AZIO FOQO Wireless Backlit Mechanical Keyboard User Guide
- June 5, 2024
- AZIO
Table of Contents
AZIO FOQO Wireless Backlit Mechanical Keyboard
SUPPORT & WARRANTY
Here’s How to Reach Us
By phone: 866.468.1198
By email: support@aziocorp.com
On FB: www.facebook.com/aziocorp
Multilingual instruction guide is available for download at www.aziocorp.com ► Support ► Keyboards ► FOQO Keyboard
AZIO Corporation warrants only to the original purchaser of this product, when purchased from an AZIO authorized reseller or distributor, that this product will be free from defects in material and workmanship under normal use and service for the length of the warranty period after purchase. AZIO reserves the right, before having any obligation under this warranty, to inspect the damaged AZIO product. Initial shipping costs of sending the AZIO product to the AZIO service center in Los Angeles, California, for inspection shall be borne solely by the purchaser. In order to keep this warranty in effect, the product must not have been mishandled or misused in any way.
This warranty does not cover any damage due to accidents, misuse, abuse or negligence. Please retain the dated sales receipt as evidence of the original purchaser & date of purchase. You will need it for any warranty services. In order to claim under this warranty, purchaser must contact AZIO and obtain an RMA # which is to be used within 15 days of issuance and must present acceptable proof of original ownership (such as original receipt) for the product. AZIO, at its discretion, shall repair or replace the defective unit covered by this warranty. This warranty is non-transferable and does not apply to any purchaser who bought the product from a reseller or distributor not authorized by AZIO, including but not limited to purchases from internet auction sites. This warranty does not affect any other legal rights you may have by operation of the law. Please contact AZIO through email, chat, or one of the technical support numbers listed for warranty service procedures.
No AZIO supplier, dealer, agent, or employee is authorized to alter or extend the terms of this Limited Warranty or to make any representation whatsoever: AZIO reserves the right to amend the terms of this Limited Warranty at any time without notice.
HELP RESOURCES
Before lodging a claim on the Limited Warranty, please review the online help
resources at aziocorp.com/support. If the
product is still not functioning properly after making use of these resources,
please contact AZIO through
aziocorp.com/support or your authorized
distributor or dealer. You may be required to assist with the diagnosis
process to verify and ascertain any issues which you may be facing with the
product. Service options, parts availability, and response times may vary
depending on the country in which the Limited Warranty claim is lodged.
HOW TO MAKE A LIMITED WARRANTY CLAIM
If you purchased the product from an AZIO reseller, please contact the AZIO reseller in regards to your Limited Warranty claim. If you are unable to return the product to the AZIO reseller for whatever reason, or if you have purchased the product directly from AZIO at aziocorp.com, then please follow the steps below:
- Email support@aziocorp.com to obtain a Return Merchandise Authorization Number (“RMA Number”).
- Note the RMA Number in a visible place on the in the shipping box or write it on the shipping box.
- Enclose a Valid Proof of Purchase inside the product’s package. Please visit aziocorp.com /warranty for examples of a Valid Proof of Purchase.
- Send the product to the following address:
AZIO RMA
19933 Harrison Ave,
City of Industry, California 91789
Do not send AZIO any product without a valid RMA Number.
We advise that you select a method of shipping that is traceable (e.g. UPS,
OHL FedEx). Any expense of claiming under this Limited Warranty will be borne
by the person making the claim (including any shipping and handling charges in
returning the product to AZIO, as well as any applicable customs, duties or
taxes in relation to the claim). If the product is validly returned under the
terms of this Limited Warranty, AZIO will be responsible for postage expenses
for shipping the product back to you (but not any customs charges, duties, or
taxes). You are responsible for ensuring that the product is properly packaged
and will bear the full risk of loss or damage for any product that is returned
improperly packaged. Risk of loss or damage in the returned product only
passes to AZIO when the product is received by AZIO and AZIO shall not be
responsible for items lost in transit to our address. In the event that the
procedure herein is not followed, AZIO reserves the right to accept the
delivery of the product on such terms that it may determine at its sole
discretion.
