Q-SYS Core 610 Processor User Guide
- June 3, 2024
- q-sys
Table of Contents
Q-SYS Core 610 Processor
IMPORTANT SAFETY INSTRUCTIONS
- Read these instructions and keep a copy for future reference. Strictly follow and heed all instructions and warnings. Install the device only as instructed.
- Do not use or submerge this device in or near water or liquids.
- Clean only with a dry cloth. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near, or into the device.
- Do not install the device near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers).
- Refer all service to qualified personnel.
- Observe all applicable local codes. Consult a licensed professional engineer when devising an equipment installation to ensure compliance.
Maintenance and Repair
WARNING: Advanced technology, e.g., the use of modern materials and powerful electronics, requires specially adapted maintenance and repair methods. To avoid a danger of subsequent damage to the apparatus, injuries to persons and/or the creation of additional safety hazards, all maintenance or repair work on the apparatus should be performed only by a QSC authorized service station or an authorized QSC international distributor. QSC is not responsible for any injury, harm or related damages arising from any failure of the customer, owner or user of the apparatus to facilitate those repairs.
Overview
The Q-SYS Core 610 represents the next-generation of Q-SYS processing, pairing the Q-SYS OS with an enterprise-grade Dell COTS server to deliver a flexible and scalable audio, video and control solution for a vast range of larger scale applications. It is a fully networked AV&C processor, letting you centralize processing for multiple spaces or zones while distributing network I/O where it’s most convenient.
Reference
Dell Server Hardware — For additional information regarding hardware
specifications, regulatory compliance, or iDRAC, visit the Dell server website
at dell.com/servers.
Q-SYS Specifications and Software — For additional information regarding the
Q-SYS Core 610 and other software feature specifications, Q-SYS Designer
Software, and other Q-SYS products and solutions, visit qsys.com.
Self Help Portal — Read knowledge base articles and discussions, download
software and firmware, view product documents and training videos, and create
support cases at qscprod.force.com/selfhelpportal/s.
Customer Support — Refer to the Contact Us page on the Q-SYS website for
Technical Support and Customer Care, including their phone numbers and hours
of operation. Go to qsys.com/contact-us.
Warranty — For a copy of the QSC Limited Warranty, go to qsys.com/support
/warranty-statement.
Front Panel Features
- Status and ID indicator – Enabled via Q-SYS Designer Software
- Bezel lock
- Removable active bezel
- LCD navigation buttons
- LCD – Displays Q-SYS Core processor name, status, and health alerts.
Rear Panel Features
-
Serial communications RS232 (male DE-9) – For connection to serial devices
-
On-board LAN ports – Not supported
-
Q-SYS LAN ports (RJ45, 1000 Mbps) – From left to right: LAN A, LAN B, AUX A, AUX B
-
Power supply unit (PSU) – 450W
-
ID button and indicator – Press to identify the device in Q-SYS Designer Software
-
CMA jack – For connection to a cable management arm
-
USB ports – Not supported
-
iDRAC dedicated port (RJ45) – For remote iDRAC access:
Default IP = 192.168.0.120, Default username = root, Default password = calvin -
VGA video output (female HD15) – Not supported
© 2022 QSC, LLC All rights reserved. QSC, the QSC logo, Q-SYS, and the Q-SYS
logo are registered trademarks of QSC, LLC in the U.S. Patent and Trademark
Office and other countries. Patents may apply or be pending. All other
trademarks are the property of their respective owners.
qsys.com/patents
qsys.com/trademarks
References
- Servers - Rack, Tower & Rugged Servers | Dell USA
- Self Help Forum
- Q-SYS - Cloud-manageable Audio, Video and Control
- Contact Us
- Patents
- Warranty Statement
- Trademark Usage Guidelines | Q-SYS