Q-SYS PL-SUB15 Passive Subwoofer Instruction Manual

Q-SYS PL-SUB15 Passive Subwoofer

INSTRUCTION MANUAL

Q-SYS PL-SUB15

Passive installation subwoofer

KEY FEATURES

• 15-in LF transducer in a bass-reflex enclosure
• Weatherized (IP54) wooden enclosure for indoor and protected outdoor environments
• Omnidirectional or cardioid radiation, selectable in Q-SYS (requires deployment of two or more subwoofers)
• Ground or flown deployment (M10 rigging points)
• Black (RAL 9011)

The Q-SYS PL-SUB15 is a passive installation subwoofer that features an 15-in, 4-in voice coil transducer in weatherized (IP54) wooden enclosure. Its compact form factor is suitable for a broad range of applications from entertainment and small sporting venues to corporate auditoriums or higher ed lecture halls. The integrated rigging hardware enables secured ground stacking or flying, while the complete audio experience of the PL Series loudspeakers are completed by the power and performance delivered by the Q-SYS Platform, including simplified setup and custom voicings, rock-solid power via Q-SYS network amplifiers, advanced telemetry, monitoring and customizable end user control.

DELIVER THE RIGHT SYSTEM FOR YOUR CUSTOMERS

PL Series loudspeakers provide an abundance of options to ensure the right loudspeaker solution anywhere in the venue that requires higher performance audio. All of the PL Series loudspeakers feature a weatherized enclosure (IP54 rating), making them a perfect choice for indoor or protected outdoor applications. Pairing them with the Q-SYS Platform, including Q-SYS processing and network amplifiers extends a number of unique benefits from custom loudspeaker voicings (Intrinsic Correction™) and protection safeguards to advanced telemetry, helping to speed up deployment and deliver a more holistic system operation experience.

FULL CONTROL AND MONITORING FOR ENTERTAINMENT VENUES

The Q-SYS Platform offers a full-featured control engine that lets you deploy the right level of intuitive user control and system visibility for each stakeholder in the venue. Design an advanced system control interface with Q-SYS UCI Editor for the sound operators, containing any combination of gain, preset triggers, status indicators, telemetry data and more. Similarly, enlist Q-SYS Reflect Enterprise Manager to remotely monitor and manage the integrity of your system from anywhere, and even allow an offsite technician to identify and troubleshoot issues from any web browser.

SEAMLESS Q-SYS EXPERIENCE FOR ENTERTAINMENT VENUES AND COMPLEXES

PL Series performance loudspeakers are part of a comprehensive Q-SYS system portfolio that delivers a holistic audio, video and control experience for the entire venue. Whether you need foreground reinforcement for your performance area, background music in the lobbies or ancillary areas, collaboration in the meeting rooms, wide area audio distribution or third-party device integration and automation, the Q-SYS Platform ties these pieces to deliver a uniquely tailored experience throughout.

Q-SYS PL-SUB15 SPECIFICATIONS

selectable in Q-SYS; cardioid setup requires minimum two (2) units
System bandwidth (-10dB with EQ)| 38-100 Hz Sub crossover = 80
38-110 Hz Sub crossover = 100
38-140 Hz Sub crossover = 125
System sensitivity| 97.5 dB 1 W/1 m catalogue
Max SPL (continuous)¹| 139 dB @ 1 m
System power rating²| 75 Vrms, continuous power 900 W @ 8 Ω, rated power 1800 W @ 8 Ω
System impedance| 8 Ω
Enclosure material| Exterior plywood
Enclosure color| Black (RAL 9011
Grille thickness| 16 Ga, 1.5 mm
Connectors| 2x SPEAKON NL4 (connector not provided)
1x Euroblock (parallel to Speakon): solid wire 8-24 AWG, 4 poles
The connector is recessed and may be covered by an IP65 sealing plate.
Weatherization| IP54
External plywood
Stainless screws
Treated grille vs. UV and corrosion
Hydrophobic stainless steel mesh behind grille
Polyurea paint
Input cup (IP65) sealing with gland
Recommended amplifiers| Q-SYS CX-Q Series 4ch network amplifiers – up to two (2) loudspeakers per channel on CX-Q 8K4
Dimensions (HxWxD)| 14.7 x 23.5 x 27.1 in (375 x 598 x 690 mm)
Weight| 80 lb (36.3 kg)
Accessories| PL-SUB15-AF array frame
Deployment| 4xM10 on bottom
4xM10 on side
Array frame

+1·800·854·4079 | +1·714·754·6175 | WWW.QSYS.COM

© 2023 QSC, LLC all rights reserved. QSC, LLC’s trademarks include but are not limited to Q-SYS™, Q-SYS logo, and all trademarks are listed under www.qsys.com/trademarks, some of which are registered in the U.S. and/or other
countries. All other trademarks are the property of their respective owners.
5/19/2023

Specifications:

• Product Name: Q-SYS PL-SUB15 Passive installation subwoofer

• Transducers: LF: 15 in (380 mm), 4 in (100 mm) voice coil

• Enclosure Configuration: Passive subwoofer with bass reflex enclosure

• Coverage: Omni-directional or cardioid radiation modes selectable in Q-SYS; cardioid setup requires minimum two (2) units

• System Bandwidth: 38-100 Hz Sub crossover = 80, 38-110 Hz Sub crossover = 100, 38-140 Hz Sub crossover = 125

• System Sensitivity: 97.5 dB 1 W/1 m catalogue, 139 dB @ 1 m

• Power Handling: Continuous power 900 W @ 8 Ω, rated power 1800 W @ 8 Ω

• System Impedance: 8 Ω

• Enclosure Material: Exterior plywood

• Enclosure Color: Black (RAL 9011)

• Grille Thickness: 16 Ga, 1.5 mm

• Connectors: 2x SPEAKON NL4, 1x Euroblock

• Weatherization: IP54 rating, polyurea paint, stainless screws, hydrophobic steel mesh, input cup sealing with gland

• Recommended Amplifiers: Q-SYS CX-Q Series

• Dimensions: 14.7 x 23.5 x 27.1 in (375 x 598 x 690 mm)

• Weight: 80 lb (36.3 kg)

Frequently Asked Questions (FAQ):

Q: Can I use only one unit of Q-SYS PL-SUB15 for cardioid setup?

A: No, a minimum of two units are required for cardioid setup.

Q: What is the recommended amplifier for Q-SYS PL-SUB15?

A: The recommended amplifiers are Q-SYS CX-Q Series.

References

• Q-SYS - Cloud-manageable Audio, Video and Control
• Trademark Usage Guidelines | Q-SYS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>