Returns Not Covered by this Limited Warranty.
If AZIO receives a product from the purchaser that does not meet the
requirements of this Limited Warranty, including (but not limited to) a
product that (a) lacks a valid RMA Number, (b) is not accompanied by a valid
Proof of Purchase, (c) is no longer covered under the Warranty Period, or (d)
does not have a defect covered by this Limited Warranty, you may be
responsible for an assessment fee, return shipping and handling fees, and
other reasonable fees as may be required by AZIO prior to the product being
returned to you.
General
This Limited Warranty applies only to the original purchaser of the product
and is non-transferable. No AZIO reseller, agent, distributor, or employee is
authorized to make any modification, extension or addition to this held to be
illegal or unenforceable the legality or enforceability of the remaining terms
shall not be affected or impaired.
PACKAGE CONTENTS & SPECS
PACKAGE CONTENTS
SPECIFICATIONS
-
Interface Bluetooth + USB Hybrid
-
Switch Type Gateron Switches
-
Backlight 9 LED Colors/ 4 RGB Light Modes
-
N-Key Rollover 6kRO via BT/ NKRO via USB
-
Battery 5000 mAh Li-ion
-
Charging Connection USB Type-C Cable
-
Dimens. (LxWxH) 320 x 158 x 48.5 mm
-
Weight 2.9 lbs/ 1300 g
-
System Requirements Windows 10 & above/ macOS
-
USB Port or Bluetooth
-
Package Contents FOQO Wireless Backlit Mechanical Keyboard
USB Type-C Cable
-
User Guide
KEYBOARD SETUP
Keyboard Mode Switch Knob
The AZIO FOQO Keyboard is a versatile keyboard that supports Mac and PC and
can be connected wirelessly via Bluetooth or wired via USB. The interface mode
switches are located on the knob located on the top left of the keyboard. (Fg
DI)
Fig. 01 / Keyboard Mode Switch
USB: In USB mode, please connect the included USB Type-C cable to the keyboard and your computer. While in USB mode, the keyboard will automatically begin charging and the backlight will turn on.
OFF: In OFF mode, all circuitry is off. This is ideal when the keyboard will not be used for an extended duration of time. Please note that the keyboard can be charged while in OFF mode.
BT: In BT mode, you may connect the keyboard to your computer wirelessly.
While in Bluetooth mode, the backlight will automatically turn on.
After 60 minutes of inactivity, the keyboard will hibernate, simply press any
key to wake up and reconnect automatically.
Setup for PC / MAC
Press the FN + HM keys to set the keyboard into PC or Mac mode. The keyboard
is on Mac mode by default and will remain in the last used setting after
setup. The Keyboard Layout Mode Indicator Light (Fg 02) will light up
according to the selected layout choice.
Pairing the Keyboard In Bluetooth Mode
Step.1
Switch the keyboard to BT Mode. Choose BTl, BT2, or BT3 to set up a profile;
the keyboard will automatically go into Pairing Mode for 5 minutes until a
connection is successfully established if the keyboard has never connected to
a device before. The DEL key light will blink slowly indicating it is in
Pairing Mode.
Step.2
To manually setup the keyboard in Pairing Mode, hold down the FN key and the
DEL key for a few seconds until the DEL key light blinks slowly. The keyboard
is now in Pairing Mode.
Step.3
On your Mac, navigate to ‘System Preferences’ and select ‘Keyboard’. Next,
click on ‘Set Up Bluetooth Keyboard’. For Windows 10, go to ‘Bluetooth
Settings· and select ‘Add Bluetooth or other device’.
Once the setup wizard finds ‘AZIO-FOQO’, click on ‘Pair’. Once pairing is
successfully completed, the keyboard backlight will stop flashing. The
keyboard is now ready for use.
Multiple Bluetooth Profiles Setting
Fig./ Bluetooth Profile Modes
The AZIO FOQO Keyboard supports up to 3 Bluetooth Devices simultaneously. Use
the Mode Switch knob to change the mode to the desired Bluetooth profile: BT1,
BT2, or BJT. Please follow the previous instructions to pair with other
devices.
