OTTOCAST CP79 Wireless Android Auto Adapter User Manual
- June 3, 2024
- ottocast
Table of Contents
OTTOCAST CP79 Wireless Android Auto Adapter
READ ME FIRST
This adapter is designed for Android smartphones to use Android Auto
wirelessly on factory car multimedia system which has built-in wired Android
Auto function.
| Function | Convert OEM wired Android Auto to wireless |
|---|---|
| Compatibility | Cars with OEM Android Auto |
Control
| OEM touch screen, steering wheel, and joystick control
Input Power| USB 5V~1A
Connectivity| WiFi & Bluetooth
What’s in the box
- Wireless adapter *1
- USB cable (Type-C to A) *1
- USB cable (Type-C to C) *1
- User manual *1
Connection diagram
NOTE! The adapter should be plugged into the Android Auto-enabled USB port if there are multi USB ports in your car.
Setting up wireless Android Auto
- Install Android Auto on your smartphone, next enable [Wireless Android Auto] in Android Auto app settings.
- Pair your smartphone with the vehicle’s Bluetooth.
- Plug the adapter into your vehicle’s Android Autoenabled USB port.
- Continue to pair your smartphone with the adapter’s Bluetooth: [AUTO-xxxx].
It will then connect to Android Auto wirelessly after a few seconds.
Firmware update
Firmware update is NOT recommended when every function works well.
-
If you have connected to the Android Auto wirelessly, disable Bluetooth and forget the WiFi network first
-
Join the adapter’s WiFi network [AUTO-xxxx] again by manual and the password is 88888888 (Tap YES if there is a pop-up notification of internet access)
-
Enter 192.168.1.101 on smartphone browser, next tap “Switch P2P”
-
On your phone, go to WiFi >> Advanced settings>> WiFi direct, tap [AUTO-xxxx] and make sure it has connected
- Enter 192.168.1.101 again on smartphone browser, next tap “Update”.
NOTE! The blue led indicator will flash rapidly while updating. Wait for
more 30s after the light is always on, then disconnect and reconnect the
adapter from USB port to finish the whole update.
How to report an issue
-
Any issue while using the adapter, you could directly report the issue online and send us the feedback screenshot. We will fix it as soon as possible.
-
Follow the 1-4 steps of [Firmware update] on the previous page, then enter 192.168.1.101 again on the browser to submit the issue.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference；
- this device must accept any interference received, including interference that may cause undesired operation.
TRADEMARKS
- Google, Google Play, Android, Android Auto, are trademarks of Google Inc., registered in the U.S. and other countries. Apple, iPhone, iPad, and CarPlay are trademarks of Apple Inc., registered in the U.S. and other countries.
- We are not affiliated with Google Inc. or Apple Inc. All other product and service names mentioned are the trademarks of their respective companies.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>