AZIO CASCADE 98 Wireless Backlit Mechanical Keyboard User Guide
- June 12, 2024
- AZIO
Table of Contents
AZIO CASCADE 98 Wireless Backlit Mechanical Keyboard User Guide
PACKAGE CONTENT & SPECS
-
CASCADE Wireless Backlit Mechanical Keyboard
-
Quick Start Guide
-
USB Type-C Cable
-
RF Dongle
-
Keycap and Switch Puller
SPECIFICATIONS
Interface Bluetooth + USB Hybrid
Mechanical Switch Hot-Swappable with Default Gateron Switch
Backlight 8 RGB Colors / 17 Backlight Modes
N-Key Rollover NKRO via USB and BT
Battery 4000 mAh Li-ion
Charging Connection USB Type-C Cable
Dimens. (LxWxH) 414 x 146 x 42 mm
Weight 2.65 lbs / 1202 g
System Requirements Windows 10 & above / macOS
KEYBOARD SETUP
KEYBOARD MODE SWITCH
The AZIO CASCADE 98 Keyboard is a versatile keyboard that supports Mac and PC
and can be connected wirelessly via Bluetooth or wired via USB. The interface
mode switches are located on the back of the keyboard. (Fg 01)
A: Interface Mode
B: Charging Port
Wired : In Wired mode, please connect the included USB Type-C cable to the keyboard and your computer. While in Wired mode, the keyboard will automatically begin charging and the backlight will turn on. To turn off, unplug the cable.
Wireless : In Wireless mode, you may connect the keyboard to your computer wirelessly. While in Wireless mode, the backlight will automatically turn on. After 60 minutes of inactivity, the keyboard will hibernate, simply press any key to wake up and reconnect automatically.
PAIRING THE KEYBOARD IN WIRELESS MODE
**Step.1
Switch the keyboard to Wireless mode. The mode switch is located on the back
side of the keyboard.
Step.2
Select which Bluetooth profile to connect to by pressing the FN with 1, 2, or
3 key together for 3~5 seconds. Once the keyboard is in pairing mode, the
backlight of 1, 2, or 3 key’s will flash blue slowly. For example, when
pairing with Bluetooth profile 1, press the FN key and 1 key together for 3~5
seconds, the 1 key will flash blue light slowly
Step.3
On your Mac, navigate to ‘System Preferences’ and select ‘Bluetooth’. Find
the ‘CASCADE 98 1.0’ click on ‘Connect’. For Windows 10, go to ‘Bluetooth
Settings‘ and select ‘Add Bluetooth or other device’. Once the setup wizard
finds ‘CASCADE 98’, click on ‘Pair’. Once pairing is successfully completed,
the keyboard backlight will stop flashing. The keyboard is now ready for use.
CONNECTING THE KEYBOARD THROUGH USB CONNECTION
To connect via USB, switch to Wired mode and use the Type-C Cable included in
the package. Please connect the cable to the Keyboard USB Port (Fg 03) and to
your computer. When connection is successfully established, the keyboard will
light up and be ready for use.
CONNECTION LIGHT MODES
Pressing the FN key with the following keys will indicate the type of
connection and the corresponding color:
- Pressing the FN with ~: USB and a Green color
- Pressing the FN with 1: BT1 and a Blue color
- Pressing the FN with 2: BT2 and a Pink color
- Pressing the FN with 3: BT3 and a Light Blue color
- Pressing the FN with 4: RF and a Yellow color
PAIRING THE KEYBOARD WITH RF DONGLE
Step.1
Insert the RF dongle into an available usb port. The RF dongle is located at
the bottom of the keyboard.
**Step.2
Switch the keyboard to Wireless mode. The mode switch is located on the
back side of the keyboard.
Step.3
**
Press the FN with 4 key. The Wireless icon will blink yellow when connecting
and shine yellow when it is successfully connected.
CHECKING THE BATTERY LEVEL
When the battery level is less than 20%, the battery indicator light (Fg
04) will start blinking in red. When plugged in, the indicator light will stop
blinking and stay a static blue, indicating that the keyboard is charging. The
keyboard can be charged in any mode – Wireless, Wired, or OFF mode.
To check the battery power level of the keyboard, press the FN key and ESC
key. The Battery Level Indicator Keys (Fg 03) will flash, with each key from
F1 to F10 indicating 100% of total power. If all 10 keys light up, this
indicates that the keyboard battery is full.