Once a Bluetooth Profile is selected, the DEL key will light up for a few
seconds indicating that the device is attempting a connection. If successfully
connected to a device that has been setup, the PC/Mac Mode
Indicator Lights (Fg 02) and the Control Knob Indicator Lights (Fg 03) will be
lit up in a specific mode. If no connection is found, the indicator lights
will be off. You may operate one device at a time and please allow 1-3 seconds
when switching between different Bluetooth profiles.
Connecting the Keyboard through USB Connection
To connect via USB port, please use the Type-C Cable included in the package. Please connect the cable to the Keyboard USB Port (Fg 04) and to your computer. When connection is successfully established, the keyboard will light up and be ready for use.
KEYBOARD DIAGRAM
Hot Keys Legend
CONTROL KNOB/ SOUND & LIGHT
Using the Control K nob to Adjust Multimedia & Lighting
By default, the control knob will start in Multimedia mode, as indicated by the lights below the knob labeled “S” for Multimedia, “L.:’ for Lighting Control and “M” for Macro Key. To change modes. hold down the FN key and press the Left Arrow key to cycle to the desired mode. The selected mode will be lit up in white.
Multime dia Settings
- Turn the control knob clockwise to increase the sound volume.
- Turn the control knob counter-clockwise to decrease the sound volume.
- Press the center button on the control knob to mute the sound. Press the top arrow button to play or pause the current media. Press the bottom arrow button to stop the current media. Press the left arrow button to play the previous media. Press the right arrow button to play the next media.
Backlight Settings
- Turn the control knob clockwise to increase the backlight brightness.
- Turn the control knob counter-clockwise to decrease the backlight brightness.
- Press the center button on the control knob to turn the backlight ON/ OFF. Press the top arrow button or bottom arrow button to cycle through the backlight colors: White (default), Red, Orange, Yellow,
Green, Blue, Purple, Sky Blue, & RGB. Press the left arrow button or right arrow button to cycle between 4 lighting modes: Static, Breathing, Wave & Reactive.
CONTROL KNOB/ MACRO
Programming Macros with the Control K nob
Step.1
Switch the keyboard to Macro Mode by holding down FN + Left Arrow. The
indicator light will light up on “M” when you are in the macro setting.
Step.2
Press FN + Center / Up / Down / Left or Righi arrow button on the control knob
to begin the macro recording session. Whichever button you’ve pressed will be
where the keyboard saves the macro commands. You may save up to 5 separate
macros on each button. The arrow buttons on the knob will flash slowly showing
that it is now recording.
Step.3
Type in your command that you’d like to save as a macro. You may type in a
single function key, a combination function key such as ‘Ctrl + C’, or a
combination of alphabet, number, and symbols up to 10 characters. If nothing
is entered within 15 seconds, the keyboard will exit the macro recording
session without saving any settings.
Step.4
After typing in your command, press any button on the control knob to exit
with the saved macro setting.
The arrow buttons on the knob will stop flashing to show that it is no longer
recording. To use the macro anytime, simply press the button on the control
knob that you saved the macro onto and it should replicate the command.
KEYBOARD BATTERY
Checking the Battery Level
To check the battery power level of the keyboard, press the FN key and ESC
key. The Fl to F1D key LEDs will flash, with each key indicating 10% of total
power. White light will flash if the power is above 20% and red light will
flash when the power is below 20%. If all 10 keys light up, this indicates
that the keyboard battery is full. (Fg 05)
Charging the Keyboa rd
When the battery level is less than 20%, the Power Indicator Light (Fg 06)
will start blinking in red. Insert the included USB cable into the keyboard
and plug the other end to a USB port or a USB charger. When plugged in, the
indicator light will stop blinking and stay a static red, indicating that the
keyboard is charging. Once fully charged, the indicator light will be off.
Charging a completely drained battery to full on a USB 3.0 port will take
around 4-6 hours due to its large power capacity. Actual charging time may
vary depending on the power output of the charging source. The keyboard can be
charged in any mode – BT, USB, or OFF mode.
