OMNITRONIC BDT-5.0 Bluetooth 5.0 Transceiver User Manual
- June 3, 2024
- OMNITRONIC
Table of Contents
BDT-5.0 Bluetooth 5.0 Transceiver
User Manual
Product Guide
BDT-5.0 Bluetooth 5.0 Transceiver
Welcome
Thank you for choosing the BDT5.0. This compact Bluetooth audio adapter makes
your home entertainment wireless. When used as a Bluetooth transmitter it can
stream the sound of your TV to Bluetooth headphones or speakers. When used as
a Bluetooth receiver it can be connected to your home audio system for
wireless music playback from your Bluetooth-enabled smartphone. The adapter
supports dual link and can pair and connect to 2 Bluetooth devices
simultaneously. So you can use two headphones or speakers at the same time.
The practical bypass mode allows you to use wired speakers without having to
reconnect audio cables every time.
Special features
✓ Dual link: stream audio to two Bluetooth devices in transmitter mode
✓Multipoint: pair two Bluetooth audio sources in receiver mode
✓ Bypass mode for wired audio output
✓Flexible audio connections: works with any device with optical, RCA or AUX
connector
✓ 1.8″ LC display and big rotary knob for easy operation
✓ Music control in receiver mode: play/pause and volume
✓ Audio input/output via 3.5 mm jack and optical Toslink jacks
✓ Bluetooth version 5.0 allows for fast and stable connections
✓ Long range: up to 14 min TX mode and 20-30 m in RX mode
✓All necessary audio connection cables included
As there are different Bluetooth chipsets incorporated into your devices, it
is possible that your headset or speaker does not support dual link.
Package contents
Specifications
Bluetooth version: 5.0
Bluetooth frequency: 2402-2480 MHz
Bluetooth name: BDT-5.0
Range TX: >14 m (line-of-sight), RX: >20-30 m (line-of-sight)
Supported codecs: SBC
Dual link: stream to 2 devices
Multi point: pair 2 audio sources
Input/output: AUX: 3.5 mm jack; OPT: digital, optical Toslink
Display: 29 x 461.7 mm
Power supply 5 V DC -50 mA via USB-C port
Battery/microphone: no
Dimensions. weight: 112 x 84 x 33 mm. 70 g
Subject to change.
Product overview
- Power on off
- Wireless paring/re-pairing
- Mode switch(TX /RX / BYPASS)
- Search and pair Bluetooth device (TX mode)
- Multi-function button RX: pause / volume +/-, TX: up / down confirm
- USB-C power input
- Output (RX mode)
- Input (TX mode)
Note: Optical mode (OPT) is the default audio mode. The device switches
to AUX mode as soon as an AUX cable is connected. If this is unplugged again,
the device switches back to optical mode.
Bluetooth transmitter mode (TX)
Connect the audio adapter to a power source (TV or power adapter) with the USB
cable and connect it to the TV with one of the audio cables.
Note: If you experience problems, please check the audio
settings of the TV and whether you are using the correct connection on the TV.
If necessary, do an AUX test with headphones. Dolby/DTS is not supported for
optical output, please use PCM audio format.
The BDT-5.0 can simultaneously stream audio to two Bluetooth headsets. Both
can play e.g. the same TV sound. To do this, activate Bluetooth on the second
headset.
Then press **to pair and confirm with .**
- Press ** to disconnect the current two paired devices and enter search mode. Available devices are shown on the display. To connect, select and confirm with .**
- Press to automatically pair two available devices. Once the connection is established, both device names are shown on the display.
- The BDT-5.0 will automatically reconnect to the recently connected two headsets once they are in pairing mode.
Bluetooth receiver mode (RX)
Connect the audio adapter to a power source (TV or power adapter) with the USB
cable and connect it to the TV with one of the audio cables.
- The BDT-5.0 can pair with 2 smartphones or audio devices simultaneously, but can only play music from one device at any time.
- Press ****to disconnect the current2 paired devices and enter search mode.
- The BDT-5.0 stores the pairing information and will attempt to reconnect with the 2 most recently paired devices when powered on.
Bypass mode (no Bluetooth)
Bypass mode connects input and output directly and the Bluetooth function is
disabled.
Now you can use a wired speaker without the need to reconnect audio cables at
the TV
Connect the audio adapter to a power source (TV or power adapter) with the USB
cable and connect it to the TV with one of the audio cables. 
- Bypass mode works only with the same type of connection, i.e. AUX input to AUX output and optical input to optical output.
- Please set the audio format to PCM on the TV for optical audio output, Dolby/DTS is not supported.
Safety warnings
- Be sure to read all warnings before starting the operation. Please keep this guide for further needs.
- Only use according to the instructions given in this guide. Improper use is dangerous and will void any warranty claim. Observe all safety instructions.
- This product is not a toy. Keep it out of the reach of children and pets. Do not leave packaging material lying around carelessly.
- IMPORTANT: This product is not an outdoor product! Only for indoor use! Do not use this device near water.
- Protect the product against excessive humidity and heat, and to drastic temperature fluctuation. The recommended temperature is -5 to +45 C.
- Please clean the product with a soft. dry cloth without detergent.
- There are no serviceable parts inside the device. Unauthorized modifications on the device are prohibited.
- This unit corresponds to all required directives of the EU and is therefore marked with ****.
If the unit is to be put out of operation definitively, take it to a local recycling plant for a disposal which is not harmful to the environment. Do not dispose of as municipal waste. Contact your retailer or local authorities for more information.
Manufacturer declarations
Support
For product updates, documentation, and support please visit
www.omnitronic.deYou can find the latest version of this user guide in the
product’s download section.
Copyright
©2022 Omnitronic
All rights reserved. No part of this document may bereproduced in any form
without the written permission of the copyright owner.
Disclaimer
The contents of this document are subject to revision without notice due to
continued progress in methodology, design, and manufacturing. Omnitronic shall
have no
liability for any error or damage of any kind resulting from the use of this
document.
Trademarks
All product names and trademarks mentioned herein are the property of their
respective owners. They are not connected to Omnitronic in any way.
ww.omnitronic.de.
TECHNOLOGY DESIGNED FOR PLEASUR€WWW.OMNITRONIC.DE
Omnitronic is a brand of Steinigke Showtechnic GmbH
Andreas-Bauer-Str. 5-97297 Waldb~ttelbrunn, Germany
No. 13072196 Publ. 07/22
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>