard within easy reach.
- Adjust the height of your chair and table so that the keyboard and mouse are at or below elbow height.
- Keep your feet well supported, posture straight and your shoulders relaxed.
- During usage, relax your wrist and keep it straight. If you do the same tasks with your hands repeatedly, try not to bend, extend or twist your hands for long periods,
- Do not rest your wrists on hard surfaces for long periods. Use a wrist rest to support your wrist while gaming.
- Customize the keys on your keyboard to suit your style of usage in order to minimize repetitive or awkward motions.
- Do not sit in the same position all day. Get up, step away from your desk and do exercises to stretch your arms, shoulders, neck and legs.
- If you should experience any physical discomfort while using your keyboard, such as pain, numbness, or tingling in your hands, wrists, elbows, shoulders, neck or back, please consult a qualified medical doctor immediately.
MAINTENANCE & USE
For the metal and plastic parts of the keyboard, once a month we recommend you
unplug the device from the computer and clean it using a soft cloth or cotton
swab with a bit of warm water to prevent dirt buildup. Please do not use soap
or harsh cleaning agents. Remember to dry off any left over moisture on the
metal parts of the keyboard.
We are dedicated to provide our products with premium materials and present
them in the best condition, but it also needs love and caring to keep it at
optimum.
PACKAGE CONTENTS & SPECS
PACKAGE CONTENTS
SPECIFICATIONS
Interface Bluetooth + USB Hybrid
Switch Type Mechanical Switches
N-Key Rollover 6kRO via BT
NKRO via USB
Battery 5000 mAh Li-ion
Charging Connection USB Type-C Cable
Dimens. (LxWxH) 320 x 150 x 42 mm
Weight 1.8 lbs/ 793 g
System Requirements Windows 10 & above/ macOS
USB Port or Bluetooth 4.0
Package Contents IZO Wireless Backlit Mechanical Keyboard
USS Type-C Cable
User Guide
KEYBOARD SETUP
Keyboard Modes & Switches
The AZIO IZO Keyboard is a versatile keyboard that supports Mac and PC and can be connected wireless via Bluetooth or wired USB. The operating system selection and interface mode switches are both located on the backside of the keyboard. [Fg 01]
- OFF : In OFF mode. all circuitry is off. This is ideal when the keyboard will not be used for an extended duration of time. Please note that the keyboard can be charged while in OFF mode.
- BT : In BT mode, you may connect the keyboard to your computer wirelessly. While in Bluetooth mode. the backlight will automatically turn on.
- USB : In USB mode, please connect the included USB Type-C cable to the keyboard and your computer. While in USB mode, the keyboard will automatically begin charging and the backlight will turn on.
Pairing the Keyboard In Bluetooth Mode
Step.1 Switch the keyboard to BT Mode. The mode switch is located on the
backside of the keyboard.
Step.2 Select which bluetooth profile to connect to by pressing the FN
key and 1, 2, or 3 key together. For example, when pairing with the bluetooth
profile 1, hold down FN key and 1 key. Once successfully connecting to
bluetooth profile 1, The BT1 Indicator Light will flash quickly as connection
is establishing for 5 times then go away. For first time connection, the
default module is set at bluetooth profile 1. Please refer to the next section
for changing BT profiles.
Step.3 Put the keyboard in Pairing Mode by holding down the FN key and
the DEL key for a few seconds until the BT Profile Indicator Light goes from a
quick flash to a slow continuous flash. The keyboard is now in Pairing Mode.
Step.4 On your Mac, navigate to ‘System Preferences’ and select
‘Keyboard’. Next, click on ‘Set Up Bluetooth Keyboard’. For Windows 10, go to
‘Bluetooth Settings’ and select ‘Add Bluetooth or other device’. Once the
setup wizard finds ‘IZO_KB’, click on ‘Pair’.
Once pairing is successfully completed, the keyboard backlight will stop
flashing. The keyboard is now ready for use.
Multiple Bluetooth Profiles Setting
The AZIO IZO Keyboard supports up to 3 Bluetooth devices simultaneously.
Activate each connected BT device/profile with these key combinations, “FN+1”,
“FN+2”, or “FN+3”. The default profile is set to BT1, and in order to switch
profiles, use key combinations of “FN+2” or “FN+3”. Please follow the previous
instructions to pair with other devices.
Once a Bluetooth Profile is selected, the corresponding Bluetooth Profile
Indicator Light will light up as a static status. (Fg 02] To switch between
the 3 connected BT profiles. use the combination keys “FN + 1”, “FN + 2”, or
“FN + 3”. If there is a previous connection already established, the Bluetooth
Profile Indicator Light BT1, BT2, or BT3 will flash quickly for 3-5 seconds as
it attempts to reconnect to the device and stop flashing once reconnected.
Connecting the Keyboard through USB Connection
To connect via USB port, please use the Type-C Cable included in the package. Please connect the cable to the Keyboard USB Port (FG 03) and to your computer. When connection is successfully established. the keyboard will light up and be ready for use.
Setup for PC or Mac
Press the FN + HM keys to set the keyboard into PC or Mac mode. The Keyboard
Layout Mode Indicator Light [Fg 04] will reflect the selected layout choice.
Indicator shows that the keyboard is in PC mode.
PC
MAC
Indicator shows that the keyboard is in MAC mode.
PC
MAC
KEY FUNCTIONS
Hot Keys Legend
KEYBOARD DIAGRAM
KEYBOARD BATTERY
Checking the Battery Level
To check the battery power level of the keyboard, press the FN key and ESC key. The LEDs ranging from F1 to F10 will light up, with each key indicating 10% of total power. So if all 10 keys light up, this indicates that the keyboard battery is full. (Fg 05)
Charging the Keyboard
When the battery level is less than 20%, the Battery Indicator Light [Fg 06] will start blinking in red. Insert the included USB cable into the keyboard and plug the other end to a USB port or a USB charger. When plugged in, the indicator light will stop blinking and stay a static red. indicating that the keyboard is charging. Once fully charged. the indicator light will be off. Charging a completely drained battery to full on a USB 3.0 port will take approximately 6 hours due to its large power capacity. Actual charging time may vary depending on the power output of the charging source. The keyboard can be charged in any mode – BT, USB, or OFF mode.
Fig. 06 / Battery Indicator Light
CONTROL KNOB
Using the Dual-Function Control Knob
The dual-function knob controls the sound and backlight settings of the keyboard. By default. turning and pressing the knob modifies the sound settings. Pressing and holding the FN key while using the knob controls the backlight settings.
Sound Settings
- Turn the control knob clockwise to increase the sound volume.
- Turn the control knob counter-clockwise to decrease the sound volume.
- Press the control knob from the top to mute the sound.
Backlight Settings
- Press and hold the FN key while turning the control knob clockwise to increase the backlight brightness.
- Press and hold the FN key while turning the control knob counter-clockwise to decrease the backlight brightness. To turn the backlight off. simply decrease the backlight brightness down to 0%. The backlight increases and decreases in 10% increments.
- Press and hold the FN key while pressing down on the control knob to change backlight modes. The keyboard will cycle between 21 modes : Static, Breathing, Gradient, Shadow Splash, Splash, Reactive, Discreet, Row Splash, Area Splash, Rain Fall, Marquee, Scattered,Starlight, Diagonal, Rain Drop, Frequency, Snake, Wave, Drizzle, Fountain & Spiral.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>