BONTEMPI 48 6200 Wireless Amplifier With Microphone User Manual
- June 17, 2024
- BONTEMPI
Table of Contents
BONTEMPI 48 6200 Wireless Amplifier With Microphone
Product Specifications:
- Wireless Amplifier with Microphone
- Frequency: 2.4GHz
- Supported Media: Wireless, USB Flash Drive, Micro SD (TF), FM Radio
- Input Connections: Micro SD card slot, USB flash drive socket, Micro USB charging socket, Microphone socket, External audio source socket
Product Usage Instructions
Powering On and Selecting Mode:
To power on the amplifier and select the desired mode:
- Ensure the device is charged, if using wireless mode, ensure it is connected to power.
- Use the selector switch to choose between Wireless, USB Flash drive, Micro-SD, or FM Radio mode.
- For Micro SD and USB Flash drive modes, insert the respective media into the designated slots.
Using Wireless Connection:
To use the wireless connection feature:
- Ensure the amplifier is in Wireless mode.
- Pair your external device (e.g., smartphone) with the amplifier via Bluetooth or other wireless connection methods.
- Play audio on your external device to transmit wirelessly to the amplifier.
Connecting Microphone and External Audio Source:
To connect a microphone or external audio source:
- Insert the microphone cable into the microphone socket on the amplifier.
- If using an external audio source like an MP3 player or smartphone, connect it to the external audio source socket using a compatible cable (not included).
Frequently Asked Questions (FAQ):
Q: Can I use a USB flash drive with this amplifier?
A: Yes, you can use a USB flash drive with the amplifier by inserting it
into the USB flash drive socket.
Q: How do I switch between different modes on the amplifier?
A: Use the selector switch on the amplifier to switch between Wireless,
USB Flash drive, Micro-SD, or FM Radio modes.
POWER SUPPLY
This product is powered by a built-in lithium battery that can be charged with the USB-microUSB cable included in the box. To charge the battery, insert one end of the cable into the DC socket 7 and the other end into the USB socket:
- of a 100-240V~ mains power supply unit unit that has an output with the following characteristics: Vdc=5V I=1A; – a PC; – a Power bank. The charging time is about 3-4 hours whereas the product usage time is about 3-4 hours.
WARNING: All batteries or transformers with safety insulation must be
checked regularly for faults in cable, wire, or plug insulation or other
parts.
This instrument is only to be connected to equipment bearing either of the
following symbols:
NOTE: Rating plate information was located at bottom enclosure of the apparatus.
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items mentioned here below,
please refer to Council Administration office regarding specialized waste
collection Centres.
-
BATTERY DISPOSAL: At the end of the service life of the product, the battery contained in it must be disposed of separate from general undifferentiated waste.
-
PACKAGING DISPOSAL: Take the paper, cardboard and corrugated board to the appropriate waste collection Centres. Plastic material must be placed in the relevant collection containers.
The symbols indicating the various types of plastic are:
Key for the different types of plastic materials:
PET= Polyethylene terephthalate- PE= Polyethylene, code 02 for PE-HD, 04 for PE-LD
- PVC =Polyvinyl chloride
- PP= Polypropylene
- PS= Polystyrene, Polystyrene foam
- O= Other polymers (ABS, Laminates, etc.)
-
WEEE (Waste Electrical and Electronic Equipment):
This symbol indicates that the product should not be disposed of with household waste. It must be placed at the appropriate collection point for recycling, thus conserving natural resources. Proper disposal of the product helps to prevent negative effects on the environment and human health.
SWITCHING ON/OFF
To switch on the instrument move selector 6 to ON. To switch off move the same selector to OFF.
This Speaker has 5 modes:
- Wireless connection;
- Connection with MP3 cable;
- Play audio/music from USB flash drive;
- Play audio/music from Micro SD card;
- FM radio.
Press MODE 1 to switch mode.
WIRELESS CONNECTION
- Turn on the device search on your smartphone, tablet, etc. and select “Bontempi486200” to pair it with the Speaker: an audible sound indicates that it is connected.
- Search through the playlist on your smartphone or tablet for a song and play it. The track will be played on the Speaker.
Note: for wireless connection to work, keep the device within 9 m.
CONNECTION WITH MP3 CABLE
With a jack cable (not supplied) you can connect an external audio source (MP3
player, tablet, smartphone, etc., not supplied).
- Insert the cable into the AUX socket 9.
- Insert the other end of the cable into the “HEADPHONE” socket 10 of your music player or other audio source.
- Search through the playlist on your smartphone or tablet for a song and play it. The track will be played on the Speaker.
PLAY AUDIO/MUSIC FROM USB FLASH DRIVE
To play MP3 tracks from a USB flash drive, plug the latter into USB port 5 and
the first track will be played automatically.
PLAY AUDIO/MUSIC FROM MICRO SD CARD
To play MP3 tracks from a micro SD card, insert the latter into the slot 4
until it clicks into place; the first track will be played automatically.
Note: the gold contacts must face downwards. If you can’t push the card into the slot with your finger, use a paperclip or tiny tool until the card locks.
THE FOLLOWING SETTINGS APPLY FOR MODES FROM 1 TO 4:
Play/Pause
While playing music, press the key 3 to pause /play the song.
Previous/next song
To choose the previous or next song, press the or keys 2.
Volume
To adjust the volume, hold down the Vol + or Vol – keys 2 on the Speaker or
press the “volume” keys on your device.
FM RADIO MODE
- Press the MODE button 1 and select the FM radio mode.
- Press the SCAN button 3. This will launch a search for the best radio frequencies and then save them.
- At the end of this cycle, which will last about 2 minutes, the scan will end on an FM radio station. To select other radio stations, press button or 2 .
To adjust the volume, keep the Vol + or Vol – button 2 pressed .
NOTE: Plug the USB-microUSB cable into the 5V DC outlet 7 to improve reception: The cable will function as an antenna .
MICROPHONE
TROUBLESHOOTING GUIDE
| Problem | Solution |
|---|---|
| The power warning light does not turn on | _Check the connection between the |
USB port and the charging cable._
The Wireless connection breaks down| Decrease the distance between
mobile phone and amplifier. Remove obstacles.
No sound can be heard from the external music source| Adjust the volume of
the external music source. Properly plug the cable in.
ICOM S.p.A. reserves all rights to modify specifications of this product
without notice.
Read and keep this manual for future reference.
ATTENTION: Do not use alcohol, solvents or similar chemical substances for cleaning. Use a soft cloth dampened in a bland solution of water and neutral detergent. Dip the cloth in the solution and then wring it until it is nearly dry.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>