DOMETIC GP-ADV-LiFeP04-100 Advanced Lithium Battery User Guide
- June 3, 2024
- Dometic
Table of Contents
DOMETIC GP-ADV-LiFeP04-100 Advanced Lithium Battery
WARNINGS
- Only wire 8 batteries maximum in parallel
- Wire a maximum of 4 in series
- Do not get wet
OVERVIEW
INTERFACE DESCRIPTION LED (POWER BUTTON) INDICATORS
POWER UP – POWER OFF
Press the button for more than 3 seconds and release. The battery will enter
Power Off mode from Power On mode. The LED will turn off. POWER UP – POWER OFF
e
Press the button for more than 3 seconds and release. The battery will enter
Power Off mode from Power On mode. The LED will turn off.
BLUETOOTH APP
Scan the QR code to download the Go Power! Connect App for use with the Sun
Cycle Advanced Lithium Battery.
CAN PORT WIRING
HOW TOUSE
To prevent a surge current, perform a “pre-discharge” as outlined in the steps below.
- Step 1 – Ensure all batteries are in Power Off mode.
- Step 2 – Connect batteries following the series or parallel connection diagrams found at gpelectric.com/advanced-lithium-wiring. Cable 2 must be installed for each battery pack followed by a Cable 3 cable on the last battery.
- Step 3 – Ensure battery pack terminals are correctly installed and connected to the inverter system.
- Step 4 – Press the power button on one of the battery packs for 3 seconds to wake up all battery packs from Power Off mode. The LED indicator will turn on.
NOTE:
Batteries are in Power Off mode when unboxed. Press the Power button for 3
seconds to turn on. If it doesn’t turn on, you will need to charge the
battery. The batteries need to be configured before they can be used. Please
see battery manual for instructions on battery configuration
BATTERY SPECIFICATIONS
177°F (20°() ±5 is the recommended storage temperature at 60% State of Charge while being in Power Off mode. Find tech tips, manuals and support at gpelectric.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>