OMNITRONIC OD-6 Weather Proof Wall Speaker User Manual

: June 1, 2024
: OMNITRONIC

Table of Contents

⚠ SAFETY INSTRUCTIONS
PROTECTING THE ENVIRONMENT
INSTALLATION
TECHNICAL SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OMNITRONIC OD-6 Weather Proof Wall Speaker User Manual

OMNITRONIC OD-6 Weather Proof Wall Speaker User Manual

Thank you for purchasing this speaker for wall mounting. The speaker is protected against dust and low-pressure water jets and thus can be used in outdoor areas. The connection must be made by skilled personnel only. Please read these operating instructions carefully before using the product. They contain important information for the correct use of your product. Please keep them for future reference.

⚠ SAFETY INSTRUCTIONS

Only use the product according to the instructions given herein. No guarantee claims for the units and no liability for any resulting personal damage or material damage will be accepted if the product is used for other purposes than originally intended, if it is not correctly connected or operated, or if it is not repaired in an expert way.
Unauthorized rebuilds or modifications of the product are not permitted for reasons of safety and render the warranty invalid.
This product is not a toy. Keep it out of the reach of children. Do not leave packaging material lying around carelessly.
This product is in accordance with protection grade IP65 and can be used in outdoor areas. However, do not immerse the product in water, this will destroy it.
Protect the product against excessive humidity and heat. The recommended temperature is -5 to +45°C. Y Speaker cables are sensitive to electrical interference. Hence, it is recommended to lay them at a distance of several meters to sources of interference (e.g. dimmers, light switches).
Make sure that the product is installed securely and cannot fall down. Serious injury to persons can be caused if the speakers fall down. Comply with the standards and rules that apply in your country.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the device.
For overhead use secure the device with a safety bond. A corresponding eyelet is mounted on the housing for this purpose. Fasten the safety bond in such a way that, in the event of a fall, the maximum drop distance of the device will not exceed 20 cm.
For commercial use the country-specific accident prevention regulations of the government safety organization for electrical facilities must be complied with at all times.
Make sure that impedance and power rating specified in the technical data match the connected amplifier’s data. Otherwise, the speakers or the amplifier may be damaged. The total impedance for the connected speakers must not be less than the minimum impedance for the amplifier.
This product is maintenance-free, except for occasional cleaning. You can use a slightly dampened cloth for cleaning.
Never open the product. If this product is no longer working properly or is visibly damaged, take it out of operation and consult your local dealer. Do not attempt to repair the product yourself.

PROTECTING THE ENVIRONMENT

When to be definitively put out of operation, take the product to a local recycling plant for a disposal which is not harmful to the environment. Devices marked with this symbol must not be disposed of as household
waste. Contact your retailer or local authorities for more information.

INSTALLATION

Mount the speaker to the wall using the supplied bracket.
Turn off the amplifier before making any connection.
Remove the cover from the speaker.
Connect the speaker to the amplifier outputs with a suitable speaker cable (black clamp = negative pole, red clamp = positive pole).
When connecting several speakers, make sure that all speakers have the same polarity and that the amplifier is not overloaded.
Replace the cover.