KEYBOARD DIAGRAM
HOT KEYS LEGEND
MAC / Decrease Display
Brightness
PC / Launch Email Application
MAC / Increase Display
Brightness
PC / Launch Media Player
MAC / Expose
PC / Caculator
MAC / Dashboard
PC / Web Browser
MAC / Siri
PC / My Computer
MAC / None
PC / Sleep Mode
MAC / Previous Track
PC / Previous Track
MAC / Play / Pause
PC / Play / Pause
MAC / Next Track
PC / Next Track
MAC / Mute Volume
PC / Mute Volume
MAC / Decrease Volume
PC / Decrease Volume
MAC / Increase Volume
PC / Increase Volume
For Mac system, check your MAC setting to trigger the multimedia functions. For Windows, press FN with multimedia keys to trigger the functions.
BACKLIGHT CONTROL HOT KEYS LEGEND
Backlight Modes
Increase Backlight Brightness
Decrease Backlight Brightness
Backlight Color Toggle
Backlight Slow Down
Backlight Speed Up
Backlight Modes Press the FN + PG Up to cycle between 17 lighting modes.
Backlight Brightness Press the FN + Up Arrow Key or Down Arrow Key to
increase or decrease the backlight brightness.
Backlight Colors Press the FN + PG Down to cycle through the 8 RGB
Colors.
Backlight Speed Press the FN + Right Arrow Key or Left Arrow Key to speed
up or slow down the backlights. Only the Breathing and Wave mode can adjust
backlight speed.
HOT-SWAPPABLE SWITCHES
REMOVING SWTICHES
Step.1
You will need the Keycap & Switch Puller provided in the package to begin
removing your switches. Use the rectangular side of the puller to gently pull
and wiggle the keycaps off. Please make sure not to yank the keycaps off as
you may damage the switch.
Step.2
With the keycap off, you should be able to see the switch underneath. Use the
tong side of the puller to hook underneath the switch, pushing down onto the
two plastic tabs on the top and bottom of the switches. Now you may gently
pull and wiggle the switches out. Please avoid yanking on the switch.
INSTALLING NEW SWITCHES
Step.1
When you are ready to install new switches, please make sure that the pins on
your new switches are straight. Start by lining up the switch pins with the
sockets on the keyboard and gently pressing down until the switch glides into
place. If properly lined up, the switch should settle in and feel secured in
place.
Step.2
Once you’ve installed all the switches, you may test the keys with an online
key-test to see if they were properly installed. If any of the keys are not
working, you may have a bent pin on your switch. In this case, take out the
problem switch and straighten out the pins with the switch puller then re-
install the switch.
SUPPORT & WARRANTY
AZIO Corporation warrants only to the original purchaser of this product, when purchased from an AZIO authorized reseller or distributor, that this product will be free from defects in material and workmanship under normal use and service for the length of the warranty period after purchase. AZIO reserves the right, before having any obligation under this warranty, to inspect the damaged AZIO product. Initial shipping costs of sending the AZIO product to the AZIO service center in Los Angeles, California, for inspection shall be borne solely by the purchaser. In order to keep this warranty in effect, the product must not have been mishandled or misused in any way.
This warranty does not cover any damage due to accidents, misuse, abuse or negligence. Please retain the dated sales receipt as evidence of the original purchaser & date of purchase. You will need it for any warranty services. In order to claim under this warranty, purchaser must contact AZIO and obtain an RMA # which is to be used within 15 days of issuance and must present acceptable proof of original ownership (suchas original receipt) for the product. AZIO, at its discretion, shall repair or replace the defective unit covered by this warranty. This warranty is non-transferable and does not apply to any purchaser who bought the product from a reseller or distributor not authorized by AZIO, including but not limited to purchases from internet auction sites. This warranty does not affect any other legal rights you may have by operation of the law. Please contact AZIO through email, chat, or one of the technical support numbers listed for warranty service procedures.
No AZIO supplier, dealer, agent, or employee is authorized to alter or extend the terms of this Limited Warranty or to make any representation whatsoever. AZIO reserves the right to amend the terms of this Limited Warranty at any time without notice.
HELP RESOURCES
Before lodging a claim on the Limited Warranty, please review the online help
resources at aziocorp.com/support. If the
product is still not functioning properly after making use of these resources,
please contact AZIO through aziocorp.com/support
or your authorized distributor or dealer. You
may be required to assist with the diagnosis process to verify and ascertain
any issues which you may be facing with the product.Service options, parts
availability, and response times may vary depending on the country in which
the Limited Warranty claim is lodged.
HOW TO MAKE A LIMITED WARRANTY CLAIM
If you purchased the product from an AZIO reseller, please contact the AZIO
reseller in regards t your Limited Warranty claim. If you are unable to return
the product to the AZIO reseller for whatever reason, or if you have purchased
the product directly from AZIO at aziocorp. com, then please follow the steps
below:
a. Email support@aziocorp.com to obtain a Return Merchandise
Authorization Number (“RMA Number”).
b. Note the RMA Number in a visible place on the in the shipping box or
write it on the shipping box.
c. Enclose a Valid Proof of Purchase inside the product’s package. Please
visit aziocorp.com /warranty for examples of a Valid Proof of Purchase.
d. Send the product to the following address:
AZIO RMA
19933 Harrison Ave,
City of Industry, California 91789
Do not send AZIO any product without a valid RMA Number.
