Tuoxingyuan Technology K1-310 Car Dashcam Instructions
- June 1, 2024
- Tuoxingyuan Technology
Table of Contents
Tuoxingyuan Technology K1-310 Car Dashcam
This product uses high-performance chips to provide high-definition video and seamless dynamic images. Support 1080PHD and 720P video recording. Please read this manual carefully before use and keep it properly. We hope this product can meet your needs and serve you for a long time!
Description of appearance and key functions
- Mode key/menu
- Up key
- Flip down key
- Power key/OK confirmation key
- USB power
- AV-IN interface
- Video indicator
- 3.16-inch display
- TF card slot
- Camera
- Horn
- Reset keyhole
Power key/OK confirmation key
Function 1: On/Off function In the shutdown state, short press the [Power Key] to turn on the power of the machine, and the machine automatically starts to work. In the power on state, long press the [Power Key] for 3 seconds to automatically save the video files and user settings and turn off the computer.
OK confirmation key
- Function 1 : In the main interface or video recording interface, press [Power Keyl briefly to turn on/off video recording.
- Function 2 : In the video playback interface, short press [Power Key) to play/pause the file
- Function 3 : In the setting interface, briefly press [Power Key] to save the setting task
Mode key/menu
In standby mode, press the mode key briefly to enter the main interface; Long
press the mode key to enter the setting menu;
Turn up key
In standby mode and menu mode, press the scroll up key briefly to scroll up;
In the main interface mode, briefly press the up key to turn on or off the
recording volume; In the video playback mode, press the scroll up key briefly
to reduce the playback volume.
Turn down key
In standby mode and menu mode, press the flip key briefly to scroll down for
setting; In the main interface mode, press the flip key briefly to switch the
front and rear view picture in picture interface; In the video playback mode,
press the scroll up key briefly to increase the playback volume.
Installation Guide
-
Turn off the car engine.
-
Insert the TF card into the recorder card slot.
[Note] Please use a high-speed TF card (above Class 6) with a capacity of no less than 4GB. The TF card supports a maximum of 32GB. -
Fix the recorder on the original rearview mirror of the car.
-
Insert the car charger into the cigarette lighter.
-
Connect the USB interface of the recorder to the vehicle charger with the charging extension cable.
[Note] During wiring, the charging extension line can be laid along the edge of the windshield. -
Install the rear camera at the rear of the vehicle, and pay attention to the direction during installation. The wiring can be laid along the vehicle roof. After installation, connect the rear plug to the recorder AV-IN.
-
Adjust the lens position to ensure that the lens is level with the ground.
-
Start the engine and check whether the machine is installed correctly.
[Note] When the machine is installed correctly, the system operation indicator is on; The machine starts to enter the recording state, and the recording indicator flashes. Please check whether the picture on the display screen is normal. If the picture is inverted, please contact us in time.
Function introduction
Use the driving video function
Start the car engine, the recorder will start automatically and start the
video recording function. Click “DASH CAM” on the main interface to enter the
video recording interface, and click the video icon “ ” to start or close the
video recording function; Click the video recording button on the main
interface to enable or disable the video recording function. When the icon
displays solid is red and flashing. When the car engine is turned off, the
recorder automatically saves the video content and shuts down. The video
recorded is saved in segments on the TF card. When the TF card is full, the
recorder will overwrite the video recorded earlier.
[Note] a The recorded time can be set to 1/2/3/5 in the menu. If any of the four levels of 1/2/3/5 minutes is selected, when the TF card is full, the recorder will overwrite the previously recorded image;
- The video files and photo files of the front and rear cameras are saved in the “DCIMA folder” and “DCIMB folder” respectively under the “DCIM” directory in the TF card
Use the photographing function
Click “Take a picture” on the main interface to enter the photographing mode,
and click the icon of “Take a picture” to take a picture; To return to the
main interface, click the Back button at the bottom right of the screen ‘
return to the main interface.
Video playback
Click “Video Playback” on the main interface to enter the playback mode, and
click The current file can be locked. Click “ ” To unlock the current file,
click “
” You can page up and down the file and click the play key icon * ”
Perform video playback. Click the icon when the video is playing “ ” The video
can be reminded by clicking the icon “ ” The video can be fast-forwarded.
Click the Back button icon at the bottom right of the screen’ ‘ Return to the
main interface.
One key locking function
In the video recording, click the lock flag” files, and the lock icon is “ ,
click “Lock the current video, locked Unlock the current file. The locked file
will not be overwritten.
One button mute function
Click the microphone icon in the main interface or video mode ” Turn recording
on or off. [Prompt] The settings will be saved automatically, and there is no
need to set the mute function after restart.
Camera interface switching function
In the video interface. Click the interface conversion icon “ ” Pull the
interface screen forward/backward and switch between the picture in the
picture.
Time/date setting
In the menu bar, select the “Time/Date” option in “General Settings” to set
the time/date.
[Note] In order to effectively record the date and time of obtaining evidence for driving safety accidents, please set the correct time before using this machine.
Movement detection function
Click “Function Setting” in the main interface to enter the function setting
interface, click video recording setting and then click motion detection to
turn on/off the motion detection function. When the current camera senses that
there are moving objects in the surrounding area, the machine automatically
enters the camera state. The system stops recording 10 seconds after the front
camera does not detect moving objects [Prompt] If you need to use the movement
detection function for a long time, please keep the machine powered on for a
long time.
[Note] Please enter the settings and exit the motion detection when the recording is stopped.
Collision sensing function (optional)
The machine has a built-in collision sensor (G-sensor). Click “Function
Setting on the main interface to enter the function setting interface. Click
the video recording setting, and then click the scroll-down key to find
“Gravity Sensing”. Click the gravity sensing to set the collision sensing
function. The machine will automatically lock the current video if it vibrates
(such as collision) during the recording process. [Prompt] The G-sensor
supports sensitivity adjustment: off/high/medium/low, and can change the
settings in the gravity sensor settings according to actual needs.
Parking monitoring function (optional)
Click the function setting in the main interface to enter the function setting
interface, click the video recording setting, and then find the parking
monitoring function. When the parking monitoring function is turned on, if the
car has a slight vibration in the shutdown state, the recorder will
automatically start recording and lock. This video is locked and will not be
overwritten. After 17 seconds of recording, the machine will automatically
shut down.
Reversing visibility
First of all, connect the car charger to the recorder, pull the camera plug
back to connect to the AV-IN socket, and pull the black red wire on the camera
to connect the reversing lamp. The car charging machine will automatically
start the recording state. If there is a reverse in any state, the reverse
image will be displayed. The machine will automatically return to the video
recording mode after the end of reverse viewing.
Product specifications
Product structure
Note: The design and specification of this product are subject to change without notice
FCC Warnning
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>