OMNITRONIC SHP-940M Dynamic Stereo Monitoring Headphones User Guide
- June 5, 2024
- OMNITRONIC
Table of Contents
OMNITRONIC SHP-940M Dynamic Stereo Monitoring Headphones
Introduction
The Omnitronic SHP-900M are closed, circumaural, dynamic stereo headphones
with a very high output power. The powerful 50 mm neodymium magnet and a HQ
voice coil provide for excellent sound with high-output bass and extended
highs. The headphones not only effectively attenuate external noise but also
minimize spillage from the headphones to the outside world. This makes them
especially suitable for use as monitoring headphones in a noisy environment,
film and theater applications, DJ or recording applications.
Connect and Listen
Plug the audio cable into the 3.5 mm stereo jack input on the headphones and
on your audio device. For locking the connection turn the plug to the right on
the headphones. For unlocking turn the plug to the left. Turn down the volume
before connecting the headphones. If the plug on the audio cable does not fit,
use the adapter provided for 6.3 mm jacks.
Transport and Cleaning
For good transmission quality and best possible comfort, the headband should
be adjusted to properly fit your head. Please use a soft lint-free and
moistened cloth for cleaning. Never use alcohol or solvents!
Specifications
- Item number: 140003 31
- Transducer type: Dynamic, neodymium (NdFeB)
- Frequency range:10-35000 Hz
- Speaker: 50mm
- Impedance: 320
- Maximum input power: 1800 mW
- Sensitivity: 99 dB
- Cable length: 3 m
- Connection: 3.5 mm/6.3 mm stereo jack plug
- Weight: 340 g
Subject to change.
Protecting the environment
When to be definitively put out of operation, take the product to a local recycling plant for a disposal which is not harmful to the environment. Devices marked with this symbol must not be disposed of as household waste. Contact your retailer or local authorities for more information.