We advise that you select a method of shipping that is traceable (e.g. UPS,
DHL FedEx). Any expense of claiming under this Limited Warranty will be borne
by the person making the claim (including any shipping and handling charges in
returning the product to AZIO, as well as any applicable customs, duties or
taxes in relation to the claim). If the product is validly returned under the
terms of this Limited Warranty, AZIO will be responsible for postage expenses
for shipping the product back to you (but not any customs charges, duties, or
taxes). You are responsible for ensuring that the product is properly packaged
and will bear the full risk of loss or damage for any product that is returned
improperly packaged. Risk of loss or damage in the returned product only
passes to AZIO when the product is received by AZIO and AZIO shall not be
responsible for items lost in transit to our address. In the event that the
procedure herein is not followed, AZIO reserves the right to accept the
delivery of the product on such terms that it may determine at its sole
discretion.
Returns Not Covered by this Limited Warranty.
If AZIO receives a product from the purchaser that does not meet the
requirements of this Limited Warranty, including (but not limited to) a
product that (a) lacks a valid RMA Number, (b) is not accompanied by a valid
Proof of Purchase, (c) is no longer covered under the Warranty Period, or (d)
does not have a defect covered by this Limited Warranty, you may be
responsible for an assessment fee, return shipping and handling fees, and
other reasonable fees as may be required by AZIO prior to the product being
returned to you.
General.
This Limited Warranty applies only to the original purchaser of the product
and is non-transferable. No AZIO reseller, agent, distributor, or employee is
authorized to make any modification, extension or addition to this held to be
illegal or unenforceable the legality or enforceability of the remaining terms
shall not be affected or impaired.
SAFETY WARNING & CERTIFICATION
IMPORTANT PRODUCT INFORMATION GUIDE
SAFETY GUIDELINES
In order to have maximum safety while using AZIO Cascade 98, we strongly
suggest that you adopt the following guidelines:
- Should you have trouble operating the device properly and troubleshooting does not work, please unplug the device and contact the AZIO support or go to www.aziocorp.com for support. Do not attempt to service or fix the device yourself at any time.
- Do not disassemble the device (doing so will void your warranty) and do not attempt to operate it under abnormal current loads.
- Keep the device away from liquid, humidity or moisture. Operate the device only within the specific temperature range of 0°C (32°F) to 40°C (104°F). Should the temperature exceed this range, unplug and / or switch off the device in order to let the temperature stabilize to an optimal level.
COMFORT
Research has shown that long periods of repetitive motion, improper
positioning of your computer peripherals, incorrect body position, and poor
habits may be associated with physical discomfort and injury to nerves,
tendons, and muscles. Below are some guidelines to avoid injury and ensure
optimum comfort while using your AZIO Cascade.
- Position your keyboard and monitor directly in front of you with your mouse next to it. Place your elbows next to your side, not too far away and your keyboard within easy reach.
- Adjust the height of your chair and table so that the keyboard and mouse are at or below elbow height.
- Keep your feet well supported, posture straight and your shoulders relaxed.
- During usage, relax your wrist and keep it straight. If you do the same tasks with your hands repeatedly, try not to bend, extend or twist your hands for long periods.
- Do not rest your wrists on hard surfaces for long periods. Use a wrist rest to support your wrist while gaming.
- Customize the keys on your keyboard to suit your style of usage in order to minimize repetitive or awkward motions.
- Do not sit in the same position all day. Get up, step away from your desk and do exercises to stretch your arms, shoulders, neck and legs.
- If you should experience any physical discomfort while using your keyboard, such as pain, numbness, or tingling in your hands, wrists, elbows, shoulders, neck or back, please consult a qualified medical doctor immediately.
MAINTENANCE & USE
For the metal and plastic parts of the keyboard, once a month we recommend you unplug the device from the computer and clean it using a soft cloth or cotton swab with a bit of warm water to prevent dirt buildup. Please do not use soap or harsh cleaning agents. Remember to dry off any left over moisture on the metal parts of the keyboard. We are dedicated to provide our products with premium materials and present them in the best condition, but it also needs love and caring to keep it at optimum.
By phone: 866.468.1198
By email: support@aziocorp.com
On FB : www.facebook.com/aziocorp
Multilingual instruction guide is available for download at
www.aziocorp.com > Support > Keyboards > CASCADE 98
Keyboard
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>