Fig. 06 / Power Indicator Light
Blinking Red light > Battery Low Power (<20%)
Steady Red light > Battery Charging
Light Off > Battery Fully Charged
WASTE ELECTRICAL AND ELECTRONIC EQUI PMENT INFORMATION
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems)
This marking shown on the product or its literature, indicates that it should
not be disposed with other household wastes at the end of its working life. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take this
item for environmentally safe recycling. Business users should contact their
supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal.
IMPORTANT PRODUCT INFORMATION GUIDE SAFETY GUIDELINES
In order to have maximum safety while using AZIO FOQO, we strongly suggest
that you adopt the following guidelines:
- Should you have trouble operating the device properly and troubleshooting does not work, please unplug the device and contact the AZIO support or go to www.aziocorp.com for support. Do not attempt to service or fix the device yourself at any time.
- Do not disassemble the device (doing so will void your warranty) and do not attempt to operate it under abnormal current loads.
- Keep the device away from liquid, humidity or moisture. Operate the device only within the specific temperature range of 0°C (32° F) to 40°C (104° F). Should the temperature exceed this range, unplug and/ or switch off the device in order to let the temperature stabilize to an optimal level. COMFORT
Research has shown that long periods of repetitive motion, improper positioning of your computer peripherals, incorrect body position, and poor habits may be associated with physical discomfort and injury to nerves. tendons, and muscles. Below are some guidelines to avoid injury and ensure optimum comfort while using your AZIO FOQO.
- Position your keyboard and monitor directly in front of you with your mouse next to it. Place your elbows next to your side, not too far away and your keyboard within easy reach.
- Adjust the height of your chair and table so that the keyboard and mouse are at or below elbow height.
- Keep your feet well supported, posture straight and your shoulders relaxed.
- During usage, relax your wrist and keep it straight. If you do the same tasks with your hands repeatedly, try not to bend, extend or twist your hands for long periods.
- Do not rest your wrists on hard surfaces for long periods. Use a wrist rest to support your wrist while gaming.
- Customize the keys on your keyboard to suit your style of usage in order to minimize repetitive or awkward motions.
- Do not sit in the same position all day. Get up, step away from your desk and do exercises to stretch your arms, shoulders, neck and legs.
- If you should experience any physical discomfort while using your keyboards, such as pain, numbness, or tingling in your hands, wrists, elbows, shoulders, neck or back, please consult a qualified medical doctor immediately.
MAINTENANCE & USE
For the metal and plastic parts of the keyboard, once a month we recommend you
unplug the device from the computer and clean it using a soft cloth or cotton
swab with a bit of warm water to prevent dirt buildup. Please do not use soap
or harsh cleaning agents. Remember to dry off any leftover moisture on the
metal parts of the keyboard.
We are dedicated to providing our products with premium materials and presenting them in the best condition, but it also needs love and care to keep it at optimum.
SAFETY WARNING & CERTIFICATION
FCC STATEMENT
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
Instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
BATTERY WARNING
THE AZIO FOQO keyboard contains a Li-ion rechargeable battery. The general
life expectancy of the batteries used are based on actual usage. If you
suspect the battery’s contained power is low, please use the included
USB connection cable to recharge the battery.
Caution:
Please do not open, manipulate, or expose to conducting materials (metal),
moisture, liquid, fire, or heat.
Conducting any of above action may cause batteries to leak or explode,
resulting in personal injury.
Please do not leave the rechargeable battery discharged or unused for extended
period, which might affect the life usage of the battery.
CA PROP 65 WARNING
This product contains chemicals known to the state of California to cause
cancer, and birth defects or other
reproductive harm. For more information go to www.P65Warnings.ca.gov
STATEMENT OF COMPLIANCE WITH EU DIRECTIVE
AZIO CORPORATION declares that the AZIO FOQO Keyboard is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU.
The full Declaration of Conformity can be requested via the following:
Company: AZIO CORPORATION
Address: 19933 Harrison Ave, City of Industry, California 91789
E-mail: support@aziocorp.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>