evatroni AF-PB008 Portable Charger Instruction Manual
- June 15, 2024
- evatroni
Table of Contents
evatroni AF-PB008 Portable Charger
Thanks for purchasing the products. Please read this User Manual thoroughly before using the product and retain it for future reference.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING – When using this product, basic precautions should always be
followed, including the following:
- Read all the instructions before using the product.
- To reduce the risk of injury, close supervision is necessary
- when the product is used near children.
- Do not put fingers or hands into the product.
- Do not expose power bank to rain or snow.
- Use of a power supply or charger not recommended or sold by power pack manufacturer may result in a risk of fire or injury to persons.
- Do not use the power bank over its output rating.
- Overload outputs above the rating may result in a risk of fire or injury to persons.
- Do not use the power bank that is damaged or modified.
- Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
- Do not disassemble the power bank. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
- Do not expose a power pack to fire or excessive temperature.
- Exposure to fire or temperature above 100°C may cause an explosion. The temperature of 100°C can be replaced by the temperature of 212°F.
- Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
- Switch off the power bank when not in use.
- Do not place or use this product in a high-temperature or damp environment. Do not expose it to the sun.
- Dispose of the power bank according to the local statutes and environmental protection regulations.
PRODUCT DIAGRAM
SPECIFICATIONS
- Battery Capacity: 30000mAh / 111Wh
- Min Battery Capacity: 28800mAh / 106.56Wh
- PD Input: 5V-3A, 9V- 3A, 12V =3A, 15V- 3A, 20V -3.25A, 65W Max
- PD Output: 5V-3A, 9V-3A, 12V-3A, 15V- 3A, 20V-3.25A, 65W Max
- QC Output: 5V= 3A, 9V-2A, 12V=1.5A 18W Max
- Total Output: 45W+18W
- Rated Capacity: 20V- 5A, 4200mAh
USING YOUR POWER BANK
Charging Your Power Bank(Fig.1)
- Charge the power bank via the PD port.
- The LED indicators will light up progressively.
Note:
- It is recommended to fully charge the unit before first use.
- Unplug the charging cable when charging has completed.
Charging Your Device(Fig.2)
- Connect your device to the power bank via the QC port. Charging will start automatically.
- To switch PD input/output, press and hold the power button for 5s.
Note: Unplug the charging cable when charging has completed.
Checking the Battery Level
Press the Power Button to check the battery Level.
Warranty
- 18 Month Warranty.
- Lifetime Support.
Note: This warranty is void if the defect is caused by:
- Damage caused by force majeure.
- Accidental damage, misuse, abuse, neglect.
- Improper repair or alteration by unauthorized persons.
- Expired warranty period.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
WEEE Compliance
DO not to dispose of product as unsorted municipal waste and to collect such
WEEE separately, for proper treatment, recovery and recycling, please take
this product) to designated collection points where it will be accepted free
of charge. Please contact your local authority for further details of your
nearest designated collection station.
E-MAIL: techsupport@tyutech.com
MANUFACTURER
Manufacturer: Shenzhen NearbyExpress Technology Development Co., Ltd.
Address: Floor 9, Building E, Galaxy World Phase II, Shenzhen, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>