Q-SYS XR11 Core 6000 CXR Processor User Guide

Q-SYS XR11 Core 6000 CXR Processor

INTRODUCTION

The Q-SYS Core 6000 CXR processor is an industry-first solution that combines the processing capabilities of the Q-SYS realtime operating system with the compact, ruggedized, MIL-STD, NEBS and Marine compliant Dell PowerEdge XR11 server. Core 6000 CXR is the only IT-grade solution that brings audio, video, and control processing into marine applications.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions and keep a copy for future reference. Strictly follow and heed all instructions and warnings. Install the device only as instructed.
2. Do not use or submerge this device in or near water or liquids.
3. Clean only with a dry cloth. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near, or into the device.
4. Do not install the device near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers).
5. Refer all service to qualified personnel.
6. Observe all applicable local codes. Consult a licensed professional engineer when devising an equipment installation to ensure compliance.

Maintenance and Repair

WARNING: Advanced technology, e.g., the use of modern materials and powerful electronics, requires specially adapted maintenance and repair methods. To avoid a danger of subsequent damage to the apparatus, injuries to persons and/or the creation of additional safety hazards, all maintenance or repair work on the apparatus should be performed only by a QSC authorized service station or an authorized QSC international distributor. QSC is not responsible for any injury, harm or related damages arising from any failure of the customer, owner or user of the apparatus to facilitate those repairs.

Installation

IMPORTANT: The Core 6000 CXR ships with an AC Filter Kit (with included rack installation instructions) and a Rugged Kit. Both kits are required for SOLAS installations under DNV Type Approval.

Refer to the Dell EMC PowerEdge XR11 Installation and Service Manual at dell.com for server and Rugged Kit installation instructions. Information about the rail solutions compatible with your system can be found in the “Rail sizing and rack compatibility matrix” section.

Reference

Dell Server Hardware — For additional information regarding hardware specifications, regulatory compliance, or iDRAC, visit the Dell server website at dell.com/servers.
Q-SYS Specifications and Software — For additional information regarding the Q-SYS Core 6000 CXR and other software feature specifications, Q-SYS Designer Software, and other Q-SYS products and solutions, visit qsys.com.
Self Help Portal — Read knowledge base articles and discussions, download software and firmware, view product documents and training videos, and create support cases at qscprod.force.com/selfhelpportal/s.
Customer Support — Refer to the Contact Us page on the Q-SYS website for Technical Support and Customer Care, including their phone numbers and hours of operation. Go to qsys.com/contact-us.
Warranty — For a copy of the QSC Limited Warranty ,go to qsys.com/support/warranty-statement.

Front Panel Features

1. Status and ID indicator – Enabled via Q-SYS Designer Software
2. Removable filtered bezel – Refer to Dell documentation for maintenance requirements
3. Power button
4. Q-SYS media drive (under bezel) – One 2.5-inch, 960 GB, SATA 6 Gb SSD drive. Additional drives not supported.
5. Information tag (under bezel) – Includes the product serial number and Q-SYS Support contact information
6. USB port – Not supported

Rear Panel Features

1. PCIe expansion card riser 1 (slot 1) – Not supported
2. Serial communications RS232 (male DE-9) – For connection to serial devices
3. iDRAC dedicated port (RJ45) – For remote iDRAC access. Default IP = 192.168.0.120, Default username = root, Default password = calvin
4. LAN ports (four RJ45, 1000 Mbps) – From left to right: LAN A multimedia, LAN B multimedia, AUX A, AUX B
5. Power supply unit 1 (PSU1) – 1400 W, hot-plug, universal input
6. Power supply unit 2 (PSU2) – 1400 W, hot-plug, universal input
7. ID button – Press to identify the device in Q-SYS Designer Software
8. SFP ports (Quad Port 25GbE SFP28) – Not supported
9. VGA video output (female HD15) – Not supported
10. USB ports – Not supported
11. PCIe expansion card riser 3 (slot 3) – Not supported

CUSTOMERS SUPPORT

© 2022 QSC, LLC All rights reserved. QSC, the QSC logo, Q-SYS, and the Q-SYS logo are registered trademarks of QSC, LLC in the U.S. Patent and Trademark Office and
other countries. Patents may apply or be pending. All other trademarks are the property of their respective owners.
qsys.com/patents
qsys.com/trademarks

References

• Computers, Monitors & Technology Solutions | Dell USA
• Servers - Rack, Tower & Rugged Servers | Dell USA
• Self Help Forum
• Q-SYS - Cloud-manageable Audio, Video and Control
• Contact Us
• Patents
• Warranty Statement
• Trademark Usage Guidelines | Q-SYS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>